Rack Mounting Solutions
Showing 673–696 of 1884 resultsSorted by price: high to low
-
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
Locking Doors RSD Series – (RSDF19049LG1)
Features:
- 16-gauge steel construction.
- Mounts either right or left-hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: RSDF19049LG1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
Locking Doors RSD Series – (RSDL19049BK1)
Features:
- 16-gauge steel construction.
- Mounts either right or left-hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: RSDL19049BK1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
Locking Doors RSD Series – (RSDF19049BK1)
Features:
- 16-gauge steel construction.
- Mounts either right or left-hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: RSDF19049BK1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Rack Mount Locking Storage Drawer RDRW Series – (RDRW1900322LG1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesRack Mount Locking Storage Drawer RDRW Series – (RDRW1900322LG1)
Features
- Constructed of 14 and 16 gauge steel.
- Includes front plastic pull handle locking mechanism.
- Inside of drawer width is 16.12″ wide.
- Complete drawer with slides, hardware, lock & two keys.
- Available in 3 depths.
- Rear support brackets are included for all depths or can be supported from the rear rack rail.
- 6-Pack of 10-32 rack screws are included.
- Finished in textured powder paint.
- Tested to nearly double the suggested load rating of 145 lbs (66 kg) when mounted to two-pair/4-post rack rails.
- Rated for 60 lbs (27 kg) when mounted one-pair/2-post rack rails.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note that the interior smooth white drawer has been discontinued. Moving forward the drawer will match the housing finish. This is a rolling change and available as new production is completed. New design also features a cable entry cutout in the rear of the drawer.
SKU: RDRW1900322LG1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Rack Mount Locking Storage Drawer RDRW Series – (RDRW1900716LG1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesRack Mount Locking Storage Drawer RDRW Series – (RDRW1900716LG1)
Features
- Constructed of 14 and 16 gauge steel.
- Includes front plastic pull handle locking mechanism.
- Inside of drawer width is 16.12″ wide.
- Complete drawer with slides, hardware, lock & two keys.
- Available in 3 depths.
- Rear support brackets are included for all depths or can be supported from the rear rack rail.
- 6-Pack of 10-32 rack screws are included.
- Finished in textured powder paint.
- Tested to nearly double the suggested load rating of 145 lbs (66 kg) when mounted to two-pair/4-post rack rails.
- Rated for 60 lbs (27 kg) when mounted one-pair/2-post rack rails.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note that the interior smooth white drawer has been discontinued. Moving forward the drawer will match the housing finish. This is a rolling change and available as new production is completed. New design also features a cable entry cutout in the rear of the drawer.
SKU: RDRW1900716LG1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Rack Mount Locking Storage Drawer RDRW Series – (RDRW1900322BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesRack Mount Locking Storage Drawer RDRW Series – (RDRW1900322BK1)
Features
- Constructed of 14 and 16 gauge steel.
- Includes front plastic pull handle locking mechanism.
- Inside of drawer width is 16.12″ wide.
- Complete drawer with slides, hardware, lock & two keys.
- Available in 3 depths.
- Rear support brackets are included for all depths or can be supported from the rear rack rail.
- 6-Pack of 10-32 rack screws are included.
- Finished in textured powder paint.
- Tested to nearly double the suggested load rating of 145 lbs (66 kg) when mounted to two-pair/4-post rack rails.
- Rated for 60 lbs (27 kg) when mounted one-pair/2-post rack rails.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note that the interior smooth white drawer has been discontinued. Moving forward the drawer will match the housing finish. This is a rolling change and available as new production is completed. New design also features a cable entry cutout in the rear of the drawer.
SKU: RDRW1900322BK1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Rack Mount Locking Storage Drawer RDRW Series – (RDRW1900716BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesRack Mount Locking Storage Drawer RDRW Series – (RDRW1900716BK1)
Features
- Constructed of 14 and 16 gauge steel.
- Includes front plastic pull handle locking mechanism.
- Inside of drawer width is 16.12″ wide.
- Complete drawer with slides, hardware, lock & two keys.
- Available in 3 depths.
- Rear support brackets are included for all depths or can be supported from the rear rack rail.
- 6-Pack of 10-32 rack screws are included.
- Finished in textured powder paint.
- Tested to nearly double the suggested load rating of 145 lbs (66 kg) when mounted to two-pair/4-post rack rails.
- Rated for 60 lbs (27 kg) when mounted one-pair/2-post rack rails.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Note that the interior smooth white drawer has been discontinued. Moving forward the drawer will match the housing finish. This is a rolling change and available as new production is completed. New design also features a cable entry cutout in the rear of the drawer.
SKU: RDRW1900716BK1 -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Rack Cable Manager with Door RB-VCM Series – (RB-VCM44)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Rack Cable Manager with Door RB-VCM Series – (RB-VCM44)
Vertical cable managers facilitate cable organization for a single or multiple rack installation. The RB-VCM is cost-effective and includes a number of unique features to save you installation time.
Features
- Manager body and door are constructed of 16-gauge steel.
- All-steel construction with side and rear cut-outs for cable pass-through.
- Includes cable mounting lances for hook and loop cable organization.
- Mounts to either side of the open-frame rack (includes mounting hardware).
- The attached hinged door opens to one side and secures closed with two (2) small strips of the magnet.
- Horizontal stabilizers easily swing away for cable installation and swing back for structural support.
- Separated space easily allows for cables to be added or removed without fishing the cable.
- Manager and door finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Compatibility
- Designed specifically for the RB-2P but also compatible with:
- DRZ477
- DNRR**HDW Series
- DC4R Series
- RB-2PA Series
Looking for a Finger Manager?
- Single-Sided Vertical Finger Manager – FRCM Series
- Double-Sided Vertical Finger Manager – VFM Series
Part of the Rack Basics® line of economy rack solutions.
Videos
SKU: RB-VCM44 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
HWC Locking Door HWCD Series – (HWCSD3027UBK)
Doors, Hammond, Rack Accessories, Rack Mounting SolutionsHWC Locking Door HWCD Series – (HWCSD3027UBK)
Features:
- 16-gauge steel construction.
- Door styles available solid, tinted acrylic with venting, 64% airflow vented.
- For use with the Hammond HWC Series.
- In addition, the hinges can be mounted on the left or right.
- Includes snap-latch lock and two keys.
- Includes door mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HWCSD3027UBK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails H1R Series – (H1TRR52U31BK)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails H1R Series – (H1TRR52U31BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1TRR52U31BK -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1936F10CELG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1936F10CELG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1936F10CELG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1931F10LG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1931F10LG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1931F10LG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1936F10CEBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1936F10CEBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1936F10CEBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1931F10BK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1931F10BK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1931F10BK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (CDF1949SLG1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CDF1949SLG1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (CDF1949SBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CDF1949SBK1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Instrument Rack Cabinet RCBS Series – (RCBS1901224LG1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsInstrument Rack Cabinet RCBS Series – (RCBS1901224LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of fixed 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack CLPKIT1032-10 clip nuts and rack screws.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Tested to nearly double the suggested load rating of 600 lbs (272 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCBS1901224LG1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Instrument Rack Cabinet RCBS Series – (RCBS1901224BK1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsInstrument Rack Cabinet RCBS Series – (RCBS1901224BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of fixed 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack CLPKIT1032-10 clip nuts and rack screws.
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Tested to nearly double the suggested load rating of 600 lbs (272 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCBS1901224BK1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Modular Test & Measurement Rack Cabinet C2 Series – (CSP3536LG1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsModular Test & Measurement Rack Cabinet C2 Series – (CSP3536LG1)
When you prefer complete flexibility, our modular C2 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include
- 20U, 24U, 28U, 32U, 36U, 40U, 45U, and 49U mounting heights.
- 23″ overall frame widths.
- 23.62″, 31.5″ and 36″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- Mounting rails are sold separately and are available with square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, louvre vented, vented, window, and vented window.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening, available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid or gland membrane.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Click here to see our Pre-Assembled C2RR Cabinet Series
Are you looking for the CAK for wider legacy C2 cabinets? Click here.
SKU: CSP3536LG1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Modular Test & Measurement Rack Cabinet C2 Series – (CSP3536BK1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsModular Test & Measurement Rack Cabinet C2 Series – (CSP3536BK1)
When you prefer complete flexibility, our modular C2 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include
- 20U, 24U, 28U, 32U, 36U, 40U, 45U, and 49U mounting heights.
- 23″ overall frame widths.
- 23.62″, 31.5″ and 36″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- Mounting rails are sold separately and are available with square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, louvre vented, vented, window, and vented window.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening, available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid or gland membrane.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- Load rated for up to 1,500 lbs (680 kg).
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured black or RAL 7035 light gray powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Click here to see our Pre-Assembled C2RR Cabinet Series
Are you looking for the CAK for wider legacy C2 cabinets? Click here.
SKU: CSP3536BK1 -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2423F4TLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2423F4TLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2423F4TLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Hammond, Knockdown Open Frame Racks, Open Frame Racks, Rack Mounting Solutions
2-Post Open Frame Rack RB-2PA Series – (RB-2PA1945NF)
Hammond, Knockdown Open Frame Racks, Open Frame Racks, Rack Mounting Solutions2-Post Open Frame Rack RB-2PA Series – (RB-2PA1945NF)
Features:
- Constructed of 5052H32 aluminum.
- EIA compliant 12-24 threaded mounting rails on both sides of rail.
- Numbered rail markings.
- Side ganging and accessory mounting hole provisions.
- The rack ships unassembled and features a self-squaring design for easy assembly.
- Includes a 30-pack of 12-24 mounting hardware.
- Available in either anodized natural satin or black finish.
- Load rated to 1,500 lbs (680 kg) of equipment load capacity.
- RoHS Compliant.
Part of the Rack Basics® line of economy rack solutions
SKU: RB-2PA1945NF -
Assembled, Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Data Center Server Cabinet H1 Series – (H1SP42U42BK)
Assembled, Hammond, Rack Mounting Solutions, Server Racks and CabinetsData Center Server Cabinet H1 Series – (H1SP42U42BK)
The H1 series is designed to be your most complete offering for Server, Network, and Data Storage applications. This series incorporates Hammond Manufacturing”s practical open-design and manufacturing principles with legendary service, support, and reliability. H1 cabinets feature an array of enhancements over traditional cabinets, with cooling performance and enhanced security features demanded by today’s IT manager.
Features
- Available in 42U, 45U, 48U, and 52U mounting heights.
- 24” Width Frame Features:
- Generous cabling space
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- 30” & 31.5″ Width Frame Features:
- Mounting rails in 30″ and 31.5″ wide frames include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- The cabinet top includes four (4) 3.5” wide cable entry holes.
- Support for vertical cable managers without obstructing mounting rails.
- Available in 42″ and 48″ overall depths.
- Two (2) large 4″ x 7″ knockouts (per side) for cable pass-through.
- Side panels are sold separately.
- 42U and 45U are full-height panels.
- 48U and 52U are split height panels.
- 48″ depth cabinet includes:
- Two (2) large 4″ x 7″ knockouts for cable entry knockouts at the front/top.
- C-channel struts provide cabinet strength, ease, and flexibility to adjust mounting rails.
- Surface-mounted doors allow for full mounting depth utilization and include a locking swing handle.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and optional side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are powder coat finished.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Rolling caster load rated for up to 2,200 lbs (998 kg) and Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to the frame, side panels, and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Included Components
- Welded steel frame with factory-installed nylon leveling feet, recessed casters, and grounding studs.
- Two (2) pairs of adjustable depth EIA-compliant square hole punched mounting rails.
- Starter pack of CAGKIT1032-50 screws and cage nuts.
- One (1) perforated front door (79% open area vented) with locking swing handle.
- One (1) perforated split/barn rear door (79% open area vented) with locking swing handle.
- One (1) solid and one (1) brushed cable entry top panels are interchangeable.
- One (1) PDU cable tray is mounted in the rear.
Note: Cabinet side panels are NOT included and are sold separately. (See table below)
SKU: H1SP42U42BK
