Showing 1873–1896 of 151203 resultsSorted by price: high to low
-
Discontinued Products
(Discontinued) 5000-12000 BTU/H Indoor Air Conditioner DTS Series – (DTS3145A460LG)
Discontinued Products(Discontinued) 5000-12000 BTU/H Indoor Air Conditioner DTS Series – (DTS3145A460LG)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated
without ever mixing with contaminated ambient air. - Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
- Condensor with 3 mm fin spacing, highly effective protection
against strongly contaminated and aggressive ambient air
Standards
- Maintains enclosure’s NEMA 12 rating
- IP 54
- UL, cUL and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while
minimizing heavy inrush currents on large BTU/H units. - Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when
enclosure door is opened. - Gasket, mounting kit and template for enclosure cutout and
drilling are included. - Condensate drain hose and clamp provided.
Accessories
SKU: DTS3145A460LG -
Discontinued Products
(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTS Series – (DTS3241A230LG)
Discontinued Products(Discontinued) 4000-7000 BTU/H Indoor Air Conditioner DTS Series – (DTS3241A230LG)
Description
- Designed for side mounting on any enclosure surface where high capacity system cooling is required.
- Closed loop cooling ensures clean enclosure air is recirculated without ever mixing with contaminated ambient air.
- Optimum air circulation with maximum clearance distance between warm inlet and cold outlet for reduced hot spot locations.
Standards
- Maintains enclosure’s NEMA 12 rating
- IP 54
- UL, cUL and CE
Features
- R134a refrigerant.
- Thermostat control accessible from inside enclosure.
- Hot gas bypass valve prevents evaporator freeze up while minimizing heavy inrush currents on large BTU/H units.
- Built in condensate evaporator.
- Continuous air circulation from high capacity fans.
- EMI/RFI suppression meets CE.
- Self-diagnostics on startup.
- Fault indication via LED light.
- Provision for door contact allowing power down when enclosure door is opened.
- Gasket, mounting kit and template for enclosure cutout and drilling are included.
- Condensate drain hose and clamp provided.
Accessories
SKU: DTS3241A230LG -
Data Cabinets and Racks, Great Lakes, Power Solutions, Power Solutions, UPS, UPS
UPS Solutions Line Interactive Lead Acid – 1500VA Power Capcity / 120V /2 Post Mounting / 1 Bypass Module / 2 External Barry Pack – Great Lakes Data Racks and Cabinets
Data Cabinets and Racks, Great Lakes, Power Solutions, Power Solutions, UPS, UPSUPS Solutions Line Interactive Lead Acid – 1500VA Power Capcity / 120V /2 Post Mounting / 1 Bypass Module / 2 External Barry Pack – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-150A-120-2BP-0M-1BY-2P -
Discontinued Products
Type 12 Modular Freestanding Disconnect Enclosures HME Series – (HFMDT18164) (DISCONTINUED)
Discontinued ProductsType 12 Modular Freestanding Disconnect Enclosures HME Series – (HFMDT18164) (DISCONTINUED)
Application
- Provides users with a rugged housing for flange mount disconnect and circuit breaker requirements.
- Modular design permits joining of units together for large scale and mixed use applications.
- Frame’s 25mm hole pattern provides extensive component and accessory mounting flexibility.
- A broad range of industry standard sizes are offered.
- HME/HMET Series enclosures can be used as slave units to HFMD/HFMDT Disconnect Series.
- The flange mount disconnect units accommodate today’s most popular disconnect hardware.
- ABB Controls: Disconnect Switches up to (and including) 200 amp, also operators for ABB circuit breakers up to 800 amp.
- Allen Bradley: 1494V variable depth flange mounted disconnect up to and including 200 amp and operators for C-H Westinghouse circuit breakers up to 400 amp.
- C-H Westinghouse: C361 flange mounted disconnect switches up to and including 200 amp and C371 circuit breakers up to 600 amp, also Flex Shaft handle mechanisms for circuit breakers.
- General Electric: Type STDA flange mounted variable depth flange operators for disconnect switches up to and including 200 amp and circuit breakers up to 600 amp or Spectra Flex™ cable operators for circuit breakers.
- ITE Siemens Max-Flex: flange mounted variable depth cable operators for disconnect switches up to 200 amp and circuit breakers up to 600 amp.
- Square D: class 9422 variable depth flange mounted operating mechanisms for disconnect switches up to and including 200 amp or cable mechanism for 30, 60 or 100 amp, also circuit breakers with variable depth operators or cable mechanism up to 400 amp.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529 IP54
- Appropriate components are required to maintain these standards.
Standard Configuration
- Frame
- Removable solid top panel
- Lifting eyebolts (4)
- Removable bottom panel w/gland plates
- Solid front door(s) with door frame(s).
- Removable rear cover panel(s) – two door version with removable center post
- Inner mounting panel
- Disconnect to door handle activation hardware
- Hinged flange door
Construction
- Formed 14 gauge steel.
- Fully welded frame with 25mm hole pattern for superior mounting flexibility.
- Foam gasket on all openings provides a dust-tight seal.
- Reinforced eyebolts are provided for easy enclosure lifting.
- Frames can be joined together with an optional joining kit.
- Doors can be easily interchanged, removed and/or reversed.
- Door opening 135°.
- Optional formed 14 gauge steel side panels are sold separately (in pairs).
- Bonding and grounding studs are provided for all doors and panels.
Finish
- Phosphatized and finished in RAL 7035 light gray powder coating.
- Inner panel is unpainted galvanized 12 gauge steel.
- SPECIAL TEMPORARY NOTE: Due to industry shortages of large galvanized steel sheets, some larger inner panels will be substituted with painted steel versions.
Accessories
Interlock Kit
Side Mounting Inner Panels
Side Mounting Barrier Panels
Bridge Panel
Grid System
Mounting Hardware
Frame Joining Kit
Side Panels
Plinth
HME Handles
Climate Control
Lighting
Additional HME Accessories
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Enclosure Inner Panel Part No. H W D H W HFMDT18164 1800 1600 400 1696 1499 HFMDT18165 1800 1600 500 1696 1499 HFMDT18184 1800 1800 400 1696 1699 HFMDT18185 1800 1800 500 1696 1699 HFMDT18186 1800 1800 600 1696 1699 HFMDT20165 2000 1600 500 1896 1499 HFMDT20166 2000 1600 600 1996 1499 HFMDT20168 2000 1600 800 1896 1499 HFMDT20185 2000 1800 500 1896 1699 SKU: HFMDT18164 -
Networking
(Part – LIQDUO) – Fluke Networks LinkIQ™ Duo Cable+Network+Wi-Fi Tester – High Performance Fiber Optic Component for Reliable Network Connectivity – Fiber Instrument Sales
Networking(Part – LIQDUO) – Fluke Networks LinkIQ™ Duo Cable+Network+Wi-Fi Tester – High Performance Fiber Optic Component for Reliable Network Connectivity – Fiber Instrument Sales
High-quality Fluke Networks LinkIQ™ Duo Cable+Network+Wi-Fi Tester designed for reliable fiber optic performance, ensuring consistent signal control and durability in demanding network environments.
SKU: LIQDUO -
Discontinued Products
Type 4X Painted White Stainless Steel Wallmount Enclosure Eclipse Series – (EN4SD603612SSWH) (DISCONTINUED)
Discontinued ProductsType 4X Painted White Stainless Steel Wallmount Enclosure Eclipse Series – (EN4SD603612SSWH) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge 304 stainless steel.
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Doors are secured with a 3 point Handle in 316 stainless with pad lockable feature.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Stainless steel hinge pins and hinges.
Finish
- Cover and enclosure are finished in recoatable smooth RAL 9003 White powder coating inside and out.
Accessories
Additional Inner Panels
Swing Panel
Swing Frame
Eclipse DIN Rail Mounting Kit
Eclipse DIN Rails
Door Stop Kit
Mounting Foot Kit
Rear Hole Plugs
Drip Shield Kit
Type 12/4, 4X Handle Kits
Replacement Hinge Pins- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part No. H W EN4SD24248SSWH 24.00 24.00 8.00 EP2424 22.20 22.20 EN4SD30248SSWH 30.00 24.00 8.00 EP3024 28.20 22.20 EN4SD242010SSWH 24.00 20.00 10.00 EP2420 22.20 18.20 EN4SD242412SSWH 24.00 24.00 12.00 EP2424 22.20 22.20 EN4SD363012SSWH 36.00 30.00 12.00 EP3630 34.20 28.20 EN4SD363612SSWH 36.00 36.00 12.00 EP3636 34.20 34.20 EN4SD423612SSWH 42.00 36.00 12.00 EP4236 40.20 34.20 EN4SD483612SSWH 48.00 36.00 12.00 EP4836 46.20 34.20 EN4SD483616SSWH 48.00 36.00 16.00 EP4836 46.20 34.20 EN4SD603612SSWH 60.00 36.00 12.00 EP6036 58.20 34.20 SKU: EN4SD603612SSWH -
Assembled, Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Data Center Server Cabinet H1 Series – (H13152U48WH)
Assembled, Hammond, Rack Mounting Solutions, Server Racks and CabinetsData Center Server Cabinet H1 Series – (H13152U48WH)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing”s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
- One (1) perforated front door (79% open area vented) with locking swing handle.
- One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
SKU: H13152U48WH -
Data Cabinets and Racks, Great Lakes, Power Solutions, Power Solutions, UPS, UPS
UPS Solutions Line Interactive Lead Acid – 3000VA – C19+C13 Power Capcity / 240V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Barry Pack – Great Lakes Data Racks and Cabinets
Data Cabinets and Racks, Great Lakes, Power Solutions, Power Solutions, UPS, UPSUPS Solutions Line Interactive Lead Acid – 3000VA – C19+C13 Power Capcity / 240V /2 Post Mounting / 1 SNMP Card / 1 Bypass Module / 1 External Barry Pack – Great Lakes Data Racks and Cabinets
Suggested pricing, call for discounts
SKU: GLUPS-LILA-300A-240-1BP-1M-1BY-2P -
Discontinued Products
Type 12 Mild Steel Two Door Floormount Enclosure 1422 FM Series – (1422E16F) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Floormount Enclosure 1422 FM Series – (1422E16F) (DISCONTINUED)
Application
- Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments.
- Provides a degree of protection from falling dirt, dust, oil and water.
Standards
- UL 508A Type 12
- CSA Type 12
- Complies with
- NEMA Type 12
- IEC 60529, IP54
Construction
- Enclosures are formed steel – 14 gauge (54″ high), 12 gauge (60″ high), or combination 10/12 gauge (72″ high).
- Smooth, continuously welded seams without knockouts, cutouts or holes.
- Body stiffeners are provided in enclosures for extra rigidity.
- Heavy duty lifting eyebolts are provided with reinforced support angles.
- 12″ floor stands are welded to the enclosure. (w/ feet Part No.).
- Welded brackets provide for enclosure mounting (w/o feet Part No.).
- Gasketed overlapping doors eliminate the need for a center post.
- Continuously hinged doors may be removed by pulling the hinge pin.
- Doors are secured with a three point latch and operated with a key locking, padlockable handle.
- Latch rods are equipped with rollers for easier door closing.
- Oil resistant gaskets are permanently secured.
- A removable 10 gauge inner panel is included in enclosures 60″ and larger. Smaller sizes include a 12 gauge inner panel.
- Provision for light kit mounting.
- Panel supports are provided in enclosures 60″ and larger for easy panel installation.
- Collar studs are provided for mounting inner panels.
- A grounding stud is provided in the enclosure for each door and a bonding stud is provided on the door.
- A literature pocket is provided for the inside of the door.
Finish
- Cover and enclosure are phosphatized and finished in recoatable smooth ANSI 61 gray powder coating.
- Removable inner panel is finished in white powder coating.
Accessories
Additional Inner Panels- Door Stop Kit
Enclosure Stabilizers
Floor Stand Kit
Top Hat Cable Modules
Window Kits- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
