Hammond
Showing 1225–1248 of 2350 resultsSorted by price: high to low
-
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Horizontal Lacing Strip HCM Series – (HCM194BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHorizontal Lacing Strip HCM Series – (HCM194BK)
Features:
- Constructed of 14 gauge steel.
- Steel organizer or provides cable strain relief.
- Available with either 90 or 45-degree offset.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HCM194BK -
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Grounding Bar and Bus Bars BUSBAR Series – (CBB70)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsGrounding Bar and Bus Bars BUSBAR Series – (CBB70)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CBB70 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1583-S Series – (1583H6C1S)
Features
- Designed for power distribution from the rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With lighted on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug in transformers.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1583H6C1S -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1583-S Series – (1583H6C1SBK)
Features
- Designed for power distribution from the rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With lighted on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug in transformers.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1583H6C1SBK -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1582-S Series – (1582H6C1S)
Features
- Designed for power distribution from the front of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with lighted on/off switch or red pilot light to indicate power on.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Green indicator light confirms surge module is active.
- Internal protection will disconnect the surge module at the end of it’s useful life (and extinguish the green light) but will maintain power to the load, now unprotected.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1582H6C1S -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1582-S Series – (1582H6C1SBK)
Features
- Designed for power distribution from the front of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with lighted on/off switch or red pilot light to indicate power on.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Green indicator light confirms surge module is active.
- Internal protection will disconnect the surge module at the end of it’s useful life (and extinguish the green light) but will maintain power to the load, now unprotected.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1582H6C1SBK -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Sliding Keyboard Shelf RAKS Series – (RAKS24BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesSliding Keyboard Shelf RAKS Series – (RAKS24BK1)
Features
- Designed to fit all standard 17 inch wide keyboards.
- Shelf slides for keyboard storage when not in use.
- Requires two (2) pairs of mounting rails.
- The suggested load capacity of 129 lbs (59 kg).
- Slides are tested to BIFMA Standards with load capacity @ 12 times/minute for 55000 cycles minimum.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note: Keyboard not included.
SKU: RAKS24BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Square Hole Punched Mounting Rail CPR Series – (CPR49SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsSquare Hole Punched Mounting Rail CPR Series – (CPR49SZPL)
Features:
- Constructed in 12-gauge steel
- Sold in pairs
- EIA compliant square hole punched (allows choice of cage nuts for 10-32 or 12-24 or M6 thread cage nuts).
- Rails come stamped and numbered in 1U (1.75″) increments.
- Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Mounting hardware included:
- Strut mounting hardware (for both rails).
- Starter quantity (25) of 10-32 cage nuts
- Rails are compatible for 19″and 24″ rack mounting.
- Side of rail for rear support or accessory mounting (compatible with server slides).
- Finished in Zinc steel plate.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Square Hole L-Rail Rack Units Height CPR35SZPL 20U 35.00 CPR42SZPL 24U 42.00 CPR49SZPL 28U 49.00 CPR56SZPL 32U 56.00 CPR63SZPL 36U 63.00 CPR70SZPL 40U 70.00 CPR77SZPL 44U 77.00 CPR78SZPL 45U 78.75 CPR85SZPL 49U 85.75 SKU: CPR49SZPL -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T48C116)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T48C116 -
Assembled, Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Colocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCST42BK)
Assembled, Hammond, Rack Mounting Solutions, Server Racks and CabinetsColocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCST42BK)
The co-location rack cabinet system from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features.
Features
- Available in 44U mounting height.
- Available in 36”, 42” and 48″ depths.
- One single frame allows multiple bay configurations.
- Compatible with containment system and cable-trough accessories.
- Flush-mounted doors with locking swing handle.
- Side cable pass-thru knockouts.
- Optional solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Where applicable, the divider shelves are constructed of reinforced 16-gauge steel.
- The shelves are designed to support the most robust of equipment such as tower servers.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to frame, side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
PCI DSS Compliance
The CLC series is PCI-Compliant when:
- Multiple cabinets are connected together and/or the open side is closed in using the appropriate side panel (listed in the accessory table below).
- The cable manager security plates CLCCMSP are installed.
- The cable manager security covers CLCCMSC are installed.
Included Components
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs (Per bay) of adjustable depth EIA compliant square hole punched mounting rails.
- One (1) removable side panel (with 1/4 turn latches). An additional side panel is sold separately.
- Two (2) (Per bay) perforated front door (65% open area vented) with locking swing handle.
- Vented bay divider shelf with rear removable panels for vertical PDU installation.
Note: Cabinet TOP panels are NOT included and are sold separately. (See table below)
SKU: CLCST42BK -
Electrical, General Accessories, Hammond, Panels and Panel Accessories
Eclipse Rack Panel ERP Series – (ERP2424)
Electrical, General Accessories, Hammond, Panels and Panel AccessoriesEclipse Rack Panel ERP Series – (ERP2424)
Features
- Provides 19″ rack mounting with full EIA spacing (punched holes).
- Rack mounting units available in 4U, 6U and 8U (mounting rails not included).
- Rails pivot 180 degrees for easy equipment mounting.
- Includes starter pack of mounting hardware and panel installation hardware.
- Maintains UL, CSA and NEMA ratings when field installed.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
The ERP was designed for use with the HLP*UR swivel rail system.
Be sure to order the ERP that fits your enclosure and the desired HLP*UR.
SKU: ERP2424
