(Part Number: CZK 100-30F) – Control Zone Kit with 1 in. Valve with Flow Control and 30 PSI Pressure-Regulating Filter – 0.2 – 5 GPM – Control Zone Kits – Control Zone Kits for Flowerpot Drip Systems – Efficient Water Management – Made in America – NDS

Get complete control zone kits tailored for flowerpot irrigation. Combine filtration and pressure regulation in one unit for optimal water use.

Call for Price

This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.

Key Features

Preassembled for convenience and ease of installation
Compact design makes it easier to fit inside valve box
Control the amount of water flowing through the valve by rotating the flow control stem
Internal bleed valve opens valve when kit is not connected to an irrigation controller
Pressure-regulating filter lowers water pressure and filters out particulates in water

Quick and easy set up of a low volume drip irrigation zone by using a preassembled kit
Use above or below ground, protected by an irrigation valve box (sold separately)
As part of a complete drip irrigation system, the control zone kit provides components to optimize performance and extend lifespan of drip system

Valve made of high-strength glass-filled nylon body and cover; stainless steel bolts; brass body inserts
Pressure-regulating filter is made of high-impact Acrylonitrile Butadiene Styrene (ABS) treated with UV inhibitors to prevent cracking; filter screen made of stainless steel
Drip irrigation can reduce water usage by up to 70% compared to conventional sprinkler irrigation when used properly; for most drip irrigation products, water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Connect inlet to 1 in. pipe of water supply line
Position pressure-regulating filter down and connect to 3/4 in. FPT or tubing adapter
Connect one solenoid wire to the controller common and the other wire to the controller power

Periodically check for leaks or damage and replace or repair as needed; filter can be flushed out by removing the flush cap and running water through or screen removed from housing to clean; recommended operating pressure is up to 50 PSI