Couplers, InnerDuct, InnerDuct Accessories
Split-Lock + Coupler 2.00″ SDR – DuraLine
*Please note there may be minimums requirements for all types of innerduct
The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.
Call for Price
Compare
The Split-Lock + is a split coupler produced from a glass fiber reinforced nylon resin. The coupler is heat and UV stabilized, and offers excellent impact strength. It’s reusable and is ideal for temporarily coupling conduits, particularly at slack-loop locations, and also for air-assisted jetting applications. The coupler is easily assembled using a 7/16” nut driver.
FEATURES
- No special tools required
- Reusable – can install with cable inside
- Heat- and UV-stabilized
- Fungus- and chemical-resistant
- Air-tight and water-tight
- No I.D. reduction
- Not recommended for plow chute
- Meets UL 514B pullout requirements
- ETL listed to UL STD 514B and CSA STD C22.2 18.3
- Made in the USA
| Weight | 6 lbs |
|---|
Related products
-
Couplers, InnerDuct, InnerDuct Accessories
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
EPEC 13.5 1/2” NEMA TC7 Standard HDPE – Duraline NEMA TC7 HDPE InnerDuct – Duraline EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 NEMA TC7 HDPE InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPEEPEC 13.5 1/2” NEMA TC7 Standard HDPE – Duraline NEMA TC7 HDPE InnerDuct – Duraline EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 NEMA TC7 HDPE InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1/2-EPEC-13.5 -
Couplers, InnerDuct, InnerDuct Accessories
2.00″ Redi-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
The latest in Dura-Line’s coupler collection, the Redi-Lock® is ideal for joining lengths of HDPE Sticks but can also be used with continuous length, reeled products.SKU: 20005477 -
Couplers, InnerDuct, InnerDuct Accessories
4.00″ Shur-Lock II Coupler SDR 4.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000245
