(Part Number: DZK 700/710) – Drip Zone Kit with Reducing Bushing – 3/4 in. MPT “Y” Filter – 30 PSI Pressure Regulator – and 3/4 in. MPT Adapter X Smart Loc™ Multidiameter Fitting – 1.0 – 8 GPM – Drip Zone Kit – Drip Zone Kit for Flowerpot Irrigation – All-in-One Water Control – Made in America – NDS

Key Features

• Designed to work with most manufacturers’ valves
• Y filter with 150-mesh polyester filter screen blocks particles in the water to prevent clogging emitters; screen is removable for cleaning and maintenance
• Pressure regulator lowers water pressure from water source; maintains 30 PSI
• Smart Loc™ multi-diameter fitting accommodates 16mm, 17mm, and 18mm tubing (0.680 – 0.710 in. OD); secures tubing with nut for a tight fit

Applications

• Connects to an existing valve for a quick and easy set up of a low volume drip irrigation zone
• Use above or below ground, protected by an irrigation valve box (sold separately)
• As part of a complete drip irrigation system, the drip zone kit provides components to optimize performance and extend lifespan of drip system

Materials & Sustainability

• Y filter housing made of Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent fading and cracking; filter screen made of polyester
• Pressure regulator and Smart Loc™ fitting are made of high-impact Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent fading and cracking
• Drip irrigation can reduce water usage by up to 70% compared to conventional sprinkler irrigation when used properly; for most drip irrigation products, water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Installation & Maintenance

• Use reducing bushing if necessary to transition from 1 in. pipe of water supply line to 3/4 in. Y filter; pressure regulator connects to Y filter; Smart Loc™ multi-diameter fitting makes the transition to various sizes of supply tubing
• Periodically check for leaks or damage and replace or repair as needed; filter can be flushed out by removing the flush cap and running water through or screen removed from housing to clean; recommended operating pressure is up to 50 PSI