(Part No. – C725-855BU) CAT 6 CMR Patch Cable, UTP Solid, Non-booted, Blue, 55ft – Cat6 CMR Riser Patch Cables – High-Performance – Shaxon

Ensure reliable data transfer and efficient cable management with Shaxon’s premium CAT 6 CMR Solid Patch Cables.

** Exact shade of cable color may vary per order**

Key Features:

• Solid Wire Construction: 24 awg solid wire construction for applicable installation environments
• Plenum Jacket: Riser rated (CMR) Jacket for installation environments unsuitable for cm cables.
• Standard RJ45 Plugs: Rugged Polycarbonate RJ45 Plugs with no boot for enhanced flush mounting ability.

Benefits:

• Enhanced Durability: Rugged made in California construction
• Reliable Performance: Standard RJ45 plugs guarantee optimal signal integrity for smooth data transfer.
• Space-Saving Design: Unbooted cables allow for efficient cable management in high-density environments.

Ideal for:

• Installation environment requiring CMR Riser rated cable

Choose Shaxon’s CAT6 Patch Cables for a reliable, flexible, and space-saving network solution. Upgrade your network performance and experience the Shaxon difference.

CATEGORY 6

Category 6 cable is used in structured cabling for computer networks. The cable provides performance of up to 250MHz and is suitable for 10BASE-T, 100BASE-T, and 1000BASE-T for distances of up to 100 meters and 10GbE for distances up to 55 meters

CABLING STANDARDS

Network cabling standards are used internationally and are published by ISO/IEC, CENELEC and the Telecommunications Industry Association (TIA). Since 1995, solid-conductor UTP cables for backbone cabling is required to be no thicker than 22 AWG and no thinner than 24 AWG, or 26 AWG for shorter-distance cabling.

POWER OVER ETHERNET (POE)

POE describes any of sever standard or ad-hoc system which pass electric power along with data on twisted pair Ethernet cabling. This allows a single cable to provide both data connection and electric power to devices such as wireless network components, IP cameras, and VoIP phones.

The IEEE standards for PoE require category 5 cable or better for high power levels but will allow using category 3 cable if less power is required.