Hammond
Showing 1441–1464 of 2350 resultsSorted by price: high to low
-
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1582-S Series – (1582H6A1S)
Features
- Designed for power distribution from the front of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with lighted on/off switch or red pilot light to indicate power on.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Green indicator light confirms surge module is active.
- Internal protection will disconnect the surge module at the end of it’s useful life (and extinguish the green light) but will maintain power to the load, now unprotected.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1582H6A1S -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1582E DP Series – (1582H8E1BKDP)
Features
- On-Off switch is rocker type (double pole, single throw) with green light.
- Rated 100-240VAC (TUV), 120-240VAC (UL), 10A, 50/60Hz
- Designed for power distribution on front or rear of unit with IEC power cords.
- 1U horizontal 19″ rackmount installation.
- All steel housing with black powder coat finish.
Specifications
- Includes 10A circuit breakers to prevent accidental line overload.
- cULus Listed UL 62368-1 (2nd Edition), 2014-12-01, and CAN/CSA C22.2 No. 62368-1-14 (2nd Edition).
- TÜV-SUD Certified to EN 62368-1:2014/A11:2017, and IEC 62368-1:2014 (2nd Edition)
- TÜV-SUD tested for EMC Compliance to EN 55032:2012 (CISPR 32:2012) & EN 55024:2010 (CISPR 24:2010).
- CE compliant to the European Low Voltage Directive 2014/35/EU.
- CE compliant to the European EMC Directive 2014/30/EU.
- UKCA compliant to British Electrical Equipment (Safety) Regulations 2016 (S.I. 2016/1101)
- UKCA compliant to British Electromagnetic Compatibility Regulations 2016 (S.I. 2016/1091)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Accessories
SKU: 1582H8E1BKDP -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1589-RF-RR Series – (1589T8F1BKRR)
Features
- Designed for power distribution from front or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with on/off switch or red pilot light to indicate power on.
Specifications
- Heavy duty 12 gauge wire cord – 12/3 SJT type for extreme temperature ranges and integral molded plug.
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- Includes 20 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Operating temperature is from -20 degrees C to +60 degrees C
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1589T8F1BKRR -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1589-RF-RR Series – (1589T6D1BKRR)
Features
- Designed for power distribution from front or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with on/off switch or red pilot light to indicate power on.
Specifications
- Heavy duty 12 gauge wire cord – 12/3 SJT type for extreme temperature ranges and integral molded plug.
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- Includes 20 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Operating temperature is from -20 degrees C to +60 degrees C
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1589T6D1BKRR -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1589-RF-RR Series – (1589T8F1BKRF)
Features
- Designed for power distribution from front or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with on/off switch or red pilot light to indicate power on.
Specifications
- Heavy duty 12 gauge wire cord – 12/3 SJT type for extreme temperature ranges and integral molded plug.
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- Includes 20 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Operating temperature is from -20 degrees C to +60 degrees C
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1589T8F1BKRF -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1589-RF-RR Series – (1589H8F1BKRR)
Features
- Designed for power distribution from front or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with on/off switch or red pilot light to indicate power on.
Specifications
- Heavy duty 12 gauge wire cord – 12/3 SJT type for extreme temperature ranges and integral molded plug.
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- Includes 20 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Operating temperature is from -20 degrees C to +60 degrees C
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1589H8F1BKRR -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1589-RF-RR Series – (1589H8F1BKRF)
Features
- Designed for power distribution from front or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- Available with on/off switch or red pilot light to indicate power on.
Specifications
- Heavy duty 12 gauge wire cord – 12/3 SJT type for extreme temperature ranges and integral molded plug.
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- Includes 20 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Operating temperature is from -20 degrees C to +60 degrees C
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1589H8F1BKRF -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T24F1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T24F1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T18C1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T18C1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589H24F1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeSKU: 1589H24F1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589H18C1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeSKU: 1589H18C1 -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583T6D1)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583T6D1 -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583T12A1BKX)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583T12A1BKX -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583T12B1BKX)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583T12B1BKX -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583T6C1BKX)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583T6C1BKX -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583T6D1BKX)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583T6D1BKX -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583T8D1BK)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583T8D1BK -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583H12A1BKX)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583H12A1BKX -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU 1583 Series – (1583H12B1BKX)
Features
- Designed for power distribution from the front and/or rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With illuminated on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug-in transformers.
- Available in ASA 61 grey or black powder coat finish.
- Click here for our surge-protected version.
Specifications
- Heavy-duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral moulded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- UL/cUL recognized Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeSKU: 1583H12B1BKX
