Hammond
Showing 1273–1296 of 2350 resultsSorted by price: high to low
-
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and Cabinets
Swing-Out Sectional Wall Mount Rack Cabinet HWC Series – (HWC3027USR)
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and CabinetsSwing-Out Sectional Wall Mount Rack Cabinet HWC Series – (HWC3027USR)
Looking for a dust-tight cabinet? Add a solid or window door along with the HWCF Cabinet Sealing and Filter Kit.
Features
- Available in three (3) heights, two (2) widths and two (2) depths.
- Optional locking doors are constructed in 16-gauge steel. The door installs in minutes and is available in the vented, tinted window and solid options.
- The main body is constructed in 16-gauge welded steel and includes four (4) vents for optional fans on the sides of the cabinet.
- The main body can be installed to swing from left-to-right or right-to-left.
- Includes one (1) pair of adjustable depth 10-32 tapped EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include cutouts for optional 1U 19″ accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws.
Rear Section Features
- The heavy-duty rear bracket is constructed in 14-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 3.00″, 2.00”, 1.38” and 1.12” conduit knockouts are located on the top and bottom.
- Fan knockouts/cable access is located on the top and bottom.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting.
- Large openings in the rear for cable access.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
Specifications
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces fingerprints and marks.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: HWC3027USR -
Hammond, Rack Mounting Solutions, Wall Mount Racks, Wall Mount Racks and Cabinets
Adjustable Depth Hinged Wall Rack APB Series – (APB19007BK1)
Hammond, Rack Mounting Solutions, Wall Mount Racks, Wall Mount Racks and CabinetsAdjustable Depth Hinged Wall Rack APB Series – (APB19007BK1)
Features:
- Available in 4U, 6U, 8U and 12U mounting heights.
- Hinged for easy rear access.
- Adjusts in depth from 12″ to 18″ with ease so there is no need to disassemble the whole rack to adjust the depth.
- Rear cable access with multiple tie points for cable management.
- Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.
Specifications
- Constructed in 14-gauge steel.
- Tapped 10-32 19″ mounting rails are constructed in 14-gauge steel and include rack unit indicators.
- SCREW1032-25, 25-pack of 10-32 mounting hardware included.
- Load rated for up to 100 lbs (45 kg).
- Swing weight is rated for 1.5 lbs (0.68 kg) per rack unit, evenly distributed.
- Finished in RAL9005 black powder paint.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: APB19007BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails URR Series – (URR36U)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails URR Series – (URR36U)
Features:
- Constructed in 12-gauge steel.
- Sold in pairs.
- EIA/TIA compliant drilled and tapped 10-32 holes.
Rack Mounting hardware is sold separately. - Rails come included with rack unit indicator.
- Rails can be used for 19″, 23″ and 24″ rack mounting applications.
- Also compatible with RB-2PW wall rack and 24″ wide HWC wall cabinet.
- Side of rail folded for rear support or accessory mounting.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: URR36U -
General Accessories, Hammond, Rack Accessories, Rack Mounting Solutions
Chassis Sliding Rack Rail Kit RSLIDE Series – (RSLIDE28)
General Accessories, Hammond, Rack Accessories, Rack Mounting SolutionsChassis Sliding Rack Rail Kit RSLIDE Series – (RSLIDE28)
Adjustable sliding rail kit for chassis. The perfect DIY solution for allowing equipment to rackmount and slide.
Features
- Heavy duty double rail, ball bearing type equipment slides.
- Adjustable depth.
- Sold in pairs.
- Mounts two (2) pairs of 19″ mounting rails.
- Rack mounting hardware sold separately.
- Supports up to 16.64″ equipment width between the slides.
- The slides feature a stopping mechanism, preventing the shelf from accidentally falling out of the slide tray.
- Up to 145 lbs (65 kg) in weight capacity.
- Slides are tested to BIFMA Standards with load capacity @ 12 times/minute for 55000 cycles minimum.
- Zinc plated finish.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
SKU: RSLIDE28 -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Horizontal Finger Cable Manager RB-HFM Series – (RB-HFMD4)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHorizontal Finger Cable Manager RB-HFM Series – (RB-HFMD4)
Features:
- Metal components constructed in 16-gauge steel.
- Three (3) inch length fingers constructed in black plastic.
- Snap-on, hinged door.
- Includes cutouts at rear for cable pass-through.
- Fits standard EIA compliant mounting rails.
- Metal components finished in textured RAL9005 black powder paint.
- Requires mounting hardware.
- RoHS and REACH compliant.
Part of the Rack Basics® line of economy rack solutions.
SKU: RB-HFMD4 -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Horizontal Lacing Strip HCM Series – (HCM192BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHorizontal Lacing Strip HCM Series – (HCM192BK)
Features:
- Constructed of 14 gauge steel.
- Steel organizer or provides cable strain relief.
- Available with either 90 or 45-degree offset.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HCM192BK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails H1R Series – (H1TRR12U24BK)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails H1R Series – (H1TRR12U24BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1TRR12U24BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU42UWH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray with PDU Support H1PDU Series – (H1PDU42UWH)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U ” 70.25”
- H1 45U ” 75.50”
- H1 48U ” 80.75”
- H1 52U ” 87.75”
SKU: H1PDU42UWH -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UBK)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U ” 70.25”
- H1 45U ” 75.50”
- H1 48U ” 80.75”
- H1 52U ” 87.75”
SKU: H1PDU45UBK -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Centered Shelf DNDM Series – (DNDMS19BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Centered Shelf DNDM Series – (DNDMS19BK1)
Features
- 16-gauge steel construction.
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips are folded for extra strength & become equipment retainers.
- Rugged textured black powder paint finish.
- The solid version is available in either 19″ or 23″ rack panel width.
- Tested to nearly double the suggested load rating of 200 lbs (91 kg).
- Finished in textured RAL9005 black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNDMS19BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
10-32 Tapped Mounting Rail CLTR Series – (CLTR21U)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions10-32 Tapped Mounting Rail CLTR Series – (CLTR21U)
Features:
- Constructed in 12-gauge steel
- Sold in pairs
- EIA compliant drilled and tapped 10-32 holes
- Rails come numbered in 1U (1.75″) increments.
- Bolts vertically in rack to amhal struts.
- Use with CLC Series Cabinets.
- Include mounting hardware for installation in cabinet.
- Rails are compatible for 19″ and 23″ rack mounting where applicable.
- Finished in smooth black powder paint.
SKU: CLTR21U -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Cable Management Arm CGUIDE Series – (CGUIDE)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsCable Management Arm CGUIDE Series – (CGUIDE)
Features
- Designed to fit standard EIA rails.
- Helps eliminate cable stress and keep cables organized.
- Mounts to rear rack rail and rear of sliding equipment.
- Includes four (4) 10-32 mounting screws, two (2) washers and nuts.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CGUIDE -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CCR35TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CCR35TZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CCR35TZPL -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Vented Top Panel C2TV Series – (C2T2431VBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsVented Top Panel C2TV Series – (C2T2431VBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Provides passive airflow venting for cabinets.
- CE versions include cable entry grommets in all four (4) corners.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T2431VBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2436FLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2436FLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2436FLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2431FLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2431FLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2431FLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2431VFBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2431VFBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2431VFBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2436FBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2436FBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2436FBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2431FBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2431FBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2431FBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Casters and Leveling Feet, Hammond, Rack Accessories, Rack Mounting Solutions
Cabinet Caster Set 1425B Series – (1425BLSOFT)
Casters and Leveling Feet, Hammond, Rack Accessories, Rack Mounting SolutionsCabinet Caster Set 1425B Series – (1425BLSOFT)
Features
- Ball bearing, swivel and hard composition phenolic wheels.
- Includes mounting hardware.
- Plated zinc finish.
- TAA compliant for GSA Schedule purchases.
- RoHS and REACH Compliant.
- Manufactured in North America.
SKU: 1425BLSOFT -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Four Post Mounting Zero Space Fixed Shelf RZVS Series – (RZVS1926BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesFour Post Mounting Zero Space Fixed Shelf RZVS Series – (RZVS1926BK1)
Features
- Constructed of heavy-duty 14 gauge steel.
- Attaches to the side of both pairs of rack combination rails.
- No obstruction to front panel space or equipment.
- Requires no front rail mounting or front rack space.
- Vented to provide a sturdy shelf without obstructing upward heat movement.
- The rear lip is folded up for extra strength & acts as a rear equipment retainer.
- The rear lip is covered with a rubber channel to avoid equipment scratching and cable chafing.
- Sides folded up for easy hardware installation from above.
- Sides are slotted for easy adjustment with most rail depth locations.
- Rugged textured RAL9005 black powder paint finish.
- Tested to nearly double the suggested load rating of 170 lbs (77 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Please note that to mount this product you need to have two (2) pairs of combination rails within your cabinet. This product does not mount to the front and back of the rails like traditional rack mounting shelves.
If used with our CPR square hole rails you will need to order CPRSA rail adaptor for each shelf ordered.
SKU: RZVS1926BK1
