-
×
Premium Wall Mounts - WMCM - 36'' Height - Black - Solid Doors - Swing Handle with Fan and Cable Bar - Great Lakes Data Racks and Cabinets
1 × $1,874.64
Subtotal: $1,874.64
Showing 4129–4152 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Type 4, 4X Mild Steel and Stainless Steel Desk Units Series 2000 – (2CLD86036) (DISCONTINUED)
Discontinued ProductsType 4, 4X Mild Steel and Stainless Steel Desk Units Series 2000 – (2CLD86036) (DISCONTINUED)
Application
- Generally used in combination with other modular console components (ie. base, pedestal, and/or turret).
- Provides an ideal sloped surface for mounting keyboards, switches, indicator lights, and/or dials.
- Open top permits mounting of a turret (usually for CRT applications) or an optional hinged desk cover (providing a flat, sturdy desk surface).
- Available in either Standard (will support Standard Turret only) or Deep (will support Deep Turret only) format.
- Smooth lines and clean edges provide an attractive, contemporary appearance.
Standards
- UL 508A Type 3R, 4,12 (Stainless Steel, add 4X)
- CSA Type 3R, 4, 12, 13 (Stainless Steel, add 4X)
- EIA RS-310-D
- Complies with
- NEMA Type 3R, 4, 12 (Stainless Steel, add 4X)
- IEC 60529, IP66
Construction
- Formed 14 gauge steel bodies with 14 gauge steel lid.
- Also offered with formed 14 gauge 304 stainless steel bodies with 14 gauge 304 stainless steel lid.
- Smooth, continuously welded seams without knockouts or holes.
- Body stiffeners are provided where required for increased strength and rigidity.
- Offered in 4 widths 24″, 36″, 48″ and 60″.
- Solid sides and back, lid on sloped top area, open on flat top area, bottom is solid under lid area and open under flat top area.
- Deep Desk has a 6.7″ deeper top opening than standard desk allowing for support of Deep Turret – see drawings as Deep Desk has different profile (angled back) from Standard Desk (flat back.)
- Lid profiles provide increased strength.
- Formed lip on enclosure excludes flowing liquids and contaminants.
- Slotted quarter turn oil-tight latches secure the lid, with optional tamper resistant and locking latches available.
- Stainless steel models utilize stainless steel hardware.
- Oil resistant gaskets are permanently secured.
- Features several internal stud locations for mounting Desk Inner Panel.
- A bonding screw is provided on the lid and a grounding stud is provided in the enclosure.
Finish
- Available in RAL 7035 light gray textured powder coating and natural stainless steel with a smooth, brushed finish.
- Desk covers available in same finishes.
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
SKU: 2CLD86036 -
Handholes, OSP - Aerial - Underground
(Part Number – APC486048T22-h) – 48 X 60 X 48 Polymer Concrete Box & Cover – Tier 22 – OSP Handholes/Outside Plant Handholes
Handholes, OSP - Aerial - Underground(Part Number – APC486048T22-h) – 48 X 60 X 48 Polymer Concrete Box & Cover – Tier 22 – OSP Handholes/Outside Plant Handholes
Polymer concrete boxes are a trusted solution for underground enclosures across telecommunications, electrical, water, and utility infrastructure. Engineered from a blend of polymer resins and mineral aggregates, these enclosures deliver exceptional strength, chemical resistance, and long-term durability—outperforming traditional concrete in many demanding environments. Whether used as splice boxes, handholes, or junction enclosures, polymer concrete vaults offer a lightweight yet robust alternative that simplifies installation while providing superior performance.
SKU: APC486048T22-h -
OSP - Aerial - Underground, Vaults
(Part Number – APC486048T22) – 48 X 60 X 48 Polymer Concrete Box & Cover – Tier 22 – OSP Vaults/Outside Plant Vaults
OSP - Aerial - Underground, Vaults(Part Number – APC486048T22) – 48 X 60 X 48 Polymer Concrete Box & Cover – Tier 22 – OSP Vaults/Outside Plant Vaults
Polymer concrete boxes are a trusted solution for underground enclosures across telecommunications, electrical, water, and utility infrastructure. Engineered from a blend of polymer resins and mineral aggregates, these enclosures deliver exceptional strength, chemical resistance, and long-term durability—outperforming traditional concrete in many demanding environments. Whether used as splice boxes, handholes, or junction enclosures, polymer concrete vaults offer a lightweight yet robust alternative that simplifies installation while providing superior performance.
Instructions for Moving Vaults
BABA Compliance
Shipping is AdditionalSKU: APC486048T22 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Test & Measurement Rack Cabinet C2RR Series – (C2RR196331LG1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsTest & Measurement Rack Cabinet C2RR Series – (C2RR196331LG1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
- One (1) locking front window door
- One (1) locking rear louvred door
- One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
SKU: C2RR196331LG1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Test & Measurement Rack Cabinet C2RR Series – (C2RR196331BK1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsTest & Measurement Rack Cabinet C2RR Series – (C2RR196331BK1)
Features
- Available in 24U, 36U, 40U and 45U mounting heights.
- Available in 23” overall width (19″ mounting width).
- Available in 23.62″ and 31.5″ overall depths.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Flush-mounted doors with quarter-turn lock.
- Solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Drilled and 10-32 tapped flange 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- All configurations include:
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs of adjustable depth EIA compliant 10-32 tapped flange mounting rails.
- Starter pack of SCREW1032-25 screws.
- Two (2) removable side panels (with 1/4 turn latches).
- C2RR Series Specific Components Include:
- One (1) solid locking door (Can be used as either front or rear door)
- One (1) solid top panel
- C2RR “D” Series Specific Components include (Replaced by C4RR):
- One (1) locking front window door
- One (1) locking rear louvred door
- One (1) vented top panel with four (4) 3.5″ (89 mm) diameter cable access holes with covers
Are you looking for the CAK for wider legacy-wide C2 cabinets? Click here.
SKU: C2RR196331BK1 -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure w/ Window Eclipse Series – (EN4SD242410WSS) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure w/ Window Eclipse Series – (EN4SD242410WSS) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment in wallmount applications where viewing of component operation is necessary while maintaining protection ratings.
- Impressive styling features like hidden hinges and attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- Complies with
- NEMA Type 3R, 4, 4X, 12 and 13
- IEC 60529, IP66
Construction
- Formed 14 (24×24″ and larger) or 16 (24×20″ and smaller) gauge stainless steel.
- Full view UV resistant polycarbonate window allows maximum viewing area of inner panel.
- Continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Hinges are constructed from stainless steel.
- Stainless steel hinge pins and quarter turns.
Finish
- Cover and enclosure are natural stainless steel with a smooth brushed finish.
Videos
Accessories
Additional Inner Panels
Swing Panel
Swing Frame
Eclipse Rack Panel
Eclipse DIN Rail Mounting Kit
Eclipse DIN Rails
Door Stop Kit
Mounting Foot Kit
Rear Hole Plugs
Drip Shield Kit
Quarter Turn Inserts and Keys
Quarter Turn Assemblies
Padlock Adaptor
Handles
Replacement Hinge Pins
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Part No. H W D Part No. H W EN4SD12126WSS 12.00 12.00 6.00 EP1212 10.20 10.20 EN4SD16126WSS 16.00 12.00 6.00 EP1612 14.20 10.20 EN4SD20166WSS 20.00 16.00 6.00 EP2016 18.20 14.20 EN4SD20206WSS 20.00 20.00 6.00 EP2020 18.20 18.20 EN4SD20168WSS 20.00 16.00 8.00 EP2016 18.20 14.20 EN4SD20208WSS 20.00 20.00 8.00 EP2020 18.20 18.20 EN4SD24208WSS 24.00 20.00 8.00 EP2420 22.20 18.20 EN4SD24248WSS 24.00 24.00 8.00 EP2424 22.20 22.20 EN4SD30248WSS 30.00 24.00 8.00 EP3024 28.20 22.20 EN4SD161210WSS 16.00 12.00 10.00 EP1612 14.20 10.20 EN4SD201610WSS 20.00 16.00 10.00 EP2016 18.20 14.20 EN4SD202010WSS 20.00 20.00 10.00 EP2020 18.20 18.20 EN4SD242010WSS 24.00 20.00 10.00 EP2420 22.20 18.20 EN4SD242410WSS 24.00 24.00 10.00 EP2424 22.20 22.20 EN4SD302410WSS 30.00 24.00 10.00 EP3024 28.20 22.20 SKU: EN4SD242410WSS -
Test Equipment, Tools - Test - Safety Equipment
(Part – F6121R) – Wilcom Optical Fiber Identifier Ribbon – Test Equipment – Fiber Optic Test Equipment – Fiber Instrument Sales
Test Equipment, Tools - Test - Safety Equipment(Part – F6121R) – Wilcom Optical Fiber Identifier Ribbon – Test Equipment – Fiber Optic Test Equipment – Fiber Instrument Sales
American Tech Supply offers a comprehensive selection of fiber optic test equipment designed to ensure accuracy, reliability, and performance across fiber optic networks. Our inventory includes optical power meters, light sources, OTDRs, fiber identifiers, inspection scopes, and advanced testing solutions from leading manufacturers. These tools allow technicians, contractors, and network engineers to quickly verify signal strength, locate faults, inspect connectors, and maintain optimal network performance.
Whether you are installing new fiber infrastructure, maintaining existing networks, or troubleshooting connectivity issues, American Tech Supply provides the professional-grade fiber optic test equipment needed for data centers, telecommunications, enterprise networks, and outside plant (OSP) applications. With trusted products, competitive pricing, and expert support, American Tech Supply is a reliable source for high-quality fiber optic testing tools.
SKU: F6121R -
Armored Cable, MTP/MPO Kit
(Part Number: MATS12-OM1-500-PL) 12 Strand 500FT OM1 nanoFIBER Stainless Steel Armored Fiber Optic Cable Plenum – Armored Fiber Cable – Armored Fiber Optic Cables – Custom Armored Fiber Cables – Armored Fiber Patch Cords – Armored Fiber Patch Cables – Armored Fiber Optic Assemblies – TAA Armor Fiber Optic Cable – TAA Armored Fiber Optic Cable
Armored Cable, MTP/MPO Kit(Part Number: MATS12-OM1-500-PL) 12 Strand 500FT OM1 nanoFIBER Stainless Steel Armored Fiber Optic Cable Plenum – Armored Fiber Cable – Armored Fiber Optic Cables – Custom Armored Fiber Cables – Armored Fiber Patch Cords – Armored Fiber Patch Cables – Armored Fiber Optic Assemblies – TAA Armor Fiber Optic Cable – TAA Armored Fiber Optic Cable
MTP/MPO Kit Includes 2 Cassettes and one MTP-MTP cable
SKU: MATS12-OM1-500-PL -
Networking
(Part – 0651200SC10) – Signamax Media Converter SC Multimode 10/100 Base T/TX to 100 Base FX 12-Channel – High Performance Fiber Optic Component for Reliable Network Connectivity – Fiber Instrument Sales
Networking(Part – 0651200SC10) – Signamax Media Converter SC Multimode 10/100 Base T/TX to 100 Base FX 12-Channel – High Performance Fiber Optic Component for Reliable Network Connectivity – Fiber Instrument Sales
High-quality Signamax Media Converter SC Multimode 10/100 Base T/TX to 100 Base FX 12-Channel designed for reliable fiber optic performance, ensuring consistent signal control and durability in demanding network environments.
SKU: 0651200SC10 -
Discontinued Products
Type 4, 4X Mild Steel and Stainless Steel Turret Units Series 2000 – (2CLT202443) (DISCONTINUED)
Discontinued ProductsType 4, 4X Mild Steel and Stainless Steel Turret Units Series 2000 – (2CLT202443) (DISCONTINUED)
Application
- Ideal as a housing for video screens.
- Flexible design provides panel mount or rack mount capabilities for a variety of applications.
- Generally used in combination with other modular console components (ie. base, pedestal, and/or desk).
- Available in either Standard (supported by Base, Pedestal, or Standard Desk) or Deep (supported by Deep Desk only) format.
- Smooth lines and clean edges provide an attractive, contemporary appearance.
Standards
- UL 508A Type 3R, 4,12 (Stainless Steel, add 4X)
- CSA Type 3R, 4, 12, 13 (Stainless Steel, add 4X)
- EIA RS-310-E
- Complies with
- NEMA Type 3R, 4, 12 (Stainless Steel, add 4X)
- IEC 60529, IP66
Construction
- Formed 14 gauge steel bodies with 14 gauge steel doors.
Also offered with formed 14 gauge 304 stainless steel bodies with 14 gauge 304 stainless steel doors. - Smooth, continuously welded seams without knockouts or holes.
- Body stiffeners are provided where required for increased strength and rigidity.
- Offered in 4 widths 24″, 36″, 48″ and 60″.
- Features solid sides and top, solid door on front (opens down) and back (opens up), and open bottom.
- Front door features sliding rod mechanism, which allows a 102º opening when in the lowered position.
- Rear door features manual, 3 position adjustable door stop which provides convenient support while door in open position.
- Formed lip on enclosure excludes flowing liquids and contaminants.
- Slotted quarter turn oil-tight latches secure the door, with optional tamper resistant and locking latches available.
- Stainless steel models utilize stainless steel hardware.
- Oil resistant gaskets are permanently secured.
- Features several internal stud locations for mounting of various accessories.
- A bonding screw is provided on the door and a grounding stud is provided in the enclosure.
Finish
- Available in RAL 7035 light gray textured powder coating and natural stainless steel with a smooth, brushed finish.
- 24″ Front Window Door available in same finishes.
Accessories
- S2000 Internal Components
- S2000 Rack Components
- S2000 External Components
- Quarter Turn Assemblies
- Quarter Turn Inserts and Keys
- Padlock Adaptor
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Standard Depth Turret
Units shown: inch. Switch units to: mm
RAL 7035 Light Gray Stainless Steel Enclosure Part No. Part No. H W D1 D2 2CLT202436 2CST202436 20.00 24.00 12.38 16.62 2CLT203636 2CST203636 20.00 36.00 12.38 16.62 2CLT204836 2CST204836 20.00 48.00 12.38 16.62 2CLT206036 2CST206036 20.00 60.00 12.38 16.62 Extra Deep Turret
Units shown: inch. Switch units to: mm
RAL 7035 Light Gray Stainless Steel Enclosure Part No. Part No. H W D1 D2 2CLT202443 2CST202443 20.00 24.00 16.62 23.31 2CLT203643 2CST203643 20.00 36.00 16.62 23.31 2CLT204843 2CST204843 20.00 48.00 16.62 23.31 2CLT206043 2CST206043 20.00 60.00 16.62 23.31 SKU: 2CLT202443 -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure HWSSHK Series – (HW363010SSHK) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure HWSSHK Series – (HW363010SSHK) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Provides high level of protection where equipment is hosed down or otherwise be exposed to wet conditions where corrosion is a serious problem.
- Ideal for processing plants, utility, outdoor municipal or petro chemical locations where easy yet secure access is required.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge 304 or 316 stainless steel.
- Continuously welded seams ground smooth.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- 316 Stainless pad lockable handle with 3 point roller latching system secures door.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with smooth brushed finish.
Videos
Accessories
Additional Inner Panels
Perforated Inner Panels
Type 12/4, 4X Handle Kits
Swing Panel Kit- Door Stop Kit
- Drip Shield Kit
Floor Stand Kit
Window Kits- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
