InnerDuct, Lubricant, Lubricants
(Part Number – CGL-640) Polywater® CGL Lubricant – WCGL-640 – Lubricant – Lubricant – Polywater
Download Spec Sheet
WCGL-640
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
A high-performance slow-drying cable lubricant compatible with all cable jackets in the communications industry.
Polywater® CGL is a slow-drying cable lubricant that leaves a thin, slippery film that retains its lubricity for months after use. Polywater CGL does not sustain flame when used with fire-retardant cables and systems. Its dried residue is nonconductive and noncombustible. As a cable-jacket-compatible lubricant, CGL is ideal for fiber optic, copper or coaxial cable pulls.
Overview
LOW FRICTION COEFFICIENT
Tension reduction on all types of cable jackets
HIGH CLING FACTOR
Clings to jacket for better lubrication on long runs
SPECIFICATION GRADE
Meets performance requirements in outside plant and premise applications
CLEAN
Contains no grease or waxes and will not cement cables in conduit
COMPATIBLE
Including LSZH/LSHF, fire-rated, and plenum cable jackets
Brand
Polywater
Related products
-
Couplers, InnerDuct, InnerDuct Accessories
2.00″ Shur-Lock II Coupler SDR 2.375″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000123 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 1000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000132 -
Couplers, InnerDuct, InnerDuct Accessories
1.25″ Shur-Lock II Coupler HYB 1.590″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000121 -
Couplers, InnerDuct, InnerDuct Accessories
3.00″ Shur-Lock II Coupler SDR 3.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000173
