SC/UPC SM Attenuator F-M 12dB Metal SKU: ATDS105186 Subtotal: $9.22
Wall Mount Racks
Showing 1–24 of 27 resultsSorted by price: high to low
-
Kendall Howard, Racks and Cabinets, Swing-Out, Wall Mount Racks
(Part Number: 1915-3-800-18) – 18U Phantom Class® Open Frame Swing-Out Rack
Kendall Howard, Racks and Cabinets, Swing-Out, Wall Mount Racks(Part Number: 1915-3-800-18) – 18U Phantom Class® Open Frame Swing-Out Rack
Description
The 18U Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs., with a 20″ usable depth. The 90 degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.
- One set of 10-32 tapped rails
- 150 lb. weight capacity
- 20″ usable mounting depth
- 19″ EIA compliant
- Ships knocked down
- Made in the USA
- Limited Lifetime Warranty
1U 20″ Vented Rack Mountable Sliding Shelf-Data Sheet
1U 20″ Vented Rack Mountable Sliding Shelf Cut Sheet
1u-20%e2%80%b3-rack-mountable-sliding-shelfSKU: 1915-3-800-18 -
Kendall Howard, Racks and Cabinets, Side Load, Wall Mount Racks
(Part Number: 1915-3-200-12) – 12U Side Load Wall Mount Rack
Kendall Howard, Racks and Cabinets, Side Load, Wall Mount Racks(Part Number: 1915-3-200-12) – 12U Side Load Wall Mount Rack
Description
The Kendall Howard Side Load Wall Mount Rack is an open frame rack with a twist…literally. The rack mounts sideways allowing you to install equipment from side to side. This innovative concept not only allows you to install deeper equipment than most other wall mount racks, but you also have clear and easy access to the front and rear of the devices. With a weight capacity of up to 350 lbs., this side loading wall rack is a great solution for servers, battery backups, and other heavy rackmount components.
- 20″ fixed mounting depth
- 350 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
15U LINIER® Swing-Out Wall Mount Cabinet – Vented Door-Data Sheet
15U LINIER® Swing-Out Wall Mount Cabinet – Vented Door Cut Sheet
15u-linier-swing-out-wall-mount-cabinet-vented-door-3132-3-001-15-instructionsSKU: 1915-3-200-12 -
Kendall Howard, Racks and Cabinets, Side Load, Wall Mount Racks
(Part Number: 1915-3-200-08) – 8U Side Load Wall Mount Rack
Kendall Howard, Racks and Cabinets, Side Load, Wall Mount Racks(Part Number: 1915-3-200-08) – 8U Side Load Wall Mount Rack
Description
The Kendall Howard Side Load 8U Wall Mount Rack is an open frame rack with a twist…literally. The rack mounts sideways, allowing you to install equipment from side to side. This innovative concept not only allows you to install deeper equipment than most other wall mount racks, but you also have clear and easy access to the front and rear of the devices. With a weight capacity of up to 350 lbs., this side-loading wall rack is a great solution for servers, battery backups, and other heavy rackmount components.
- 20″ fixed mounting depth
- 350 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
18U LINIER® Swing-Out Wall Mount Cabinet – Vented Door-Data Sheet
18U LINIER® Swing-Out Wall Mount Cabinet – Vented Door Cut Sheet
18u-linier-swing-out-wall-mount-cabinet-vented-door-3132-3-001-18-instructionsSKU: 1915-3-200-08 -
Kendall Howard, Racks and Cabinets, Swing-Out, Wall Mount Racks
(Part Number: 1915-3-800-12) – 12U Phantom Class® Open Frame Swing-Out Rack
Kendall Howard, Racks and Cabinets, Swing-Out, Wall Mount Racks(Part Number: 1915-3-800-12) – 12U Phantom Class® Open Frame Swing-Out Rack
Description
The 12U Phantom Class® Open Frame Swing-Out Rack is truly in a class of its own. The unrivaled quality allows you to install rackmount equipment up off the floor, and it can easily support up to 150 lbs, with its 20″ usable depth. The 90 degree swing-out provides installers the access they need to install and manage patch panels, routers, hubs, switches, cabling, and other networking devices.
- One set of 10-32 tapped rails
- 150 lb. weight capacity
- 20″ usable mounting depth
- 19″ EIA compliant
- Ships knocked down
- Made in the USA
- Limited Lifetime Warranty
1U 20″ Rack Mountable Sliding Shelf-Data Sheet
1U 20″ Rack Mountable Sliding Shelf Cut Sheet
1u-20%e2%80%b3-rack-mountable-sliding-shelfSKU: 1915-3-800-12 -
Kendall Howard, Pivot Frame, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-400-08) – 8U Pivot Frame Wall Mount Rack
Kendall Howard, Pivot Frame, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-400-08) – 8U Pivot Frame Wall Mount Rack
Description
The 8U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections – a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12″ depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack. Be sure to also check out the Pivot Frame Wall Mount Rack Cover and Pivot Frame Stationary Rackmount Brackets.
- Compatible with the 4U and 8U Pivot Frame Wall Mount Rack
- 10-32 tapped rails (10-32 rack screws sold separately)
- Includes 12 10-32 rack screws
- Optional Pivot Frame Wall Mount Rack Cover available (Sold separately)
- Optional Pivot Frame Stationary Rackmount Brackets available (Sold separately)
- 12″ depth
- 19″ EIA compliant
- 90 degree swing down
- 75 lb. weight capacity
- Made in the USA
- Limited Lifetime Warranty
41U 4 Post Knockdown Open Frame Rack-Data Sheet
41U 4-Post Knockdown Open Frame Rack Cut Sheet
41u-knockdown-4-post-open-frame-rack-1943-3-100-41-instructionsSKU: 1915-3-400-08 -
Kendall Howard, Pivot Frame, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-400-04) – 4U Pivot Frame Wall Mount Rack
Kendall Howard, Pivot Frame, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-400-04) – 4U Pivot Frame Wall Mount Rack
Description
The 4U Pivot Frame Wall Mount Rack makes network equipment installation and maintenance easy for installers. Its pivot feature allows the rackmount frame to swing down and stop at 90 degrees, giving installers full access to the rear of equipment. Even when in the open/down position, the rack can withstand the force of punching down multiple connections – a feature especially helpful when installing patch panels. The Pivot Frame Wall Mount Rack is built with a 12″ depth making it suitable for network and telecom devices such as patch panels, network switches, routers, and more. Its modular design allows you to mount multiple racks above and/or below each other creating a larger rack solution. Ample cable routing is available with the open frame design, as well as the laser knockouts on either side of the rack. Gain full access to all sides of your equipment with the Pivot Frame Wall Mount Rack.
- 10-32 tapped rails
- 12″ depth
- 90 degree swing down
72″ Performance 300 Series® LAN Station – African Mahogany-Data Sheet
72″ Performance 300 Series® LAN Station – African Mahogany Cut Sheet
performance-300-400-series-lan-station-instructionsSKU: 1915-3-400-04 -
Kendall Howard, Modular, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-001-12) – 12U Wall Mount Rack
Kendall Howard, Modular, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-001-12) – 12U Wall Mount Rack
Description
The Kendall Howard 12U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19″ EIA or 23″ EIA rackmount equipment. The generous 18″ depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 12U Modular Wall Mount Rack is perfect for any application.
10-32 Rack Screws Bulk Pack – 5000 Pack-Data Sheet
10-32 Rack Screws – 5000 Pack Cut Sheet
10-32-rack-screws-w-washers-50-pack-0100-1-011-01-instructionsSKU: 1915-3-001-12 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-500-15) – 15U 18″ Deep Open Frame Wall Rack
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-500-15) – 15U 18″ Deep Open Frame Wall Rack
Description
The 18 Deep Open Frame Wall Rack has a feature-rich, dual frame design making it easy for IT technicians to install. This sturdy, open frame rack permits 18 of usable depth to house network switches, patch panels, A/V devices, and other non-rackmountable equipment. For convenient cable routing in and around the installed equipment, use any of the cable lacing points found on the top and bottom of this 2-piece open wall rack. The 18 Deep Open Frame Wall Rack is sleek, with a simplistic design, making it a strong and durable solution for your next network system.
- Two-piece design
- 18 usable depth
- 10-32 tapped rails
- Includes 25 rack screws
- Ships knockdown
- 130 lb. weight capacity
- 19 EIA compliant
- Made in the USA
- Limited Lifetime Warranty
42U LINIER® Server Cabinet – No Doors – 36″ Depth-Data Sheet
42U LINIER® Server Cabinet – No Doors – 36″ Depth Cut Sheet
42u-linier-server-cabinet-no-doors-36-depth-3180-3-001-42-instructionsSKU: 1915-3-500-15 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-301-21) – 21U V-Line Wall Mount Rack – 18″ Depth
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-301-21) – 21U V-Line Wall Mount Rack – 18″ Depth
Description
The Kendall Howard 21U 18″ Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 21U 18″ Deep V-Line Wall Mount Rack.
- 18″ usable depth
- Cage Nut or 10-32 Tapped Rails
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
2U 14.75″ Economy Rack Shelf-Data Sheet
2U 14.75″ Economy Rack Shelf Cut Sheet
2u-14-75-economy-rack-shelf-3000-1-003-02-instructionsSKU: 1915-3-301-21 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-300-21) – 21U V-Line Wall Mount Rack – 12″ Depth
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-300-21) – 21U V-Line Wall Mount Rack – 12″ Depth
Description
Kendall Howard V-Line Open Frame Fixed Wall Mount Racks are the perfect low cost solution that IT installers and A/V technicians use every day. Kendall Howard knockdown 21U Fixed Wall Racks are incredibly easy to assemble and install.
- 12″ usable depth
- Cage Nut or 10-32 Tapped Rails
- Self-squaring design
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
1U Rackmount 4-Post Sliding Keyboard Tray-Data Sheet
1U Rackmount 4-Post Sliding Keyboard Tray Cut Sheet
1u-rackmount-4-post-keyboard-tray-1910-3-003-01-instructionsSKU: 1915-3-300-21 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-500-08) – 8U 18″ Deep Open Frame Wall Rack
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-500-08) – 8U 18″ Deep Open Frame Wall Rack
Description
The 18 Deep Open Frame Wall Rack has a feature-rich, dual frame design making it easy for IT technicians to install. This sturdy, open frame rack permits 18 of usable depth to house network switches, patch panels, A/V devices, and other non-rackmountable equipment. For convenient cable routing in and around the installed equipment, use any of the cable lacing points found on the top and bottom of this 2-piece open wall rack. The 18 Deep Open Frame Wall Rack is sleek, with a simplistic design, making it a strong and durable solution for your next network system.
- Two-piece design
- 18 usable depth
- 10-32 tapped rails
- Includes 25 rack screws
- Ships knockdown
- 130 lb. weight capacity
- 19 EIA compliant
- Made in the USA
- Limited Lifetime Warranty
42U LINIER® Server Cabinet – Glass/Vented Doors – 36″ Depth-Data Sheet
42U LINIER® Server Cabinet – Glass/Vented Doors – 36″ Depth Cut Sheet
42u-linier-server-cabinet-glass-vented-doors-36-depth-3100-3-001-42-instructionsSKU: 1915-3-500-08 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-301-16) – 16U V-Line Wall Mount Rack – 18″ Depth
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-301-16) – 16U V-Line Wall Mount Rack – 18″ Depth
Description
The Kendall Howard 16U 18″ Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 16U 18″ Deep V-Line Wall Mount Rack.
- 18″ usable depth
- Cage Nut or 10-32 Tapped Rails
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
2U 12″ Economy Rack Shelf-Data Sheet
2U 12″ Economy Rack Shelf Cut Sheet
2u-12-economy-rack-shelf-3000-1-002-02-instructionsSKU: 1915-3-301-16 -
Kendall Howard, Modular, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-001-08) – 8U Wall Mount Rack
Kendall Howard, Modular, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-001-08) – 8U Wall Mount Rack
Description
The Kendall Howard 8U Wall Mount Rack was the first of its kind! It did not take long for this rack to become the standard that all wall mount racks are measured against. The two-piece design offers unlimited flexibility. This innovative design can adjust to any width so it can house either 19″ EIA or 23″ EIA rackmount equipment. The generous 18″ depth has enough room for cables, switches, routers, and so much more. Whether you are mounting it under a desk, on a wall, or to the ceiling, the 8U Modular Wall Mount Rack is perfect for any application.
Flanged Lacing Bar – 10 pack-Data Sheet
Flanged Lacing Bar – 10 pack Cut Sheet
3-d-flanged-lacing-bar-1903-1-101-00-instructionsSKU: 1915-3-001-08 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-301-12) – 12U V-Line Wall Mount Rack – 18″ Depth
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-301-12) – 12U V-Line Wall Mount Rack – 18″ Depth
Description
The Kendall Howard 12U 18″ Deep V-Line Wall Mount Rack is the perfect low cost solution for IT installers and A/V technicians to use on a daily basis. Its open frame design makes the rack easy to assemble and install, while its durability makes this rack reliable for years to come. For a simple and dependable open frame solution, check out the 12U 18″ Deep V-Line Wall Mount Rack.
- 18″ usable depth
- Cage Nut or 10-32 Tapped Rails
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
2U 14.75″ Vented Economy Rack Shelf-Data Sheet
2U 14.75″ Vented Economy Rack Shelf Cut Sheet
2u-14-75-vented-economy-rack-shelf-3000-1-103-02-instructionsSKU: 1915-3-301-12 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-300-16) – 16U V-Line Wall Mount Rack – 12″ Depth
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-300-16) – 16U V-Line Wall Mount Rack – 12″ Depth
Description
Kendall Howard V-Line Open Frame Fixed Wall Mount Racks are the perfect low cost solution that IT installers and A/V technicians use every day. Kendall Howard knockdown 16U Fixed Wall Racks are incredibly easy to assemble and install.
- 12″ usable depth
- Cage Nut or 10-32 Tapped Rails
- Self-squaring design
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
1U Rackmount 2-Post Sliding Keyboard Tray-Data Sheet
1U Rackmount 2-Post Sliding Keyboard Tray Cut Sheet
1u-rackmount-2-post-keyboard-tray-1910-3-002-01-instructionsSKU: 1915-3-300-16 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1915-3-300-12) – 12U V-Line Wall Mount Rack – 12″ Depth
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1915-3-300-12) – 12U V-Line Wall Mount Rack – 12″ Depth
Description
The Kendall Howard 12U V-Line Wall Mount Rack is the perfect entry level solution for IT installers, musicians, audio/visual technicians, and anyone else in the telecom industry. When a simple open frame wall mount rack is needed, the Kendall Howard V-Line Open Frame Fixed Wall Mount Rack is a great option.
- 12″ usable depth
- Cage Nut or 10-32 Tapped Rails
- Self-squaring design
- 19″ EIA compliant
- Made in the USA
12-24 Rack Screws w/ Washers – 100 Pack-Data Sheet
12-24 Rack Screws w/ Washers – 100 Pack Cut Sheet
10-32-rack-screws-w-washers-50-pack-0100-1-011-01-instructionsSKU: 1915-3-300-12 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-100-6) – 6U V-Rack with Cage Nut Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-100-6) – 6U V-Rack with Cage Nut Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with cage nut-style rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Low profile design
- Cage Nut rails
- Does not include hardware
- 6U V-Rack – Cage Nut
- No depth restrictions
- 120 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
60″ Performance Plus Accessory Bar Kit-Data Sheet
60″ Performance Plus Accessory Bar Kit Cut Sheet
60-performance-plus-accessory-bar-kit-7000-3-560-00-instructionsSKU: 1916-2-100-6 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-101-06) – 6U V-Rack with Tapped Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-101-06) – 6U V-Rack with Tapped Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with 10-32 tapped rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Low profile design
- Tapped rails
- Includes 24 10-32 Rack Screws
- 6U V-Rack – Tapped Rails
- No depth restrictions
- 120 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
48″ Performance Plus Accessory Bar Kit-Data Sheet
48″ Performance Plus Accessory Bar Kit Cut Sheet
48-performance-plus-accessory-bar-kit-7000-3-548-00-instructionsSKU: 1916-2-101-06 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-101-05) – 5U V-Rack with Tapped Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-101-05) – 5U V-Rack with Tapped Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with 10-32 tapped rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Low profile design
- Tapped rails
- Includes 24 10-32 Rack Screws
- 5U V-Rack – Tapped Rails
- No depth restrictions
- 120 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
36″ Performance Plus Accessory Bar Kit-Data Sheet
36″ Performance Plus Accessory Bar Kit Cut Sheet
36-performance-plus-accessory-bar-kit-7000-3-536-00-instructionsSKU: 1916-2-101-05 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-100-5) – 5U V-Rack with Cage Nut Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-100-5) – 5U V-Rack with Cage Nut Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with cage nut-style rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Low profile design
- Cage Nut rails
- Does not include hardware
- 5U V-Rack – Cage Nut
- No depth restrictions
- 120 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
60″ Training Table Cable Management Enclosure-Data Sheet
60″ Training Table Cable Management Enclosure Cut Sheet
training-table-cable-management-enclosure-instructionsSKU: 1916-2-100-5 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-100-4) – 4U V-Rack with Cage Nut Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-100-4) – 4U V-Rack with Cage Nut Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with cage nut-style rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Does not include hardware – rack screws sold separately
- Low profile design
- Universal cage nut style rail
- No depth restrictions
- 150 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
72″ Performance 300 Series® LAN Station – Folkstone-Data Sheet
72″ Performance 300 Series® LAN Station – Folkstone Cut Sheet
performance-300-400-series-lan-station-instructionsSKU: 1916-2-100-4 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-100-3) – 3U V-Rack with Cage Nut Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-100-3) – 3U V-Rack with Cage Nut Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with cage nut-style rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Does not include hardware – rack screws sold separately
- Low profile design
- Universal cage nut style rails
- No depth restrictions
- 150 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
24″ Performance 300 Series® LAN Station – African Mahogany-Data Sheet
24″ Performance 300 Series® LAN Station – African Mahogany Cut Sheet
performance-300-400-series-lan-station-instructionsSKU: 1916-2-100-3 -
Bracket, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-3-200-06) – 6U Patch Panel Bracket
Bracket, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-3-200-06) – 6U Patch Panel Bracket
Description
Kendall Howard Patch Panel Brackets make mounting patch panels or shallow equipment simple and easy. When there is no need for a wall mount rack or cabinet, Patch Panel Brackets are a great low cost alternative.
- 180 degree swing-out
- 6″ maximum depth
- 19″ EIA compliant
- Requires 10-32 Rack Screws
- Made in the USA
- Limited Lifetime Warranty
1U Cable Lacing Shelf-Data Sheet
1U Cable Lacing Shelf Cut Sheet
1u-cable-lacing-shelf-1903-1-200-01-instructionsSKU: 1916-3-200-06 -
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks
(Part Number: 1916-2-100-2) – 2U V-Rack with Cage Nut Rails
Fixed, Kendall Howard, Racks and Cabinets, Wall Mount Racks(Part Number: 1916-2-100-2) – 2U V-Rack with Cage Nut Rails
Description
Kendall Howard V-Racks is our space-saving solution for mounting servers or other rack-mountable devices in a versatile manner. Our V-Racks, equipped with cage nut-style rails, are perfect for smaller rackmount equipment. Whether you want to mount them vertically or horizontally, these racks can accommodate devices of any depth. Designed to be wall-mounted or placed under a desk, the Kendall Howard V-Rack offers the flexibility to position your products wherever you need them while optimizing space utilization.
- Does not include hardware – rack screws sold separately
- Low profile design
- Universal cage nut style rails
- No depth restrictions
- 150 lb. weight capacity
- 19″ EIA compliant
- Made in the USA
- Limited Lifetime Warranty
60″ Performance 300 Series® LAN Station – African Mahogany-Data Sheet
60″ Performance 300 Series® LAN Station – African Mahogany Cut Sheet
performance-300-400-series-lan-station-instructionsSKU: 1916-2-100-2