Hammond
Showing 1297–1320 of 2350 resultsSorted by price: high to low
-
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1582-S Series – (1582H6B1S)
Features
- Designed for power distribution from the front of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with lighted on/off switch or red pilot light to indicate power on.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Green indicator light confirms surge module is active.
- Internal protection will disconnect the surge module at the end of it’s useful life (and extinguish the green light) but will maintain power to the load, now unprotected.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1582H6B1S -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Four Post Fixed Depth Shelf RF Series – (RFVS1931BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesFour Post Fixed Depth Shelf RF Series – (RFVS1931BK1)
Features
- Constructed of heavy-duty 14 gauge steel.
- Front & rear lip folded for extra strength.
- The versatile design can be used upside down (front & rear lip become equipment retainers).
- Sides folded up for easy hardware installation from above.
- Sides are slotted for easy adjustment with most rail depth locations.
- Includes all mounting hardware.
- Tested to nearly double the suggested load rating of 350 lbs (159 kg).
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Please note that to mount this product you need to have two (2) pairs of combination rails within your cabinet. This product does not mount to the front and back of the rails like traditional rack mounting shelves.
If used with our CPR square hole rails you will need to order CPRSA rail adaptor for each shelf ordered.
SKU: RFVS1931BK1 -
Angle Supports, Hammond, Rack Accessories, Rack Mounting Solutions
Rackmount Adjustable Angle Bracket RAAB Series – (RAAB3648BK)
Angle Supports, Hammond, Rack Accessories, Rack Mounting SolutionsRackmount Adjustable Angle Bracket RAAB Series – (RAAB3648BK)
The Rackmount Adjustable Angle Bracket (RAAB) is designed to support the weight of non rack mounted heavy equipment. It is also useful for front-only rack mounted equipment. Available in two depth ranges the RAAB can support up to 200 lbs and can adjust from 24 up to 48 inches in depth.
Features
- Constructed in 16-gauge steel.
- Angles mount to 19″, 23″ or 24″ EIA rack mounting rails.
- Requires two pairs of mounting rails.
- Designed to support equipment such as servers, switchgear as well as computer/server chassis on their side.
- The free-floating design easily adjusts in depth to accommodate different equipment dimensions.
- Two adjustable depth options.
- Sold in pairs.
- Finished in smooth RAL9005 black powder paint.
- Requires mounting hardware.
- Tested to nearly double the suggested load rating of 200 lbs (91 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: RAAB3648BK -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T42D1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T42D1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589H42D1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeSKU: 1589H42D1 -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1583-S Series – (1583H8A1S)
Features
- Designed for power distribution from the rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With lighted on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug in transformers.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1583H8A1S -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Mounting Adjustable Shelf DNRMA Series – (DNRMA1920BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Mounting Adjustable Shelf DNRMA Series – (DNRMA1920BK1)
Features
- 14-Gauge steel construction.
- Movable side brackets allow mounting inside or outside rack at 4 different depths
- Designed mainly for open relay racks – works panel mounted on any rack
- Choice of 16-inch or 20-inch deep.
- Available in either 19-inch rack panel width
- Knockdown design ships unassembled for easy handling and shipping protection.
- Tested to nearly double the suggested load rating of 275 lbs (125 kg).
- Finished in rugged textured RAL9005 black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNRMA1920BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CPR42SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CPR42SZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CPR42SZPL -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails C4PR Series – (C4PR2442SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails C4PR Series – (C4PR2442SZPL)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in cabinet.
- Use with C4 and C4RR Cabinet series.
- Includes strut mounting hardware (for both rails).
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
10-32 Tapped Rail Features
- Constructed in 10-gauge steel
- EIA compliant drilled and tapped 10-32 holes
Square Hole Punched Rail Features
- Constructed in 12-gauge steel
- EIA compliant square hole punched (allows choice of cage nuts for 10-32, https://ats-staging.hikmsystems.com/product/c4pr2442szpl/, 1/4-20 or M6 cage nuts).
SKU: C4PR2442SZPL -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Centered Shelf DNDM Series – (DNDMS23BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Centered Shelf DNDM Series – (DNDMS23BK1)
Features
- 16-gauge steel construction.
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips are folded for extra strength & become equipment retainers.
- Rugged textured black powder paint finish.
- The solid version is available in either 19″ or 23″ rack panel width.
- Tested to nearly double the suggested load rating of 200 lbs (91 kg).
- Finished in textured RAL9005 black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNDMS23BK1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Centered Shelf DNDM Series – (DNDMS1924BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Centered Shelf DNDM Series – (DNDMS1924BK1)
Features
- 16-gauge steel construction.
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips are folded for extra strength & become equipment retainers.
- Rugged textured black powder paint finish.
- The solid version is available in either 19″ or 23″ rack panel width.
- Tested to nearly double the suggested load rating of 200 lbs (91 kg).
- Finished in textured RAL9005 black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNDMS1924BK1
