-
×
Premium Wall Mounts - WMCM - 48'' Height - White - Solid Doors - Swing Handle with Fan - Great Lakes Data Racks and Cabinets
1 × $1,991.27
Subtotal: $1,991.27
Showing 3841–3864 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Type 12 Mild Steel Two Door Wallmount Enclosure 1422 Series – (1422UX12) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Wallmount Enclosure 1422 Series – (1422UX12) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Enclosures are formed 14 gauge steel with 12 gauge steel inner panels. Exceptions are 42″x60″ and 48″x48″ which are formed 12 gauge steel with 10 gauge steel inner panels.
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Body stiffeners are provided in enclosures 30” high or more for extra rigidity.
- Welded brackets provide for enclosure mounting.
- Gasketed overlapping doors eliminate the need for a center post.
- Continuously hinged doors may be removed by pulling the hinge pin.
- Doors are secured with a three point latch and operated with a key locking automotive type handle.
- Latch rods are equipped with rollers for easier door closing.
- Oil resistant gaskets are permanently secured.
- A removable 10 gauge inner panel is included in enclosures as noted.
- Smaller sizes include a 12 gauge inner panel.
- Collar studs are provided for mounting inner panels.
- A grounding stud is provided in the enclosure and a bonding stud is provided on the door.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating on the inside and outside.
- Removable inner panel is finished in white powder coating.
Accessories
Additional Inner Panels
Door Stop Kit
Enclosure Stabilizers
Floor Stand Kit
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Panel Part No. H W D H W 1422P8 24.00 42.00 8.00 21.00 39.00 1422PW8 24.00 48.00 8.00 21.00 45.00 1422P10 24.00 42.00 10.00 21.00 39.00 1422R10 30.00 42.00 10.00 27.00 39.00 1422RW10 30.00 48.00 10.00 27.00 45.00 1422RX10 30.00 60.00 10.00 27.00 57.00 1422UV12 36.00 42.00 12.00 33.00 39.00 1422UW12 36.00 48.00 12.00 33.00 45.00 1422UX12 36.00 60.00 12.00 33.00 57.00 1422VV12 42.00 42.00 12.00 39.00 39.00 1422VW12 42.00 48.00 12.00 39.00 45.00 1422VX12 42.13 60.06 12.69 38.00 56.00 1422WW12 48.13 48.06 12.69 44.00 44.00 SKU: 1422UX12 -
Armored Cable, MTP/MPO Kit
(Part Number: MATS24-OM4-100-PU) 24 Strand 100FT OM4 nanoFIBER Stainless Steel Armored Fiber Optic Cable PU Black Tactical High Flex – Armored Fiber Cable – Armored Fiber Optic Cables – Custom Armored Fiber Cables – Armored Fiber Patch Cords – Armored Fiber Patch Cables – Armored Fiber Optic Assemblies – TAA Armor Fiber Optic Cable – TAA Armored Fiber Optic Cable
Armored Cable, MTP/MPO Kit(Part Number: MATS24-OM4-100-PU) 24 Strand 100FT OM4 nanoFIBER Stainless Steel Armored Fiber Optic Cable PU Black Tactical High Flex – Armored Fiber Cable – Armored Fiber Optic Cables – Custom Armored Fiber Cables – Armored Fiber Patch Cords – Armored Fiber Patch Cables – Armored Fiber Optic Assemblies – TAA Armor Fiber Optic Cable – TAA Armored Fiber Optic Cable
MTP/MPO Kit Includes 2 Cassettes and one MTP-MTP cable
SKU: MATS24-OM4-100-PU -
Armored Cable, MTP/MPO Kit
(Part Number: MATS12-OM1-500-PU) 12 Strand 500FT OM1 nanoFIBER Stainless Steel Armored Fiber Optic Cable PU Black Tactical High Flex – Armored Fiber Cable – Armored Fiber Optic Cables – Custom Armored Fiber Cables – Armored Fiber Patch Cords – Armored Fiber Patch Cables – Armored Fiber Optic Assemblies – TAA Armor Fiber Optic Cable – TAA Armored Fiber Optic Cable
Armored Cable, MTP/MPO Kit(Part Number: MATS12-OM1-500-PU) 12 Strand 500FT OM1 nanoFIBER Stainless Steel Armored Fiber Optic Cable PU Black Tactical High Flex – Armored Fiber Cable – Armored Fiber Optic Cables – Custom Armored Fiber Cables – Armored Fiber Patch Cords – Armored Fiber Patch Cables – Armored Fiber Optic Assemblies – TAA Armor Fiber Optic Cable – TAA Armored Fiber Optic Cable
MTP/MPO Kit Includes 2 Cassettes and one MTP-MTP cable
SKU: MATS12-OM1-500-PU -
Discontinued Products
Type 12 Mild Steel Modular Freestanding Enclosure HME Series – (HME1866) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Modular Freestanding Enclosure HME Series – (HME1866) (DISCONTINUED)
Application
- The HME product line provides users with a rugged housing for industrial control and operator interface in industrial environments.
- Modular design permits joining of units together for large scale and mixed use applications.
- Frame’s 25mm hole pattern provides extensive component and accessory mounting flexibility.
- A broad range of industry standard sizes are offered.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529 IP54
Configuration
- Frame
- Removable solid top panel
- Lifting eyebolts (4)
- Removable bottom panel w/gland plates
- Solid front door with door frame
- Removable rear cover panel
- Inner mounting panel
Construction
- Formed 14 gauge steel.
- Fully welded frame with 25mm hole pattern for superior mounting flexibility.
- Foam gasket on all openings provides a dust-tight seal.
- Reinforced eyebolts are provided for easy enclosure lifting.
- Frames can be joined together with an optional joining kit.
- Doors can be easily interchanged, removed and/or reversed.
- Door opening 135°.
- Optional formed 14 gauge steel side panels are sold separately (in pairs).
- Bonding and grounding studs are provided for all doors and panels.
Finish
- Phosphatized and finished in RAL 7035 light gray powder coating.
- Inner panel is unpainted galvanized 12 gauge steel.
Accessories
Side Mounting Inner Panels
Side Mounting Barrier Panels
Additional Inner Panels
Bridge Panel
Grid System
Mounting Hardware
HME Handles
19″ Rails and Width Adaptor Kit
Frame Joining Kit
Side Panels
Plinth- Climate Control
- Lighting
Additional HME Accessories- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Enclosure Inner Panel Part No. H W D H W HME1465 1400 600 500 1296 499 HME1466 1400 600 600 1296 499 HME1468 1400 600 800 1296 499 HME1485 1400 800 500 1296 699 HME1486 1400 800 600 1296 699 HME1488 1400 800 800 1296 699 HME1665 1600 600 500 1496 499 HME1666 1600 600 600 1496 499 HME1668 1600 600 800 1496 499 HME1685 1600 800 500 1496 699 HME1686 1600 800 600 1496 699 HME1688 1600 800 800 1496 699 HME1864 1800 600 400 1696 499 HME1865 1800 600 500 1696 499 HME1866 1800 600 600 1696 499 HME1868 1800 600 800 1696 499 HME1884 1800 800 400 1696 699 HME1885 1800 800 500 1696 699 HME1886 1800 800 600 1696 699 SKU: HME1866 -
Discontinued Products
Type 4 Mild Steel Wallmount Disconnect Enclosure 1447S HK Series – (1447SL16HK) (DISCONTINUED)
Discontinued ProductsType 4 Mild Steel Wallmount Disconnect Enclosure 1447S HK Series – (1447SL16HK) (DISCONTINUED)
Application
- Designed to house the following safety disconnect equipment:
- ABB Controls flange-mounted variable depth operating mechanism for disconnect switches and circuit breakers. Also cable version for circuit breakers.
- Allen Bradley 1494V variable depth flange mounted disconnect switches and circuit breaker operators. Will not accept Allen Bradley 1494F disconnect switches, 1494D circuit breaker operators.
- C-H Westinghouse C361 flange mounted variable depth operating mechanism with disconnect switches and C371 flange mounted variable depth operating mechanisms for circuit breakers. Also Flex-Shaft™ handle mechanisms for circuit breakers.
- General Electric Type STDA flange handles and variable depth operating mechanism for disconnect switches and circuit breakers. Also SpectraFlex™ cable operators for circuit breakers.
- Siemens I-T-E Max-Flex™ flange mounted variable depth handles for disconnect switches and circuit breakers.
- Square D class 9422 disconnect switches with flange mounted variable depth operating mechanisms or cable mechanisms and Class 9422 flange-mounted variable depth operating mechanisms or cable mechanisms for circuit breakers. Will not accept Square D Class 9422 bracket-mounted disconnect devices, 9422TG1 or TG2 devices
- Refer to the Type 12 Wallmount Selection Guide.
Standards
- UL 508A Type 4, 12, and 13
- CSA Type 4, 12, and 13
- Complies with
- NEMA Type 4, 12 and 13
- IEC 60529, IP66
- Appropriate components are required to maintain these standards.
Construction
- Formed 14-gauge steel.
- Continuously welded seams.
- Larger sizes include door and body stiffeners.
- Welded brackets provide for enclosure mounting.
- Formed lip on enclosure exclude flowing liquids and contaminants.
- Seamless poured-in place gasket.
- Cutouts and holes are provided to suit the flange handle operating mechanism.
- Continuously hinged doors may be removed by pulling the hinge pin.
- Pad lock defeater handle mechanism is provided along with latching rods and interlock brackets.
- Collar studs are provided for mounting inner panels.
- A removable 12 gauge inner panel is included.
- A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
- A literature pocket is provided.
Finish
- Cover and enclosure are finished in ANSI61 gray powder coat finish inside and out.
- Inner panel finished in white powder coat finish.
Note
- Disconnects, operating mechanisms are not provided with the enclosure, and must be ordered separately from the manufacturer.
Accessories
- Additional Inner Panels
- Door Stop Kit
- Floor Stand Kit
- Enclosure Stabilizers
Drip Shield Kit- Window Kits
- Climate Control
- Lighting
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
- Designed to house the following safety disconnect equipment:
