Application

• Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
• Heavy-duty construction provides protection from dirt, dust, oil and water.
• Sloping front control panel provides an ideal surface for mounting operator controls or instrumentation.
• Interior mounting provision on removable inner panels located on the rear and sides of the enclosure.

Standards

• UL 508A Type 12
• CSA Type 12
• Complies with
  • NEMA Type 12
  • IEC 60529, IP54

Construction

• Formed 14 gauge steel.
• Smooth, continuously welded seams, without knockouts, cutouts or holes.
• Sloped front instrument panel is continuously hinged on the front (bottom) edge and secured with captive panel screws, threaded into sealed wells.
• Continuously hinged door and front instrument panel may be removed by pulling the hinge pin.
• Doors are secured with a three point latch and operated with a key locking automotive type handle.
• Oil resistant gaskets are permanently secured.
• Includes three removable inner panels formed from 12 gauge steel, mounted to the back and sides of the enclosure interior.
• Collar studs are provided for mounting inner panels.
• A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are phosphat­­ized and finished in ANSI 61 gray powder coating on the outside and on the inside.
• Removable inner panels are finished in white powder coating.

Accessories

Description  

• Designed for side mounting on any enclosure surface where high capacity system cooling is required.
• Closed loop cooling ensures clean enclosure air is recirculated 
  without ever mixing with contaminated ambient air.
• Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
• Condensor with 3 mm fin spacing, highly effective protection 
  against strongly contaminated and aggressive ambient air

Standards

• Maintains enclosure’s NEMA 12 rating
• IP 54
• UL, cUL and CE

Features

• R134a refrigerant.
• Thermostat control accessible from inside enclosure.
• Hot gas bypass valve prevents evaporator freeze up while 
  minimizing heavy inrush currents on large BTU/H units.
• Built in condensate evaporator.
• Continuous air circulation from high capacity fans.
• EMI/RFI suppression meets CE.
• Self-diagnostics on startup.
• Fault indication via LED light.
• Provision for door contact allowing power down when 
  enclosure door is opened.
• Gasket, mounting kit and template for enclosure cutout and 
  drilling are included.
• Condensate drain hose and clamp provided.

Accessories