Rack Mounting Solutions
Showing 1273–1296 of 1884 resultsSorted by price: high to low
-
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Horizontal Steel Finger Cable Manager PCMDS Series – (RB-HFMD1)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHorizontal Steel Finger Cable Manager PCMDS Series – (RB-HFMD1)
Features:
- Constructed in 16-gauge steel.
- Snap open, hinged door.
- The rackmount side has five slotted openings.
- Openings in the rear for cable entry.
- Designed to fit standard 19” rails.
- Requires mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: RB-HFMD1 -
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Kits FK Series – (AVFK1AC120)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFan Kits FK Series – (AVFK1AC120)
Extend the life of your rack-mount equipment by increasing airflow within your server rack or cabinet. Hammond Fan Kits are available with one (1) or two (2) fans. Our fan kits come with the essentials and include chrome fan grills for added safety. Our fans run on AC Power and are available in both high CFM or low-decibel for audio/visual and office environments.
If your fans will be mounted more than 12″ apart when using the kits with two (2) fans, refer to the DNFC Fan Cord series listed in our accessories below for a longer single connection wire.
Features
- Kit includes:
- One (1) or Two (2) Ball bearing type fan(s).
- Two (2) chrome metal grills per fan.
- One (1) cord assembly.
- One (1) or Two (2) packages of mounting hardware.
- Fan component is recognized to UL 507 and CSA certified.
- Decibel (db) rating is measured at 12” to 24” from the source.
- Assembled in North America.
SKU: AVFK1AC120 - Kit includes:
-
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Cable Lacing Bar CLB Series – (CLB192BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsCable Lacing Bar CLB Series – (CLB192BK)
The Cable Lacing Bar (CLB) reduces strain on cables connected to a patch panel or device. Available in three depths the CLB is sold in packs of ten (10) to reduce packaging.
Features:
- Constructed of 0.25″ steel rod.
- Designed to reduce cable strain.
- Available with no offset, 2″ or 4″ offset.
- Designed to fit standard EIA 19” rails.
- Sold in packages of ten (10) pieces.
- Finished in smooth RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CLB192BK -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Square Hole Cage Nut CAGNUT Series – (1421CNBF100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsSquare Hole Cage Nut CAGNUT Series – (1421CNBF100)
Features
- Cage nuts for square hole rack mounting rails.
- Available in 10-32, 12-24 and M6 mounting profiles.
- Packaged in plastic clamshell or resealable jar (depending on quantity).
- Manufactured in North America.
- TAA Compliant.
Specifications
- Constructed of zinc-plated SAE 1050-1065 spring steel.
- 0.375in (9.54mm) square hole punched panel rails.
- Heat-treated through austempering.
- Recommended torque spec 31.4 +/- 20% inch-lbs
- Maximum load rating will vary depending on rail mounting and cabinet load rating.
Looking for screws as well? Get the CAGKIT that includes both screws and cage nuts.
Our legacy 25-pack https://ats-staging.hikmsystems.com/product/cagnut1032-50/ is priced to clear! 80% Off, available while supplies last! The cage nut is identical to the CAGNUT1032 but is the old part number.
SKU: 1421CNBF100 -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Vented Top Panel C2TV Series – (C2T1931VLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsVented Top Panel C2TV Series – (C2T1931VLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Provides passive airflow venting for cabinets.
- CE versions include cable entry grommets in all four (4) corners.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T1931VLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Vented Top Panel C2TV Series – (C2T1931VBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsVented Top Panel C2TV Series – (C2T1931VBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Provides passive airflow venting for cabinets.
- CE versions include cable entry grommets in all four (4) corners.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T1931VBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1931FLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1931FLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1931FLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1931FBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1931FBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1931FBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Grounding Bar and Bus Bars BUSBAR Series – (CBB38)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsGrounding Bar and Bus Bars BUSBAR Series – (CBB38)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CBB38 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Grounding Bar and Bus Bars BUSBAR Series – (GRDBAR23)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsGrounding Bar and Bus Bars BUSBAR Series – (GRDBAR23)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: GRDBAR23 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Casters and Leveling Feet, Hammond, Rack Accessories, Rack Mounting Solutions
Light Duty Caster Set 1425PHD Series – (1425PHD)
Casters and Leveling Feet, Hammond, Rack Accessories, Rack Mounting SolutionsLight Duty Caster Set 1425PHD Series – (1425PHD)
Features
- Features ball bearing swivel and hard composition wheels.
- Wheel is gray in color.
- Compatible with both RCH and REFK Series.
- Caster set has a weight capacity of 600 lbs (272 kg).
- Includes (2) locking and (2) non-locking casters
- Includes mounting hardware.
- RoHS and REACH compliant.
- Manufactured in North America
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Part No. Wheel Overall Height Hole Mounting Pattern Caster Set Quantity Caster Added Weight Included with Brakes Diameter to Cabinet Width Depth Capacity In Set Included 1425PHD 2.00 2.50 0.94 2.12 600 lbs (272 kg) 4 2 SKU: 1425PHD -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421A100)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421A100 -
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting Solutions
Mounting Screw and Cup Washer Combo-Pack 1421 Series – (1421100)
Hammond, Mounting Hardware, Rack Accessories, Rack Mounting SolutionsMounting Screw and Cup Washer Combo-Pack 1421 Series – (1421100)
The 1421 screw provides a standard 0.625” rack screws length with 10-32 threads. The screw itself features a slotted oval head and has a nickel plate finish.
SKU: 1421100 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
SDC Doors SDCD Series – (SDC9USD)
Features
- Constructed in 16-gauge steel.
- Easily installs into SDC Series using the included hardware.
- Includes quarter-turn lock and hinges to mount on the cabinet.
- Door Options solid door, 63% Vented Door, cable Entry/Fan Door.
- An additional non-door option is the conduit/fan Panel that mounts directly to either end of the cabinet.
- Conduit knockouts include 2.5”, 2.0”, 13/18”, 13/4”, 11/8” and/or 7/8”.
- Also includes laser knockouts for optional fan kits.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: SDC9USD -
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Grounding Bar and Bus Bars BUSBAR Series – (CBB35)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsGrounding Bar and Bus Bars BUSBAR Series – (CBB35)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CBB35 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Manager Extensions RRCH Series – (RRCMCH65)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Manager Extensions RRCH Series – (RRCMCH65)
Vertical cable manager extensions are a great way to manage and hide the visual appearance of network cables. Manager extensions mount either to the top of an enclosed cable trough or directly to a cable manager.
Features
- Constructed in 16-gauge steel.
- Mounting hardware included.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
RRCMCH & FRCMCH Features
- Comes unassembled with easy assembly and installation.
- Mounts directly to the top of the RRCM or RB-VCM Series.
RRCH Features
- Comes fully assembled with a removable access panel for simple cable installation.
- Mounts directly to the top of the RR19TM Series.
SKU: RRCMCH65 -
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Rack Mount Intake Blowers HB Series – (HB4UFILTER)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsRack Mount Intake Blowers HB Series – (HB4UFILTER)
Features
- Standard 19″ rack mount
- Air delivery from more than 50% of their 17″ width
- Internal neoprene isolation mounts reduce transmission of vibration to the rack
- Air intake only, to pressurize the rack with filtered air
- Heavy steel construction
- Attractive 19″ stainless steel grille included
- 115 VAC, 50/60 Hz. motor is UL recognized, CSA certified, ball bearing type, cooled by incoming air
- Includes permanent filter (replacement filters available below)
- Comes with a 6ft STJ 3- wire cord
- Optional replacement filters come in a pack of five (5).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: HB4UFILTER -
Assembled, Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Colocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCBP36BK)
Assembled, Hammond, Rack Mounting Solutions, Server Racks and CabinetsColocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCBP36BK)
The co-location rack cabinet system from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features.
Features
- Available in 44U mounting height.
- Available in 36”, 42” and 48″ depths.
- One single frame allows multiple bay configurations.
- Compatible with containment system and cable-trough accessories.
- Flush-mounted doors with locking swing handle.
- Side cable pass-thru knockouts.
- Optional solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Where applicable, the divider shelves are constructed of reinforced 16-gauge steel.
- The shelves are designed to support the most robust of equipment such as tower servers.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to frame, side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
PCI DSS Compliance
The CLC series is PCI-Compliant when:
- Multiple cabinets are connected together and/or the open side is closed in using the appropriate side panel (listed in the accessory table below).
- The cable manager security plates CLCCMSP are installed.
- The cable manager security covers CLCCMSC are installed.
Included Components
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs (Per bay) of adjustable depth EIA compliant square hole punched mounting rails.
- One (1) removable side panel (with 1/4 turn latches). An additional side panel is sold separately.
- Two (2) (Per bay) perforated front door (65% open area vented) with locking swing handle.
- Vented bay divider shelf with rear removable panels for vertical PDU installation.
Note: Cabinet TOP panels are NOT included and are sold separately. (See table below)
SKU: CLCBP36BK -
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120LG230)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFilter Fan Kits DNFF Series – (DNFF120LG230)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
SKU: DNFF120LG230 - Kit includes one (1) of the following:
-
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120CG230)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFilter Fan Kits DNFF Series – (DNFF120CG230)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
SKU: DNFF120CG230 - Kit includes one (1) of the following:
-
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120GY230)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFilter Fan Kits DNFF Series – (DNFF120GY230)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
SKU: DNFF120GY230 - Kit includes one (1) of the following:
-
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120LG115)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFilter Fan Kits DNFF Series – (DNFF120LG115)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
SKU: DNFF120LG115 - Kit includes one (1) of the following:
-
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120CG115)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFilter Fan Kits DNFF Series – (DNFF120CG115)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
SKU: DNFF120CG115 - Kit includes one (1) of the following:
-
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Filter Fan Kits DNFF Series – (DNFF120GY115)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFilter Fan Kits DNFF Series – (DNFF120GY115)
The DNFF Fan kit is ideal when sealing a cabinet or enclosure. Unlike the DNFK, the DNFF does not include an AC plug as it is designed to be hard-wired with or without a thermostat.
Features
- Kit includes one (1) of the following:
- Fan
- Plastic Filter Grill
- Filter
- Metal Grill
- Wire Cord or Leads (see table)
- Includes Mounting Hardware
- Flame retardant, ABS plastic filter fan grill is moulded in a choice of four colors to match our racks & accessories.
- “BK” (Black)
- “GY” (ANSI 61 Gray)
- “LG” (Light Gray – RAL7035)
- “CG” (Beige) – AVAILABLE WHILE SUPPLIED LAST
- Fan component is UL recognized to UL 507, and cUL recognized or CSA certified to CSA-C22.2 No. 113.
- The filter is designed to meet IP5X dust resistance.
- If required, complementary exhaust filter grill kits (without fan) available – see XPFA Series
SKU: DNFF120GY115 - Kit includes one (1) of the following:
