Wall Mount Racks

The Hammond Wall Mount Rack (HWMR) series was designed to easily mount network equipment in IT environments with limited floor space. Unlike similar racks, Hammond has integrated both depth adjustment and center swing capabilities in one rugged open rack system. Available in 12U, 20U, 24U and 32U rack unit options the HWMR can easily adjust in depth from eighteen to twenty-four inches to accommodate a wide range of equipment sizes.

Features

• Braces and rack rails are constructed of 12-gauge steel, while the other body components are constructed of 16-gauge steel.
• EIA compliant 10-32 tapped rails with 19” mounting and rack unit indicators.
• Rack frame swings (in both directions) at the center providing convenient equipment access without exceeding the rack footprint. 
• Adjustable total variable depth from 18” to 24” using slots for easy set-up and adjusting.
• Variable usable depth from 15.1″ to 21.1″
  • Top and Bottom rack units have a usable depth from 12.4″ to 18.4″.
• Three (3) spring pin positions allow for simplified equipment maintenance.
• Side and rear cable access with multiple tie points for cable management.
• Finished in RAL9005 black powder paint.
• Knockdown design ships unassembled for easy handling and shipping protection.
• Tested to nearly double the suggested load rating of 220 lbs (100 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Included in the Box

• HWMR components and assembly hardware.
• Assembly bulletin.
• Wall mounting template for easy 16-inch center installation. (Wall mounting hardware not included)
• Starter pack of SCREW1032-50 screws.

You might also like our RB-2PW Fixed Wall Rack.

The Hammond Wall Mount Rack (HWMR) series was designed to easily mount network equipment in IT environments with limited floor space. Unlike similar racks, Hammond has integrated both depth adjustment and center swing capabilities in one rugged open rack system. Available in 12U, 20U, 24U and 32U rack unit options the HWMR can easily adjust in depth from eighteen to twenty-four inches to accommodate a wide range of equipment sizes.

Features

• Braces and rack rails are constructed of 12-gauge steel, while the other body components are constructed of 16-gauge steel.
• EIA compliant 10-32 tapped rails with 19” mounting and rack unit indicators.
• Rack frame swings (in both directions) at the center providing convenient equipment access without exceeding the rack footprint. 
• Adjustable total variable depth from 18” to 24” using slots for easy set-up and adjusting.
• Variable usable depth from 15.1″ to 21.1″
  • Top and Bottom rack units have a usable depth from 12.4″ to 18.4″.
• Three (3) spring pin positions allow for simplified equipment maintenance.
• Side and rear cable access with multiple tie points for cable management.
• Finished in RAL9005 black powder paint.
• Knockdown design ships unassembled for easy handling and shipping protection.
• Tested to nearly double the suggested load rating of 220 lbs (100 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Included in the Box

• HWMR components and assembly hardware.
• Assembly bulletin.
• Wall mounting template for easy 16-inch center installation. (Wall mounting hardware not included)
• Starter pack of SCREW1032-50 screws.

You might also like our RB-2PW Fixed Wall Rack.

The SDC Series is a multi-use rack providing numerous options for equipment rack mounting. It is ideal for securing rack-mount equipment in spaces where room for a traditional rack or cabinet is limited or not available. The modular design includes a body with numerous accessory options to suit your unique application.

Features

• Available in 3U, 6U and 9U mounting heights.
• Available in 17.5″, 24.5″, 31.5″ and 36″ overall depths.
• 19″ Mounting rail slots allow for adjustable depth rails and/or optional fan installation.
  • Mounting rails are easily removed for non-rack mounting equipment.
  • Starter pack of CAGKIT1032-10 screws and cage nuts included with 3U units or CAGKIT1032-50 screws and cage nuts included with 6U & 9U units.
• Removable cover panel for ease of equipment installation.
• Includes four (4) cutouts perfect for mounting over an electrical receptacle and/or for cable entry.
• Interior cable management lances.
• Removable plastic handles for side mounting storage.
• Optional surface mounted doors with quarter-turn lock and end cap available.

Specifications

• Cabinet frame, removable cover and doors constructed in 16-gauge steel.
• Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are finished in smooth black powder paint.
• Suggest Load Ratings
  • Wall Mount (Rack Mounted) up to 150 lbs (68 kg).
  • Wall Mount (Rails removed) up to 50 lbs (22 kg).
  • Ceiling/ Under Desk Mount up to 150 lbs (68 kg).
  • Freestanding (with or without casters) up to 800 lbs (362 kg).
• Grounding studs are provided on the frame as well as side panels and doors.
• Finished in sand textured RAL9005 black powder paint.
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Optional Accessory Features

• Locking Vented Door includes a quarter turn-key lock. The 63% perforation provides airflow for either the front and/or rear of the frame.
   
• Locking Solid Door includes a quarter turn-key lock.
   
• Locking Cable/Fan Door includes two openings for rear cable entry that maintain security while allowing cables to enter the cabinet. The door also includes laser knockouts for optional fan kits.
   
• Conduit/Fan Panel mounts directly to either end of the cabinet providing secure mounting of 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8” conduit knockouts. Also includes laser knockouts for optional fan kits

The SDC Series is a multi-use rack providing numerous options for equipment rack mounting. It is ideal for securing rack-mount equipment in spaces where room for a traditional rack or cabinet is limited or not available. The modular design includes a body with numerous accessory options to suit your unique application.

Features

• Available in 3U, 6U and 9U mounting heights.
• Available in 17.5″, 24.5″, 31.5″ and 36″ overall depths.
• 19″ Mounting rail slots allow for adjustable depth rails and/or optional fan installation.
  • Mounting rails are easily removed for non-rack mounting equipment.
  • Starter pack of CAGKIT1032-10 screws and cage nuts included with 3U units or CAGKIT1032-50 screws and cage nuts included with 6U & 9U units.
• Removable cover panel for ease of equipment installation.
• Includes four (4) cutouts perfect for mounting over an electrical receptacle and/or for cable entry.
• Interior cable management lances.
• Removable plastic handles for side mounting storage.
• Optional surface mounted doors with quarter-turn lock and end cap available.

Specifications

• Cabinet frame, removable cover and doors constructed in 16-gauge steel.
• Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are finished in smooth black powder paint.
• Suggest Load Ratings
  • Wall Mount (Rack Mounted) up to 150 lbs (68 kg).
  • Wall Mount (Rails removed) up to 50 lbs (22 kg).
  • Ceiling/ Under Desk Mount up to 150 lbs (68 kg).
  • Freestanding (with or without casters) up to 800 lbs (362 kg).
• Grounding studs are provided on the frame as well as side panels and doors.
• Finished in sand textured RAL9005 black powder paint.
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Optional Accessory Features

• Locking Vented Door includes a quarter turn-key lock. The 63% perforation provides airflow for either the front and/or rear of the frame.
   
• Locking Solid Door includes a quarter turn-key lock.
   
• Locking Cable/Fan Door includes two openings for rear cable entry that maintain security while allowing cables to enter the cabinet. The door also includes laser knockouts for optional fan kits.
   
• Conduit/Fan Panel mounts directly to either end of the cabinet providing secure mounting of 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8” conduit knockouts. Also includes laser knockouts for optional fan kits

Features

• The rails are constructed in 12-gauge steel while the body is constructed in 14-gauge steel.
• EIA compliant 10-32 tapped rails with 19” mounting and rack unit indicators.
• Provides 18 inches of usable depth.
  • An optional RB-2PW-EXT extender can be used to add up to 7″ of usable mounting depth while maintaining the load capacity.
• Open-rear design can be installed over existing equipment.
• Finished in RAL9005 black powder paint.
• Knockdown design ships unassembled for easy handling and shipping protection.
• Includes starter pack of SCREW1032-25 screws.
• Tested up to nearly double the suggested load rating of 200 lbs (90.72 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Need a different height? Purchase our 8U version and the desired height of our URR Rack Rails (Add 4U to the desired height). Note we only approve the weight capacity up to 20U.

Features

• The rails are constructed in 12-gauge steel while the body is constructed in 14-gauge steel.
• EIA compliant 10-32 tapped rails with 19” mounting and rack unit indicators.
• Provides 18 inches of usable depth.
  • An optional RB-2PW-EXT extender can be used to add up to 7″ of usable mounting depth while maintaining the load capacity.
• Open-rear design can be installed over existing equipment.
• Finished in RAL9005 black powder paint.
• Knockdown design ships unassembled for easy handling and shipping protection.
• Includes starter pack of SCREW1032-25 screws.
• Tested up to nearly double the suggested load rating of 200 lbs (90.72 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Need a different height? Purchase our 8U version and the desired height of our URR Rack Rails (Add 4U to the desired height). Note we only approve the weight capacity up to 20U.

Features:

• Available in 6U, 8U and 12U mounting heights.
• Adjusts in depth from 15 to 21 inches with ease so there is no need to disassemble the whole rack to adjust the depth.
• Rear cable access with multiple tie points for cable management.
• Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.

Specifications

• Constructed in 14-gauge steel.
• 19″ rack mount punched square hole mounting rails are constructed in 14-gauge steel and include rack unit indicators.
  • 24-pack of M5 mounting hardware included.
• Load rated for up to 95 lbs (43 kg).
• Finished in RAL9005 black powder paint.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Features:

• Available in 4U, 6U, 8U and 12U mounting heights.
• Hinged for easy rear access.
• Adjusts in depth from 12″ to 18″ with ease so there is no need to disassemble the whole rack to adjust the depth.
• Rear cable access with multiple tie points for cable management.
• Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.

Specifications

• Constructed in 14-gauge steel.
• Tapped 10-32 19″ mounting rails are constructed in 14-gauge steel and include rack unit indicators.
  • SCREW1032-25, 25-pack of 10-32 mounting hardware included.
• Load rated for up to 100 lbs (45 kg).
  • Swing weight is rated for 1.5 lbs (0.68 kg) per rack unit, evenly distributed.
• Finished in RAL9005 black powder paint.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Features:

• Available in 4U, 6U, 8U and 12U mounting heights.
• Hinged for easy rear access.
• Adjusts in depth from 12″ to 18″ with ease so there is no need to disassemble the whole rack to adjust the depth.
• Rear cable access with multiple tie points for cable management.
• Knockdown design ships unassembled for easy handling reduced freight cost and shipping protection.

Specifications

• Constructed in 14-gauge steel.
• Tapped 10-32 19″ mounting rails are constructed in 14-gauge steel and include rack unit indicators.
  • SCREW1032-25, 25-pack of 10-32 mounting hardware included.
• Load rated for up to 100 lbs (45 kg).
  • Swing weight is rated for 1.5 lbs (0.68 kg) per rack unit, evenly distributed.
• Finished in RAL9005 black powder paint.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Features

• The rails are constructed in 12-gauge steel while the body is constructed in 14-gauge steel.
• EIA compliant 10-32 tapped rails with 19” mounting and rack unit indicators.
• Provides 18 inches of usable depth.
  • An optional RB-2PW-EXT extender can be used to add up to 7″ of usable mounting depth while maintaining the load capacity.
• Open-rear design can be installed over existing equipment.
• Finished in RAL9005 black powder paint.
• Knockdown design ships unassembled for easy handling and shipping protection.
• Includes starter pack of SCREW1032-25 screws.
• Tested up to nearly double the suggested load rating of 200 lbs (90.72 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Need a different height? Purchase our 8U version and the desired height of our URR Rack Rails (Add 4U to the desired height). Note we only approve the weight capacity up to 20U.

Features:

• Constructed in 14-gauge steel.
• 19″ mounting EIA tapped 10-32 mounting rails.
• Horizontal or vertical equipment mounting.
• Rear cable access for cable management.
  • Side cable access is included for the 6U rack.
• Finished in RAL9005 black powder paint.
• Includes a package of ten (10) SCREW1032-10 screws.
• Tested to nearly double the suggested load rating of 135 lbs (61 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

The VPB196UBK can also be rack-mounted to a 2-post rack to provide for vertical rack mounting for deep equipment.

Features:

• Constructed in 14-gauge steel.
• 19″ mounting EIA tapped 10-32 mounting rails.
• Horizontal or vertical equipment mounting.
• Rear cable access for cable management.
  • Side cable access is included for the 6U rack.
• Finished in RAL9005 black powder paint.
• Includes a package of ten (10) SCREW1032-10 screws.
• Tested to nearly double the suggested load rating of 135 lbs (61 kg).
• TAA Compliant.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

The VPB196UBK can also be rack-mounted to a 2-post rack to provide for vertical rack mounting for deep equipment.