Wall Mount Cabinets

Features

• Available in two (2) depths and four (4) heights.
• All sizes include either vented 63% perforated front door or smoked window front door.
• Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
  • Starter pack of SCREW1032-50 screws.
• Center section features:
  • Heavy-duty spring-hinge pin for easy installation and removal.
  • Sides that include two (2) vents and a fan grill.
  • Can be installed to swing from left-to-right or right-to-left.
• Rear section features:
  • The side of the rear section includes 2.50” and 2.00” knockouts.
  • The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
  • Generous cable management lances are located on the rear section as well as on mounting rails.
  • Mounting points for outlet strips.
  • Heavy-duty keyhole for wall mounting.
  • Large opening in the rear for cable access.
• The front locking door and center section keyed the same (optional key available).

Specifications

• 14-gauge welded rear section; 16-gauge center section and doors.
• EIA compliant adjustable depth mounting rails.
• Grounding lugs located on top and bottom of the door, center and rear sections.
• UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
• Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

Videos

Looking for a dust-tight cabinet? Add a solid or window door along with the HWCF Cabinet Sealing and Filter Kit.

Features

• Available in three (3) heights, two (2) widths and two (2) depths.
• Optional locking doors are constructed in 16-gauge steel. The door installs in minutes and is available in the vented, tinted window and solid options.
• The main body is constructed in 16-gauge welded steel and includes four (4) vents for optional fans on the sides of the cabinet.
• The main body can be installed to swing from left-to-right or right-to-left.
• Includes one (1) pair of adjustable depth 10-32 tapped EIA compliant mounting rack rails. 
  • Thirty (30) inch wide mounting rails include cutouts for optional 1U 19″ accessories, such as cable management or power bars.
  • 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
• Includes starter pack of SCREW1032-50 screws.

Rear Section Features

• The heavy-duty rear bracket is constructed in 14-gauge welded steel and features a spring-hinge pin for easy installation and removal.
• 2.50” and 2.00” conduit knockouts are located on the side.
• 3.00″, 2.00”, 1.38” and 1.12” conduit knockouts are located on the top and bottom.
• Fan knockouts/cable access is located on the top and bottom.
• Numerous cable management mounting points are included.
• Heavy-duty keyhole for wall mounting.
• Large openings in the rear for cable access.
• Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.

Specifications

• UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
• Rugged sand-textured black powder paint reduces fingerprints and marks.
• Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Features

• Available in two (2) depths and four (4) heights.
• All sizes include either vented 63% perforated front door or smoked window front door.
• Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
  • Starter pack of SCREW1032-50 screws.
• Center section features:
  • Heavy-duty spring-hinge pin for easy installation and removal.
  • Sides that include two (2) vents and a fan grill.
  • Can be installed to swing from left-to-right or right-to-left.
• Rear section features:
  • The side of the rear section includes 2.50” and 2.00” knockouts.
  • The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
  • Generous cable management lances are located on the rear section as well as on mounting rails.
  • Mounting points for outlet strips.
  • Heavy-duty keyhole for wall mounting.
  • Large opening in the rear for cable access.
• The front locking door and center section keyed the same (optional key available).

Specifications

• 14-gauge welded rear section; 16-gauge center section and doors.
• EIA compliant adjustable depth mounting rails.
• Grounding lugs located on top and bottom of the door, center and rear sections.
• UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
• Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

Videos

Looking for a dust-tight cabinet? Add a solid or window door along with the HWCF Cabinet Sealing and Filter Kit.

Features

• Available in three (3) heights, two (2) widths and two (2) depths.
• Optional locking doors are constructed in 16-gauge steel. The door installs in minutes and is available in the vented, tinted window and solid options.
• The main body is constructed in 16-gauge welded steel and includes four (4) vents for optional fans on the sides of the cabinet.
• The main body can be installed to swing from left-to-right or right-to-left.
• Includes one (1) pair of adjustable depth 10-32 tapped EIA compliant mounting rack rails. 
  • Thirty (30) inch wide mounting rails include cutouts for optional 1U 19″ accessories, such as cable management or power bars.
  • 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
• Includes starter pack of SCREW1032-50 screws.

Rear Section Features

• The heavy-duty rear bracket is constructed in 14-gauge welded steel and features a spring-hinge pin for easy installation and removal.
• 2.50” and 2.00” conduit knockouts are located on the side.
• 3.00″, 2.00”, 1.38” and 1.12” conduit knockouts are located on the top and bottom.
• Fan knockouts/cable access is located on the top and bottom.
• Numerous cable management mounting points are included.
• Heavy-duty keyhole for wall mounting.
• Large openings in the rear for cable access.
• Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.

Specifications

• UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
• Rugged sand-textured black powder paint reduces fingerprints and marks.
• Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Looking for a dust-tight cabinet? Add a solid or window door along with the HWCF Cabinet Sealing and Filter Kit.

Features

• Available in three (3) heights, two (2) widths and two (2) depths.
• Optional locking doors are constructed in 16-gauge steel. The door installs in minutes and is available in the vented, tinted window and solid options.
• The main body is constructed in 16-gauge welded steel and includes four (4) vents for optional fans on the sides of the cabinet.
• The main body can be installed to swing from left-to-right or right-to-left.
• Includes one (1) pair of adjustable depth 10-32 tapped EIA compliant mounting rack rails. 
  • Thirty (30) inch wide mounting rails include cutouts for optional 1U 19″ accessories, such as cable management or power bars.
  • 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
• Includes starter pack of SCREW1032-50 screws.

Rear Section Features

• The heavy-duty rear bracket is constructed in 14-gauge welded steel and features a spring-hinge pin for easy installation and removal.
• 2.50” and 2.00” conduit knockouts are located on the side.
• 3.00″, 2.00”, 1.38” and 1.12” conduit knockouts are located on the top and bottom.
• Fan knockouts/cable access is located on the top and bottom.
• Numerous cable management mounting points are included.
• Heavy-duty keyhole for wall mounting.
• Large openings in the rear for cable access.
• Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.

Specifications

• UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
• Rugged sand-textured black powder paint reduces fingerprints and marks.
• Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

The HLP is a perfect solution for your networking and server installations when space is tight.

Features

• Available in two (2) heights up to 41 inches of usable space, and three (3) fixed rack unit options.
• Each cabinet ships with one (1) pair of 2U 180-degree rotating mounting rack rails and one (1) pair of fixed rack rails.
  • Fixed rack mounting units available in 4U, 6U and 8U.
  • Fixed rails mount at five different angles, providing equipment mounting options.
  • Includes starter pack of SCREW1032-25 screws.
• Locking hinged front door includes side venting for airflow.
  • The door and latch can be reversed to swing left-to-right.
• The rear wall mounting section features 3.00”, 2.00”, 1.38” and 1.12” conduit knockouts on top and bottom.
• Side venting is designed for optional fans for active cooling.
• Generous cable management lances are located on the rear section.
• Heavy-duty keyhole for wall mounting. 
• Large knockouts in the rear for cable access.

Specifications

• Body and rear section constructed of 16-gauge steel.
• Rack rails are 14-gauge steel with 10-32 tapped EIA compliant mounting rails.
• The body includes dedicated bonding points which also provides the option of drill-less mounting of electrical 4×2 utility boxes.
  • Grounding kit sold separately – GRDKIT01 or GRDKIT04.
• UL Listed 2416 load rated for up to 200 lbs (90 kg). Static Load tested to 800 lbs (362 kg).
• The body and door are finished in rugged sand-textured RAL 9005 black or textured RAL 7035 light gray powder paint. The rack rails are finished in smooth white powder paint. 
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

The HLP is a perfect solution for your networking and server installations when space is tight.

Features

• Available in two (2) heights up to 41 inches of usable space, and three (3) fixed rack unit options.
• Each cabinet ships with one (1) pair of 2U 180-degree rotating mounting rack rails and one (1) pair of fixed rack rails.
  • Fixed rack mounting units available in 4U, 6U and 8U.
  • Fixed rails mount at five different angles, providing equipment mounting options.
  • Includes starter pack of SCREW1032-25 screws.
• Locking hinged front door includes side venting for airflow.
  • The door and latch can be reversed to swing left-to-right.
• The rear wall mounting section features 3.00”, 2.00”, 1.38” and 1.12” conduit knockouts on top and bottom.
• Side venting is designed for optional fans for active cooling.
• Generous cable management lances are located on the rear section.
• Heavy-duty keyhole for wall mounting. 
• Large knockouts in the rear for cable access.

Specifications

• Body and rear section constructed of 16-gauge steel.
• Rack rails are 14-gauge steel with 10-32 tapped EIA compliant mounting rails.
• The body includes dedicated bonding points which also provides the option of drill-less mounting of electrical 4×2 utility boxes.
  • Grounding kit sold separately – GRDKIT01 or GRDKIT04.
• UL Listed 2416 load rated for up to 200 lbs (90 kg). Static Load tested to 800 lbs (362 kg).
• The body and door are finished in rugged sand-textured RAL 9005 black or textured RAL 7035 light gray powder paint. The rack rails are finished in smooth white powder paint. 
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

The HLP is a perfect solution for your networking and server installations when space is tight.

Features

• Available in two (2) heights up to 41 inches of usable space, and three (3) fixed rack unit options.
• Each cabinet ships with one (1) pair of 2U 180-degree rotating mounting rack rails and one (1) pair of fixed rack rails.
  • Fixed rack mounting units available in 4U, 6U and 8U.
  • Fixed rails mount at five different angles, providing equipment mounting options.
  • Includes starter pack of SCREW1032-25 screws.
• Locking hinged front door includes side venting for airflow.
  • The door and latch can be reversed to swing left-to-right.
• The rear wall mounting section features 3.00”, 2.00”, 1.38” and 1.12” conduit knockouts on top and bottom.
• Side venting is designed for optional fans for active cooling.
• Generous cable management lances are located on the rear section.
• Heavy-duty keyhole for wall mounting. 
• Large knockouts in the rear for cable access.

Specifications

• Body and rear section constructed of 16-gauge steel.
• Rack rails are 14-gauge steel with 10-32 tapped EIA compliant mounting rails.
• The body includes dedicated bonding points which also provides the option of drill-less mounting of electrical 4×2 utility boxes.
  • Grounding kit sold separately – GRDKIT01 or GRDKIT04.
• UL Listed 2416 load rated for up to 200 lbs (90 kg). Static Load tested to 800 lbs (362 kg).
• The body and door are finished in rugged sand-textured RAL 9005 black or textured RAL 7035 light gray powder paint. The rack rails are finished in smooth white powder paint. 
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

The HLP is a perfect solution for your networking and server installations when space is tight.

Features

• Available in two (2) heights up to 41 inches of usable space, and three (3) fixed rack unit options.
• Each cabinet ships with one (1) pair of 2U 180-degree rotating mounting rack rails and one (1) pair of fixed rack rails.
  • Fixed rack mounting units available in 4U, 6U and 8U.
  • Fixed rails mount at five different angles, providing equipment mounting options.
  • Includes starter pack of SCREW1032-25 screws.
• Locking hinged front door includes side venting for airflow.
  • The door and latch can be reversed to swing left-to-right.
• The rear wall mounting section features 3.00”, 2.00”, 1.38” and 1.12” conduit knockouts on top and bottom.
• Side venting is designed for optional fans for active cooling.
• Generous cable management lances are located on the rear section.
• Heavy-duty keyhole for wall mounting. 
• Large knockouts in the rear for cable access.

Specifications

• Body and rear section constructed of 16-gauge steel.
• Rack rails are 14-gauge steel with 10-32 tapped EIA compliant mounting rails.
• The body includes dedicated bonding points which also provides the option of drill-less mounting of electrical 4×2 utility boxes.
  • Grounding kit sold separately – GRDKIT01 or GRDKIT04.
• UL Listed 2416 load rated for up to 200 lbs (90 kg). Static Load tested to 800 lbs (362 kg).
• The body and door are finished in rugged sand-textured RAL 9005 black or textured RAL 7035 light gray powder paint. The rack rails are finished in smooth white powder paint. 
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

The HLP is a perfect solution for your networking and server installations when space is tight.

Features

• Available in two (2) heights up to 41 inches of usable space, and three (3) fixed rack unit options.
• Each cabinet ships with one (1) pair of 2U 180-degree rotating mounting rack rails and one (1) pair of fixed rack rails.
  • Fixed rack mounting units available in 4U, 6U and 8U.
  • Fixed rails mount at five different angles, providing equipment mounting options.
  • Includes starter pack of SCREW1032-25 screws.
• Locking hinged front door includes side venting for airflow.
  • The door and latch can be reversed to swing left-to-right.
• The rear wall mounting section features 3.00”, 2.00”, 1.38” and 1.12” conduit knockouts on top and bottom.
• Side venting is designed for optional fans for active cooling.
• Generous cable management lances are located on the rear section.
• Heavy-duty keyhole for wall mounting. 
• Large knockouts in the rear for cable access.

Specifications

• Body and rear section constructed of 16-gauge steel.
• Rack rails are 14-gauge steel with 10-32 tapped EIA compliant mounting rails.
• The body includes dedicated bonding points which also provides the option of drill-less mounting of electrical 4×2 utility boxes.
  • Grounding kit sold separately – GRDKIT01 or GRDKIT04.
• UL Listed 2416 load rated for up to 200 lbs (90 kg). Static Load tested to 800 lbs (362 kg).
• The body and door are finished in rugged sand-textured RAL 9005 black or textured RAL 7035 light gray powder paint. The rack rails are finished in smooth white powder paint. 
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.

Features

• Available in three (3) heights
• HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
• Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
• The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
• The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
• Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails. 
  • Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
  • 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
• Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.

Specifications

• Heavy-duty rear and base are constructed in 14-gauge welded steel.
• Optional locking doors are constructed in 16-gauge steel.
• Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
• 2.50” and 2.00” conduit knockouts are located on the side.
• 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
• Numerous cable management mounting points are included.
• Heavy-duty keyhole for wall mounting and levelling feet.
• Large openings in the rear for cable access designed for mounting over electrical receptacles.
• Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
• UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
• Finished in textured RAL9005 black or RAL9003 white powder paint.
• Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Features

• Available in three (3) heights
• HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
• Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
• The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
• The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
• Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails. 
  • Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
  • 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
• Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.

Specifications

• Heavy-duty rear and base are constructed in 14-gauge welded steel.
• Optional locking doors are constructed in 16-gauge steel.
• Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
• 2.50” and 2.00” conduit knockouts are located on the side.
• 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
• Numerous cable management mounting points are included.
• Heavy-duty keyhole for wall mounting and levelling feet.
• Large openings in the rear for cable access designed for mounting over electrical receptacles.
• Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
• UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
• Finished in textured RAL9005 black or RAL9003 white powder paint.
• Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
• TAA compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.