2Ft Cat5E Shielded (FTP) Ethernet Network Booted Cable White SKU: ATDS100602WT Subtotal: $1.34
Rack Accessories
Showing 649–672 of 1170 resultsSorted by price: high to low
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2436VFLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2436VFLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2436VFLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two-Post Extension Support Bracket RDAB Series – (RDAB2U31)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo-Post Extension Support Bracket RDAB Series – (RDAB2U31)
In the past, mounting deep equipment to a 2-post rack was a major challenge. Deep equipment, when not properly supported can sag and cause damage to the equipment housing. The RDAB is similar to a 2U shelf but allows the rack equipment to be positioned in the center of the rack. This helps stabilize the rack while using less space than having equipment mounted behind.
Features
- Constructed in 14-gauge steel.
- Available in four (4) depths.
- Angles mount to 19-inch, 23-inch and 24-inch EIA rack mounting rails.
- Ideal for mounting a UPS, Server, Switch, NVR and other rack-mount equipment.
- Mounts to the front and/or rear of the rack for maximum load rating.
- Finished in RAL9005 black powder paint.
- Includes all four (4) pieces shown as well as mounting hardware.
- Tested to nearly double the suggested load rating of 400 lbs (181 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: RDAB2U31 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
SDC Doors SDCD Series – (SDC9UD)
Features
- Constructed in 16-gauge steel.
- Easily installs into SDC Series using the included hardware.
- Includes quarter-turn lock and hinges to mount on the cabinet.
- Door Options solid door, 63% Vented Door, cable Entry/Fan Door.
- An additional non-door option is the conduit/fan Panel that mounts directly to either end of the cabinet.
- Conduit knockouts include 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8”.
- Also includes laser knockouts for optional fan kits.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: SDC9UD -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
SDC Doors SDCD Series – (SDC6UVD)
Features
- Constructed in 16-gauge steel.
- Easily installs into SDC Series using the included hardware.
- Includes quarter-turn lock and hinges to mount on the cabinet.
- Door Options solid door, 63% Vented Door, cable Entry/Fan Door.
- An additional non-door option is the conduit/fan Panel that mounts directly to either end of the cabinet.
- Conduit knockouts include 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8”.
- Also includes laser knockouts for optional fan kits.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: SDC6UVD -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Cable Lacing Bar CLB Series – (CLB190BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsCable Lacing Bar CLB Series – (CLB190BK)
The Cable Lacing Bar (CLB) reduces strain on cables connected to a patch panel or device. Available in three depths the CLB is sold in packs of ten (10) to reduce packaging.
Features:
- Constructed of 0.25″ steel rod.
- Designed to reduce cable strain.
- Available with no offset, 2″ or 4″ offset.
- Designed to fit standard EIA 19” rails.
- Sold in packages of ten (10) pieces.
- Finished in smooth RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CLB190BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP12WH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP12WH)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP12WH -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP12BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP12BK)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP12BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP10WH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP10WH)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP10WH -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP10BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP10BK)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP10BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP8BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP8BK)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP8BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP6WH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP6WH)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP6WH -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP6BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMAP6BK)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMAP6BK -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Panels
Aluminum Rack Panels PBPA Series – (PBPA19010BK2)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack PanelsAluminum Rack Panels PBPA Series – (PBPA19010BK2)
Features:
- Constructed of 8-gauge (0.125″) 5052-H32 Aluminum.
- Fits standard EIA-compliant rails.
- Install in unused rack space to improve both cooling efficiencies and prevent air re-circulation.
- Finished in smooth powder paint or unfinished.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: PBPA19010BK2 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Universal Rack Shelf RAS Series – (RASU190720BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesUniversal Rack Shelf RAS Series – (RASU190720BK1)
Features
- Constructed of 14 or 16 gauge steel.
- Universal design mounts to any standard EIA-compliant rack or cabinet.
- Allows easy rack mounting of equipment or items that do not have rack mounting capabilities.
- Mounts to rack rails either as an internal shelf or external shelf/work area.
- Available in either vented or solid versions.
- Rugged textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant
- Manufactured in North America
SKU: RASU190720BK1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
SDC Doors SDCD Series – (SDC6USD)
Features
- Constructed in 16-gauge steel.
- Easily installs into SDC Series using the included hardware.
- Includes quarter-turn lock and hinges to mount on the cabinet.
- Door Options solid door, 63% Vented Door, cable Entry/Fan Door.
- An additional non-door option is the conduit/fan Panel that mounts directly to either end of the cabinet.
- Conduit knockouts include 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8”.
- Also includes laser knockouts for optional fan kits.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: SDC6USD -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray VCT Series – (VCT85)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray VCT Series – (VCT85)
Features
- Constructed in 16-gauge steel.
- Designed to fit most Hammond cabinets and may be compatible with cabinets made by others.
- The folded (flange) edges increase strength and ease of managing cables.
- The VCT and VCTPDU Series includes cutouts for installing cable ties or hook and loop tie-offs.
- The VCTPDU also includes cutouts for toolless mounting of most PDUs that include a round plastic shouldered button.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VCT85 -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray VCT Series – (VCT78)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray VCT Series – (VCT78)
Features
- Constructed in 16-gauge steel.
- Designed to fit most Hammond cabinets and may be compatible with cabinets made by others.
- The folded (flange) edges increase strength and ease of managing cables.
- The VCT and VCTPDU Series includes cutouts for installing cable ties or hook and loop tie-offs.
- The VCTPDU also includes cutouts for toolless mounting of most PDUs that include a round plastic shouldered button.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VCT78 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Rack Screws with Pilot Point SCREW Series – (SCREWM6-100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsRack Screws with Pilot Point SCREW Series – (SCREWM6-100)
Don’t get screwed! Our screw pack features a convenient jar, starting point and factory-installed washer. If you’ve encountered difficult part numbers, this product is for you. The SCREW series offers packs of rack mounting screws designed for ease of installation. Factory hardened, these screws are strip-resistant and are available in a variety of convenient quantities.
Features
- Available in 10-32, 12-24 and M6 threading.
- Heat-treated to resist stripping.
- Self-guiding pilot/dog point.
- Includes factory-installed nylon washer.
- Finished in black oxide.
Specifications
- Quadrex truss oval head screw.
- ø 0.186 Diameter.
- 0.75″ Length.
- Machine screw with full dog point.
- UNF-2A Threaded.
- Heat-treated low-carbon steel to ANSI B18.6.3 standard.
- Captive flat washer constructed of black Nylon 6/6.
- Outside Diameter: 0.429″-0.439″
- Thickness: 0.030″-0.040″
SKU: SCREWM6-100 -
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Rack Isolation Kit RIK Series – (RIK19Z4)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsRack Isolation Kit RIK Series – (RIK19Z4)
The Rack Isolation Kit, isolates open frame racks from conductive flooring to prevent multiple ground paths.
Features
- Universal design works with most rack manufacturers.
- Use with Hammond and Rack Basics part numbers:
- RB-2P
- RB-2PA
- DNRRHDW
- DNRRHDKB
- DC4R
- DRZ4 *see specific version in table.
- Open-ended design allows for retrofit installation.
- Isolation plates constructed of glass reinforced thermoset polyester.
- Included in Kit:
- (2) isolation plates
- (4) isolation grommets
- Bolt-down C4K-Z4 kit sold separately.
SKU: RIK19Z4 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Four Post Fixed Depth Shelf RF Series – (RFUS1918BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesFour Post Fixed Depth Shelf RF Series – (RFUS1918BK1)
Features
- Constructed of heavy-duty 14 gauge steel.
- Front & rear lip folded for extra strength.
- The versatile design can be used upside down (front & rear lip become equipment retainers).
- Sides folded up for easy hardware installation from above.
- Sides are slotted for easy adjustment with most rail depth locations.
- Includes all mounting hardware.
- Tested to nearly double the suggested load rating of 350 lbs (159 kg).
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Please note that to mount this product you need to have two (2) pairs of combination rails within your cabinet. This product does not mount to the front and back of the rails like traditional rack mounting shelves.
If used with our CPR square hole rails you will need to order CPRSA rail adaptor for each shelf ordered.
SKU: RFUS1918BK1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two-Post Extension Support Bracket RDAB Series – (RDAB2U26)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo-Post Extension Support Bracket RDAB Series – (RDAB2U26)
In the past, mounting deep equipment to a 2-post rack was a major challenge. Deep equipment, when not properly supported can sag and cause damage to the equipment housing. The RDAB is similar to a 2U shelf but allows the rack equipment to be positioned in the center of the rack. This helps stabilize the rack while using less space than having equipment mounted behind.
Features
- Constructed in 14-gauge steel.
- Available in four (4) depths.
- Angles mount to 19-inch, 23-inch and 24-inch EIA rack mounting rails.
- Ideal for mounting a UPS, Server, Switch, NVR and other rack-mount equipment.
- Mounts to the front and/or rear of the rack for maximum load rating.
- Finished in RAL9005 black powder paint.
- Includes all four (4) pieces shown as well as mounting hardware.
- Tested to nearly double the suggested load rating of 400 lbs (181 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: RDAB2U26
