Exponential Power
Showing 97–120 of 132 resultsSorted by price: high to low
-
Batteries, Battery Handling Equipment, Mobile Battery Changers, Motive Power/Forklifts
BHS BTC: Battery Transfer Carriage – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Handling Equipment, Mobile Battery Changers, Motive Power/ForkliftsBHS BTC: Battery Transfer Carriage – Forklift and Industrial Batteries – Exponential Power
Designed with a fully-powered hydraulic operated extractor arm, the Battery Transfer Carriage is powered by a 12V DC hydraulic power unit. Each function is controlled by a manual control valve with overload relief for additional safety. Lift range is from 5.5 inches to 21.5 inches.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: BHS-BTC-ExP -
Batteries, Battery Handling Equipment, Manual Battery Changers, Motive Power/Forklifts
Sackett TC-PN: Manual Battery Transfer Cart – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Handling Equipment, Manual Battery Changers, Motive Power/ForkliftsSackett TC-PN: Manual Battery Transfer Cart – Forklift and Industrial Batteries – Exponential Power
Sackett’s Manual Transfer Battery Carts are designed to be used with roller equipped stands that eliminate overhead lifting. Batteries can easily be transferred from one unit to another without the need for extra handling.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: S-TC-PN-ExP -
Batteries, Battery Accessories, Stationary/Reserve Power
Stationary Battery Bi-Directional Recombination Vent Caps – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Stationary/Reserve PowerStationary Battery Bi-Directional Recombination Vent Caps – Forklift and Industrial Batteries – Exponential Power
The operation of lead acid batteries results in the electrolysis of water. Electrolysis reduces the amount of water in the electrolyte, which in turn requires the battery to be watered more frequently, increasing maintenance requirements. Hydrogen and oxygen are also naturally created as part of this process and these gases can accumulate and become explosive.
The Exponential Power recombination vent caps help to prevent the gases generated through electrolysis from escaping. Inside the cap is a catalyst (rare earth element) which reacts with hydrogen and oxygen and converts the gases into water vapor. This is an exothermic process and heat is generated during this recombination process.
As the battery stops gassing and the cap cools, water vapor condenses on the walls of the plug and will flow back into the battery, thus 98% of the hydrogen/oxygen gas mixture generated during charging will be recombined and converted back to water. This process effectively eliminates the flow of gases from the battery into the atmosphere.
Exponential Power recombination vent caps significantly improve safety, preventing (under normal conditions) the flow of gas into the immediate surroundings and eliminating the risk of ignition, as well as reducing the need for water refilling.
- Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SB-BD-ExP -
Batteries, Battery Accessories, Charging Technologies, Management/Monitoring Systems, Motive Power/Forklifts
Power Logger BLuE™ – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Charging Technologies, Management/Monitoring Systems, Motive Power/ForkliftsPower Logger BLuE™ – Forklift and Industrial Batteries – Exponential Power
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: PLBLE-ExP -
Batteries, Battery Accessories, Charging Technologies, Management/Monitoring Systems, Motive Power/Forklifts
TOBi P.I. BLuE™ Data Recorder – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Charging Technologies, Management/Monitoring Systems, Motive Power/ForkliftsTOBi P.I. BLuE™ Data Recorder – Forklift and Industrial Batteries – Exponential Power
Meet TOBi P.I. BLuE™, measuring just 3”L x 1.5”W x 0.41”H. This compact device transforms battery maintenance. With Bluetooth compatibility for iOS and Android, a waterproof enclosure, and precise event records, it simplifies care. No welding or strap removal needed during its quick 15-minute installation. Experience hassle-free battery management with TOBi P.I. BLuE™.
.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: TOBI-ExP -
Batteries, Battery Chargers, Industrial/Utility, Stationary/Reserve Power
SENS EnerGenius IQ: Stationary Power Battery Charger – Stationary and Reserve Power Batteries – Exponential Power
Batteries, Battery Chargers, Industrial/Utility, Stationary/Reserve PowerSENS EnerGenius IQ: Stationary Power Battery Charger – Stationary and Reserve Power Batteries – Exponential Power
IQ2 is an SCR-type industrial/utility charger that powers DC equipment, charges your battery, automatically tests battery performance, and communicates DC system status. IQ2 is an update of SENS’ popular EnerGenius IQ charger.
IQ2 is fit, form and function compatible with the original EnerGenius IQ. Employing the same power train as the original EnerGenius IQ, IQ2 adds the advanced DSP-based control and firmware proven in thousands of SENS’ MicroGenius and EnerGenius DC platforms.
First generation EnerGenius IQ chargers can be easily upgraded to full IQ2 function by swapping circuit boards and the front door mimic panel/LED overlay.
Demonstrating SENS’ commitment to quality and to surviving harsh industrial and utility environments, IQ2 is equipped with SENS’ unique corrosion-proof all stainless-steel housing and backed by industry-best five-year warranty.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SENS-IQ-ExP -
Batteries, Battery Test Equipment, Load Banks, Motive Power/Forklifts
EXP-300CT: Battery Discharge Cycler – Battery Testing Solutions – Exponential Power
Batteries, Battery Test Equipment, Load Banks, Motive Power/ForkliftsEXP-300CT: Battery Discharge Cycler – Battery Testing Solutions – Exponential Power
EXP-300CT is a best-in-class test platform for traction battery cycling. Used for periodic battery testing and the regeneration. The EXP-300CT is an exceptional addition to your maintenance routine.
The wide voltage range of 12 V – 96 V covers almost all types of traction batteries (forklifts, AGV, automobile, golf cart, train, wheelchair etc.)
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: EXP-300CT-ExP -
Batteries, Batteries, Maintenance-Free Batteries, Motive Power/Forklifts
Maintenance-Free Batteries – Forklift and Industrial Batteries – Exponential Power
Batteries, Batteries, Maintenance-Free Batteries, Motive Power/ForkliftsMaintenance-Free Batteries – Forklift and Industrial Batteries – Exponential Power
Exponential Power offers a low maintenance system which utilizes a specialized battery and charger design.
In light to moderate duty cycles, we offer a completely maintenance-free battery system when used with an approved matching charger. This battery does not require water during its life. Available in AGM (Absorbed Glass Mat) and Gel designs.
For light duty pallet truck applications, we offer an economical, maintenance-free battery pack system with an on board battery charger which can be connected to any 100 Volt outlet.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: MFB-ExP -
Batteries, Battery Maintenance, Battery Water Guns, Motive Power/Forklifts
Battery Watering Guns – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Maintenance, Battery Water Guns, Motive Power/ForkliftsBattery Watering Guns – Forklift and Industrial Batteries – Exponential Power
GUN-X: Battery Watering Gun
The GUN-X is the next generation in battery watering gun technology making it an essential maintenance tool for any battery room, forklift battery and industrial battery. This improved technology speeds up battery watering, increases filling accuracy and improves operator safety. Compared to hand watering and with a flow rate of 1.7 gallons per minute, the GUN-X can reduce labor costs up to $150 a year for each 18-cell battery.
GUN-RR: Battery Watering Gun
The GUN-RR (The Railroad Battery Watering Gun) is specifically designed to serve as a solution for watering diesel starter batteries. It incorporates a unique ergonomic design that allows an operator to access every cell in a battery. Its efficiency can permit an operator to fully water a battery in 10 minutes.
GUN-S: Stationary Battery Watering Gun
The GUN-S has been specially designed for watering transparent type stationary batteries. This gun operates outside the battery cell and does not have an automatic shutoff. When the correct water level is reached, simply release the handle to shut off the water flow.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: BWG-ExP -
Batteries, Battery Accessories, Stationary/Reserve Power
HindlePower Best Battery Selector (BBS) – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Stationary/Reserve PowerHindlePower Best Battery Selector (BBS) – Forklift and Industrial Batteries – Exponential Power
True dc system protection and redundancy
Using a Best Battery Selector (BBS) is an effective and low cost method of providng true battery system protection and reduncy. When two or more batteries are paralleled, electrical isolation is required so that system redundancy is not compromised.
The BBS is a power diode arrangement that uses multiple parallel battery circuits while ensuring that no single battery will ever be a burden on the system.Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: HPBBS-ExP -
Batteries, Battery Accessories, Stationary/Reserve Power
HindlePower DC Control Panel – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Stationary/Reserve PowerHindlePower DC Control Panel – Forklift and Industrial Batteries – Exponential Power
The operation of lead acid batteries results in the electrolysis of water. Electrolysis reduces the amount of water in the electrolyte, which in turn requires the battery to be watered more frequently, increasing maintenance requirements. Hydrogen and oxygen are also naturally created as part of this process and these gases can accumulate and become explosive.
The Exponential Power recombination vent caps help to prevent the gases generated through electrolysis from escaping. Inside the cap is a catalyst (rare earth element) which reacts with hydrogen and oxygen and converts the gases into water vapor. This is an exothermic process and heat is generated during this recombination process.
As the battery stops gassing and the cap cools, water vapor condenses on the walls of the plug and will flow back into the battery, thus 98% of the hydrogen/oxygen gas mixture generated during charging will be recombined and converted back to water. This process effectively eliminates the flow of gases from the battery into the atmosphere.
Exponential Power recombination vent caps significantly improve safety, preventing (under normal conditions) the flow of gas into the immediate surroundings and eliminating the risk of ignition, as well as reducing the need for water refilling.
- Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: HPDCP-ExP -
Batteries, Battery Accessories, Stationary/Reserve Power
HindlePower Trailer Connection Panel – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Stationary/Reserve PowerHindlePower Trailer Connection Panel – Forklift and Industrial Batteries – Exponential Power
The quick and easy way to connect your DC trailer.
The Trailer Connection Panel offers a quick, safe& secure connection between your dc trailer and your substation. This standard design creates uniformity throughout your grid.
SAMPLE SCHEMATIC WITH OPTIONAL BREAKERS
DC Trailer Substation Junction Interface

Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: HPTCP-ExP -
Batteries, Battery Accessories, Motive Power/Forklifts, Parts, Vent Caps & Plugs
Flow-Rite Flip Top Watering Cap – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Motive Power/Forklifts, Parts, Vent Caps & PlugsFlow-Rite Flip Top Watering Cap – Forklift and Industrial Batteries – Exponential Power
Water Wise Flip-Top Watering Caps limit the nozzle depth of automatic watering guns to achieve accurate electrolyte levels without the use of adjustable O-rings.
Take the guess-work out of refilling battery cells! Simply leave the Flip-Top Watering Cap in place. Your batteries will always have the proper electrolyte levels ensuring longer life. You get peace of mind knowing that every battery cell is watered properly and safely.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: FRFTWC-ExP -
Ametek SCR Industrial Battery Chargers, Ametek/Prestolite Power Chargers, Batteries, Battery Chargers, Motive Power/Forklifts
Ametek High Frequency: PAC 800 – Forklift and Industrial Batteries – Exponential Power
Ametek SCR Industrial Battery Chargers, Ametek/Prestolite Power Chargers, Batteries, Battery Chargers, Motive Power/ForkliftsAmetek High Frequency: PAC 800 – Forklift and Industrial Batteries – Exponential Power
The PAC 800 is designed to charge batteries used in light industrial single-shift applications that have 10 –20 hours available for charging. Typical applications include walkie trucks, floor care equipment, aerial lifts, and other equipment using lead-acid deep cycle batteries.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: AHF-PAC800-ExP -
Batteries, Battery Accessories, Electrolyte Monitoring, Motive Power/Forklifts
Electrolyte Level Monitor – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Accessories, Electrolyte Monitoring, Motive Power/ForkliftsElectrolyte Level Monitor – Forklift and Industrial Batteries – Exponential Power
Blinky Basic™, SmartBlinky™, SmartBlinky Remote™, and SmartBlinky Pro™
Philadelphia Scientific’s family of battery watering monitors allow watering on a labor-saving “as needed” basis instead of a hit-or-miss schedule. Watering too frequently can cause electrolyte boil overs, which reduce battery capacity by three percent for each occurrence. Lack of water in batteries creates a low electrolyte level, eventually causing permanent damage to the cells. The Blinky™ family of monitors will help ensure your electrolyte levels are never too low or too high. They feature the industry’s brightest LED, so they are much more visible. The new Smart Blinky Pro™ introduces an audible dimension of electrolyte level notification. The installation forgiveness zone reduces the potential for damaging monitors during installation and provides a far wider voltage operating zone.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: ELM-ExP -
Batteries, Battery Maintenance, Motive Power/Forklifts, Water Deionizer
Philadelphia Scientific Water Deionizer – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Maintenance, Motive Power/Forklifts, Water DeionizerPhiladelphia Scientific Water Deionizer – Forklift and Industrial Batteries – Exponential Power
This professional quality deionizer system is not just a filter, which only removes particles, but a real ion-exchange medium that electrostatically removes dissolved impurities. Purity is comparable with distilled water and ideal for batteries.
Lead-Acid Battery Water Deionizer System
Maximize battery performance with pure water from the tap.
Our water deionizer reduces the high cost of buying bottled water and is more convenient. Each disposable cartridge purifies about 600 gallons of water (2400 liters). Why let impurities in your water reduce the life of your battery, when this system is so easy to use and cost effective?
How Does it Work?
Inside the deionizer, tap water is passed through a cartridge containing beds of cationic and anionic resins which electrostatically remove impurities. The result is very pure water. When the cartridge is exhausted, simply replace it with a fresh one. Cartridges are available for a fraction of the cost of distilled water, enabling you to produce your own pure water for less money than it would cost to buy it.
Why Use a Deionizer for Battery Water?
Metallic impurities in water can poison the battery, affect cell voltages, and increase self-discharge, all of which can result in shortened battery run time and reduced battery life. Calcium and magnesium compounds found in hard water may cause mossing and dendrite growth through the separators. Note that these impurities are dissolved in the water and cannot be removed by conventional filters. Using deionized water is a simple and effective way to maximize battery life.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: PSWD-ExP -
Batteries, Battery Handling Equipment, Manual Battery Changers, Motive Power/Forklifts
BHS WTC: Walkie Transfer Carriage – Forklift and Industrial Batteries – Exponential Power
Batteries, Battery Handling Equipment, Manual Battery Changers, Motive Power/ForkliftsBHS WTC: Walkie Transfer Carriage – Forklift and Industrial Batteries – Exponential Power
The BHS Walkie Transfer Carriage is a dependable, versatile, non-powered changer designed for small fleets. The WTC is offered in three affordable models and is an excellent tool for forklift maintenance and repair.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: BHS-WTC-ExP -
Batteries, Batteries, Nickel Cadmium/Ni-Cad, Stationary/Reserve Power, Telecommunications
Saft Compact Ni-Cd Batteries – Stationary and Reserve Power Batteries – Exponential Power
Batteries, Batteries, Nickel Cadmium/Ni-Cad, Stationary/Reserve Power, TelecommunicationsSaft Compact Ni-Cd Batteries – Stationary and Reserve Power Batteries – Exponential Power
Saft’s new Compact range of maintenance-free nickel batteries for industrial backup can be fitted in the same footprint and share charging protocols as lead-acid batteries. As a result, operators can upgrade to nickel technology in their existing cabinets and immediately improve reliability and Total Cost of Ownership (TCO).
The Compact nickel battery systems are directly compatible with valve-regulated lead-acid (VRLA) battery chargers. Normally, nickel batteries require a boost charge to reach a fully charged state. However, the new Compact Ni-Cd range requires only a single step charging voltage of 1.39 Volts per cell. This makes it possible to use them as a direct drop-in replacement for existing VRLA batteries. This development builds on Saft’s successful introduction of similar innovative features in its Uptimax nickel battery solutions.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: NI-CD-ExP -
Batteries, Batteries, Industrial/Utility, Stationary/Reserve Power
Saft SPH Engine Starting Ni-Cd Batteries – Stationary and Reserve Power Batteries – Exponential Power
Batteries, Batteries, Industrial/Utility, Stationary/Reserve PowerSaft SPH Engine Starting Ni-Cd Batteries – Stationary and Reserve Power Batteries – Exponential Power
Cranking up an emergency diesel generator engine or switching on heaters, pumps or other equipment demands reliable batteries that operate at any temperature.
SPH HIGH POWER nickel battery solutions recover their voltage instantaneously, making them the ideal choice for starting applications off-shore, on-shore, on industrial production lines, and in critical buildings such as hospitals.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SPH-NI-CD-ExP -
Batteries, Batteries, Industrial/Utility, Nickel Cadmium/Ni-Cad, Stationary/Reserve Power
Saft Uptimax Maintenance-Free Ni-Cd Batteries – Stationary and Reserve Power Batteries – Exponential Power
Batteries, Batteries, Industrial/Utility, Nickel Cadmium/Ni-Cad, Stationary/Reserve PowerSaft Uptimax Maintenance-Free Ni-Cd Batteries – Stationary and Reserve Power Batteries – Exponential Power
The latest generation of Uptimax nickel battery technology is the perfect fit to replace lead-acid batteries thanks to its 1.39 V/cell single level charge. When a fast recharge is needed, 95% State-Of-Charge (SOC) in 8h can be reached at 1.45 V/cell for minimal downtime and optimal availability. These improvements come in addition to the key existing benefits of the Uptimax Ni-Cd battery range.
Uptimax Ni-Cd battery combines maintenance-free* operation with total reliability for industrial backup power applications, high electrical performance, long operational life of over 20 years and a low TCO (total cost of ownership).
Uptimax pocket plate nickel battery is designed to form the heart of Uninterruptible Power Supply and backup power systems that operate in the event of a loss of the main power supply to facilitate the safe shutdown of processes, safeguard computer data and provide bridge to standby power. Typical power backup applications include UPS, substation switchgears, process control systems, emergency lighting, fire alarms and security systems.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: UM-NI-CD-ExP -
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve Power
SBS-1110S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve PowerSBS-1110S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
The only way to know if your stationary batteries will perform to specification is to test them regularly.
NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six (6) years and valve regulated lead acid (VRLA) batteries every three (3) years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five (5 )years and VRLA batteries every 12–18 months.
The SBS-1110S constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (Ni-Cad) and IEEE1188 (VRLA) load tests.
These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.
These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SBS-1110S-ExP -
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve Power
SBS-1230S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve PowerSBS-1230S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
The only way to know if your stationary batteries will perform to specification is to test them regularly.
NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (Ni-Cd) systems be discharge tested every six years and valve regulated lead acid (VRLA) batteries every three years. IEEE recommends load testing stationary flooded/vented lead acid and Ni-Cd stationary batteries every five years and VRLA batteries every 12–18 months.
The SBS-1230S constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (Ni-Cd) and IEEE1188 (VRLA) load tests.
These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.
These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SBS-1230S-ExP -
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve Power
SBS-2206S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve PowerSBS-2206S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
The only way to know if your stationary batteries will perform to specification is to test them regularly.
NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six years and valve regulated lead acid (VRLA) batteries every three years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five years and VRLA batteries every 12–18 months.
The SBS-2206S constant current load banks are an easy and affordable way to perform accurate IEEE450 (Vented Lead-Acid), IEEE1106 (NiCd) and IEEE1188 (VRLA) load tests.
These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.
These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SBS-2206S-ExP -
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve Power
SBS-2415S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
Batteries, Battery Test Equipment, Load Banks, Stationary/Reserve PowerSBS-2415S: Battery Capacity Tester – Battery Testing Solutions – Exponential Power
The only way to know if your stationary batteries will perform to specification is to test them regularly.
NERC standard PRC-005-2 requires that vented lead acid and nickel cadmium (NiCd) systems be discharge tested every six years and valve regulated lead acid (VRLA) batteries every three years. IEEE recommends load testing stationary flooded/vented lead acid and NiCd stationary batteries every five years and VRLA batteries every 12–18 months.
The SBS-2415S constant current load banks are an affordable way to perform easy and accurate IEEE450 (vented lead acid), IEEE1106 (NiCd) and IEEE1188 (VRLA) load tests.
These units are quick and easy to set up. They display the voltage, current and Ah removed from the string during the test. Since this is a constant current load bank, the user also does not have to adjust the current during the test.
These load banks come standard with multiple adjustable stop points and built-in protection to ensure that the batteries are never damaged due to over-discharge.
Built-in memory continuously records discharge data including: overall system voltage, current and individual cell voltages (when modules are installed).
Pricing and lead times may vary. Please request a quote, call us at (866) 650-3282, or send an Email to team@americanteledata.com for more information.
SKU: SBS-2415S-ExP







































