Showing 144073–144096 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Low Voltage PCB Mount – Universal – 2.5 VA to 56 VA 183 Series – (183E10) (DISCONTINUED)
Discontinued ProductsLow Voltage PCB Mount – Universal – 2.5 VA to 56 VA 183 Series – (183E10) (DISCONTINUED)
Features
- Universal operation – dual primary. 115 or 230 VAC, 50/60 Hz current.
- 14 output voltages to choose from (5 – 36 VAC R.M.S.)
- Six VA size models available from – 2.5 to 56VA.
- Low profile, split bobbin with top shroud design.
- Dual winding secondaries, non-concentrically wound. Can be wired in series, parallel or used separately.
- Low primary to secondary coupling – no electrostatic shield required.
- High insulation – Hipot of 4,000V RMS.
- Class F insulation – 155 degrees C.
- Two hole mounting on 2.5, 5, 10 and 20VA sizes, four hole mounting on 30 and 56VA size (mounting screws not provided).
- P.C. board mount with industry standard pin spacing.
- Listings: cURus, CE and TUV.
NOTE: Products produced after January 1st, 2021 will no longer have a TUV Label, however we do carry plenty of TUV-labeled inventory. Please contact us for more details.
Mechanical & Schematic Data
-
Mounting Dimensions (see tables below)
-
Schematic
-
Complete Connection diagram can be found here – 183 Connection Diagram
Gallery
SKU: 183E10 -
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT1500) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT1500) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT1500 - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT1500P) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT1500P) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT1500P - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT750) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT750) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT750 - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT500) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT500) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT500 - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT160) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT160) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT160 - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT50) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT50) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT50 - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT30) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182KIT30) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182KIT30 - Torodial transformer benefits:
-
Discontinued Products
Toroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182Q240) (DISCONTINUED)
Discontinued ProductsToroid Power Transformers – 15 VA to 1500 VA 1182 Series – (1182Q240) (DISCONTINUED)
Features
- Torodial transformer benefits:
- low profile
- lightweight
- cool running / high efficiency
- due to the core shape – low stray magnetic flux leakage (low EMI)
- Dual 117/234 VAC primary, 50/60 Hz. operation.
- Note: Units are designed to have all windings engaged (either series or parallel connected) or connected as an autotransformer. Connection sheet included with transformer. See Product Resources for Download.
- Supplied with two neoprene rubber insulating pads, one metal centering washer and all mounting hardware (except the 1,500 VA size).
- 1,500 VA size – is supplied with a potted center for extra strength.
- Minimum 8″ long flexible leads
- Manufactured using Class B (130 degree C) materials.
- Hi-Pot test of 4,000VAC RMS between primary & secondary
- UL recognized to UL506 (XPTQ2.Guide) UL file #E207860
- CSA certified to C22.2 #66 – CSA file #209651
- CE compliant to IEC 61558-2-4
- This series replaces our older 182 Toroid Series.
- Note about Inrush Current:
Due to the superior magnetic properties of Toroidal transformers they will be susceptible to high magnetizing current when initially energized, only limited by the low DC resistance of the primary winding. Depending on where you are in the AC cycle when the transformer is energized dictates the chances of overloading the supply circuit. This is why the transformer may sometimes energize without a problem and other times it will blow the fuse or trip the circuit breaker. The duration of this overload is rarely longer than a half of a cycle. Therefore, you should consider using a slow-blow fuse, time delayed circuit breaker or other form of soft start circuitry for the supply line when using these high efficient Toroidal transformers.
Videos
Gallery
SKU: 1182Q240 - Torodial transformer benefits:
-
Discontinued Products
International Grounded Adaptor Plugs 298G Series – (298G7) (DISCONTINUED)
Features
- For use with our 171, 172, 175, 176, 179, 289 & 298 transformers.
- Heavy duty design with plastic shell & double wipe contacts.
- Indoor use only.
- Allows for ground connection between equipment and international power sources.
- With a set of all 4 adaptors, they will accept equipment with plugs from virtually every country except South Africa!
- Adaptors do not affect voltages, they are a mechanical device only to match foreign “pin-outs” of receptacles and/or plugs.
Gallery
SKU: 298G7 -
Discontinued Products
International Grounded Adaptor Plugs 298G Series – (298G6) (DISCONTINUED)
Features
- For use with our 171, 172, 175, 176, 179, 289 & 298 transformers.
- Heavy duty design with plastic shell & double wipe contacts.
- Indoor use only.
- Allows for ground connection between equipment and international power sources.
- With a set of all 4 adaptors, they will accept equipment with plugs from virtually every country except South Africa!
- Adaptors do not affect voltages, they are a mechanical device only to match foreign “pin-outs” of receptacles and/or plugs.
Gallery
SKU: 298G6 -
Discontinued Products
International Grounded Adaptor Plugs 298G Series – (298G4) (DISCONTINUED)
Features
- For use with our 171, 172, 175, 176, 179, 289 & 298 transformers.
- Heavy duty design with plastic shell & double wipe contacts.
- Indoor use only.
- Allows for ground connection between equipment and international power sources.
- With a set of all 4 adaptors, they will accept equipment with plugs from virtually every country except South Africa!
- Adaptors do not affect voltages, they are a mechanical device only to match foreign “pin-outs” of receptacles and/or plugs.
Gallery
SKU: 298G4 -
Discontinued Products
International Grounded Adaptor Plugs 298G Series – (298G3) (DISCONTINUED)
Features
- For use with our 171, 172, 175, 176, 179, 289 & 298 transformers.
- Heavy duty design with plastic shell & double wipe contacts.
- Indoor use only.
- Allows for ground connection between equipment and international power sources.
- With a set of all 4 adaptors, they will accept equipment with plugs from virtually every country except South Africa!
- Adaptors do not affect voltages, they are a mechanical device only to match foreign “pin-outs” of receptacles and/or plugs.
Gallery
SKU: 298G3 -
Discontinued Products
Isolation – Step Down (115VAC to 95VAC) (DISCONTINUED) 179 Series – (179G) (DISCONTINUED)
Discontinued ProductsIsolation – Step Down (115VAC to 95VAC) (DISCONTINUED) 179 Series – (179G) (DISCONTINUED)
Features
- Primary 115VAC, 50/60 Hz., Secondary 95VAC.
- Provides circuit isolation.
- Electrostatic shield between primary & secondary.
- World wide applications, 50 or 60 Hz. operation, step down (115VAC to 95 VAC).
- Designed mainly for Japanese equipment in North America.
- Perfect for operating “Classic” equipment that can not tolerate todays higher line voltages (ie..125 VAC input will produce a stress free 105 VAC output at full load PLUS isolation and shielding).
- Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).
- Input (primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P)
- Output (secondary) connected to two standard – 3 wire grounded receptacles.
- Features include ventilated black steel case, rocker lighted on-off switch & fuse protected output.
- Indoor use only.
- Remember – These units do NOT convert line frequency
-
This series has been discontinued and is available only as long as stock lasts. At this time there is no replacement however parts can be ordered as a custom. Contact Hammond customer service for a quote.
Accessories
SKU: 179G -
Discontinued Products
Isolation – Step Down (115VAC to 95VAC) (DISCONTINUED) 179 Series – (179F) (DISCONTINUED)
Discontinued ProductsIsolation – Step Down (115VAC to 95VAC) (DISCONTINUED) 179 Series – (179F) (DISCONTINUED)
Features
- Primary 115VAC, 50/60 Hz., Secondary 95VAC.
- Provides circuit isolation.
- Electrostatic shield between primary & secondary.
- World wide applications, 50 or 60 Hz. operation, step down (115VAC to 95 VAC).
- Designed mainly for Japanese equipment in North America.
- Perfect for operating “Classic” equipment that can not tolerate todays higher line voltages (ie..125 VAC input will produce a stress free 105 VAC output at full load PLUS isolation and shielding).
- Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding).
- Input (primary) connected to a 5 foot long cord and standard North American plug (NEMA 5-15P)
- Output (secondary) connected to two standard – 3 wire grounded receptacles.
- Features include ventilated black steel case, rocker lighted on-off switch & fuse protected output.
- Indoor use only.
- Remember – These units do NOT convert line frequency
-
This series has been discontinued and is available only as long as stock lasts. At this time there is no replacement however parts can be ordered as a custom. Contact Hammond customer service for a quote.
Accessories
SKU: 179F -
Discontinued Products
Hard Wired 170 Series – (170A) (DISCONTINUED)
Features
- Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required.
- Flexible world wide applications, 50 or 60 Hz. operation, step down (230VAC to 115 VAC) or step up (115VAC to 230VAC).
- Connection by flexible leads, 8″ minimum length.
- Models 170A, 170B, 170C & 170D are CSA certified (209651)
- Remember – These units do NOT convert line frequency
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Capacity Overall Dimensions Weight VA A B C D E Lbs 170 50 2.19 2.63 2.63 1.75 1.56 2 170A 100 2.50 3.00 3.10 2.00 1.90 3 170B 200 3.13 3.50 3.80 2.50 2.20 4.5 170C 300 3.13 4.00 3.80 2.50 2.70 6 170D 500 3.75 4.50 4.60 3.00 3.30 10 170E 750 3.75 5.50 4.60 3.00 4.30 14 170F 1000 3.75 5.50 4.60 3.00 4.30 14.5 170G 1500 4.38 6.60 5.30 3.50 5.10 22 170J 2000 4.38 7.50 5.30 3.50 5.91 23 SKU: 170A -
Discontinued Products
Hard Wired 170 Series – (170) (DISCONTINUED)
Features
- Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required.
- Flexible world wide applications, 50 or 60 Hz. operation, step down (230VAC to 115 VAC) or step up (115VAC to 230VAC).
- Connection by flexible leads, 8″ minimum length.
- Models 170A, 170B, 170C & 170D are CSA certified (209651)
- Remember – These units do NOT convert line frequency
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Capacity Overall Dimensions Weight VA A B C D E Lbs 170 50 2.19 2.63 2.63 1.75 1.56 2 170A 100 2.50 3.00 3.10 2.00 1.90 3 170B 200 3.13 3.50 3.80 2.50 2.20 4.5 170C 300 3.13 4.00 3.80 2.50 2.70 6 170D 500 3.75 4.50 4.60 3.00 3.30 10 170E 750 3.75 5.50 4.60 3.00 4.30 14 170F 1000 3.75 5.50 4.60 3.00 4.30 14.5 170G 1500 4.38 6.60 5.30 3.50 5.10 22 170J 2000 4.38 7.50 5.30 3.50 5.91 23 SKU: 170 -
Discontinued Products
Potential Transformer Instrument PT Series – (PT120PC) (DISCONTINUED)
Features
- Used to measure the voltage of 120 VAC systems with 5 Volt full scale A.C. voltmeters.
- 50/60 Hz. operation.
- Choice of chassis mount or P.C. board pin mount.
- High accuracy windings (1%)
- VA rated for 0.020 VA
SKU: PT120PC -
Discontinued Products
Potential Transformer Instrument PT Series – (PT120CF) (DISCONTINUED)
Features
- Used to measure the voltage of 120 VAC systems with 5 Volt full scale A.C. voltmeters.
- 50/60 Hz. operation.
- Choice of chassis mount or P.C. board pin mount.
- High accuracy windings (1%)
- VA rated for 0.020 VA
SKU: PT120CF -
Discontinued Products
Current Transformer Small Current CT5 Series – (CT5PC) (DISCONTINUED)
Features
- Designed for a 5 amp. primary (maximum 20 Amp), secondary current 5 ma.
- 40 – 1,000 Hz. operation.
- Customer to supply primary winding (1 turn through open top of transformer bobbin).
- Two hole chassis mount or P.C. board pin mount.
- Both units have 5 ma. secondary for use with standard AC ammeters with 5 ma.movements.
- High accuracy windings (1%)
Application Data
To obtain current measurement:
- Pass the wire carrying the current to be measured through the window of the CT transformer (acting as a primary winding).
- Connect the CT secondary to an ammeter with a 5 mA movement.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: CT5PC -
Discontinued Products
Current Transformer Small Current CT5 Series – (CT5CF) (DISCONTINUED)
Features
- Designed for a 5 amp. primary (maximum 20 Amp), secondary current 5 ma.
- 40 – 1,000 Hz. operation.
- Customer to supply primary winding (1 turn through open top of transformer bobbin).
- Two hole chassis mount or P.C. board pin mount.
- Both units have 5 ma. secondary for use with standard AC ammeters with 5 ma.movements.
- High accuracy windings (1%)
Application Data
To obtain current measurement:
- Pass the wire carrying the current to be measured through the window of the CT transformer (acting as a primary winding).
- Connect the CT secondary to an ammeter with a 5 mA movement.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: CT5CF -
Discontinued Products
Tube Guitar Amplifier – Power Transformers 290 Series – (Same) (DISCONTINUED)
Features
-
Designed for drop in replacement of original units.
- Physically, parts were designed to look similar to original factory units (where possible).
- Material used & design specs. were kept as close as possible to the original part to preserve the stock “tone”.
SKU: Same -
-
Discontinued Products
Plate & Filament or Bias – 6 VA to 83 VA 261-262 Series – (262F12) (DISCONTINUED)
Discontinued ProductsPlate & Filament or Bias – 6 VA to 83 VA 261-262 Series – (262F12) (DISCONTINUED)
Features
- Primary 115 VAC, 60 Hz. (Except 261D6 & 261GE6 which are 115/230 50/60 Hz.) and (262EE5 which is 120/240, 50/60 Hz)
- Designed for small power or bias supplies, test equipment, preamps etc.
- Models 261C6, 261D6, 261E6, and 261G6 can also be used with full wave C.T. rectifiers.
- Economical , two hole, channel bracket, chassis mount.
- Minimum 5″ long leads.
- Convenient 6.3 or 12.6 volt filament/auxiliary winding.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part numbers with stars are new sizes or packaging configurations.Units shown: inch. Switch units to: mm
