Hammond
Showing 1153–1176 of 2350 resultsSorted by price: high to low
-
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Panel Assembly PPG Series – (PPGPFPA)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFan Panel Assembly PPG Series – (PPGPFPA)
Features
- Choice of two or three fan models – mounted on a standard width 19″ rack panel – shipped assembled as shown.
- The front of the panel is punched for finger protection and the rear of the fans assembled with metal guards
- Perfect as an exhaust fan panel or when using “push-pull” cooling (ie..unit pulls air out of the rack cabinet)
- Rugged textured black powder paint finish.
- Two (2) or Three (3) fan daisy chain wire lead/cord, 72″ in length.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: PPGPFPA -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Horizontal Lacing Strip HCM Series – (HCM196BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHorizontal Lacing Strip HCM Series – (HCM196BK)
Features:
- Constructed of 14 gauge steel.
- Steel organizer or provides cable strain relief.
- Available with either 90 or 45-degree offset.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HCM196BK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails H1R Series – (H1SRR20U24BK)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails H1R Series – (H1SRR20U24BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1SRR20U24BK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails H1R Series – (H1TRR18U24BK)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails H1R Series – (H1TRR18U24BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1TRR18U24BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UWH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray with PDU Support H1PDU Series – (H1PDU45UWH)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U ” 70.25”
- H1 45U ” 75.50”
- H1 48U ” 80.75”
- H1 52U ” 87.75”
SKU: H1PDU45UWH -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU52UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray with PDU Support H1PDU Series – (H1PDU52UBK)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U ” 70.25”
- H1 45U ” 75.50”
- H1 48U ” 80.75”
- H1 52U ” 87.75”
SKU: H1PDU52UBK -
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Kits FK Series – (DNFK2AC120)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsFan Kits FK Series – (DNFK2AC120)
Extend the life of your rack-mount equipment by increasing airflow within your server rack or cabinet. Hammond Fan Kits are available with one (1) or two (2) fans. Our fan kits come with the essentials and include chrome fan grills for added safety. Our fans run on AC Power and are available in both high CFM or low-decibel for audio/visual and office environments.
If your fans will be mounted more than 12″ apart when using the kits with two (2) fans, refer to the DNFC Fan Cord series listed in our accessories below for a longer single connection wire.
Features
- Kit includes:
- One (1) or Two (2) Ball bearing type fan(s).
- Two (2) chrome metal grills per fan.
- One (1) cord assembly.
- One (1) or Two (2) packages of mounting hardware.
- Fan component is recognized to UL 507 and CSA certified.
- Decibel (db) rating is measured at 12” to 24” from the source.
- Assembled in North America.
SKU: DNFK2AC120 - Kit includes:
-
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Variable Depth Shelf DNRM Series – (DNRMU19BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Variable Depth Shelf DNRM Series – (DNRMU19BK1)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
- Constructed of heavy-duty 16 gauge steel.
- Choice of 19″ or 24″ deep (19″ deep shown).
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips folded for extra strength & become equipment retainers.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 300 lbs (136 kg).
- For a similar design rated for 550 lbs (227 kg), see the BRS Series.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNRMU19BK1 -
Hammond, Handles & Locks, Rack Accessories, Rack Mounting Solutions
Side Panel Locking Kit CSPQTRL Series – (CSPQTRL)
Hammond, Handles & Locks, Rack Accessories, Rack Mounting SolutionsSide Panel Locking Kit CSPQTRL Series – (CSPQTRL)
For higher security, the quarter turn fasteners on the side panels can be replaced with this key locking version.
Features
- Field-installable.
- Interchangeable with standard quarter turn latches on side panels.
- For use with one (1) cabinet with two (2) side panels.
- Maintains NEMA, UL and CSA ratings as noted.
- RoHS Compliant.
- Manufactured in North America.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Part No. Material NEMA Rating Product Compatibility Quarter Turn
Locks IncludedNumber of Keys
IncludedCSPQTRL Zinc Die/Chrome n/a (internal use only) C2, C4 4 8 C3SPQTRL Zinc Die/Chrome 12 C3 4 8 SKU: CSPQTRL -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Vented Top Panel C2TV Series – (C2T1936VCELG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsVented Top Panel C2TV Series – (C2T1936VCELG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Provides passive airflow venting for cabinets.
- CE versions include cable entry grommets in all four (4) corners.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T1936VCELG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Vented Top Panel C2TV Series – (C2T1936VCEBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsVented Top Panel C2TV Series – (C2T1936VCEBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Provides passive airflow venting for cabinets.
- CE versions include cable entry grommets in all four (4) corners.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2T1936VCEBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Panels
Rack Rail Reducer Panel PBAS Series – (PBAS19010LG2)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack PanelsRack Rail Reducer Panel PBAS Series – (PBAS19010LG2)
Features:
- Constructed in 14-gauge steel.
- EIA-compliant round punched hole or tapped 12-24 for 19” mounting.
- Converts standard 23-inch or 24-inch rack mounting rails to 19-inch rack mounting.
- Sold in pairs.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: PBAS19010LG2 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T60G1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T60G1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589H60G1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
Vertical Outlet Strip Mounting Clip Kit
SKU: 1589H60G1 -
Assembled, Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Colocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCST48BK)
Assembled, Hammond, Rack Mounting Solutions, Server Racks and CabinetsColocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLCST48BK)
The co-location rack cabinet system from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features.
Features
- Available in 44U mounting height.
- Available in 36”, 42” and 48″ depths.
- One single frame allows multiple bay configurations.
- Compatible with containment system and cable-trough accessories.
- Flush-mounted doors with locking swing handle.
- Side cable pass-thru knockouts.
- Optional solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Where applicable, the divider shelves are constructed of reinforced 16-gauge steel.
- The shelves are designed to support the most robust of equipment such as tower servers.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to frame, side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
PCI DSS Compliance
The CLC series is PCI-Compliant when:
- Multiple cabinets are connected together and/or the open side is closed in using the appropriate side panel (listed in the accessory table below).
- The cable manager security plates CLCCMSP are installed.
- The cable manager security covers CLCCMSC are installed.
Included Components
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs (Per bay) of adjustable depth EIA compliant square hole punched mounting rails.
- One (1) removable side panel (with 1/4 turn latches). An additional side panel is sold separately.
- Two (2) (Per bay) perforated front door (65% open area vented) with locking swing handle.
- Vented bay divider shelf with rear removable panels for vertical PDU installation.
Note: Cabinet TOP panels are NOT included and are sold separately. (See table below)
SKU: CLCST48BK -
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1583-S Series – (1583H6D1S)
Features
- Designed for power distribution from the rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With lighted on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug in transformers.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1583H6D1S -
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Grounding Bar and Bus Bars BUSBAR Series – (CBB77)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsGrounding Bar and Bus Bars BUSBAR Series – (CBB77)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CBB77 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CPR56SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CPR56SZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CPR56SZPL
