Hammond
Showing 1057–1080 of 2350 resultsSorted by price: high to low
-
Hammond, PDUs and Outlet Strips
Rack Mount Basic PDU with Surge 1583-S Series – (1583H6D1SBK)
Features
- Designed for power distribution from the rear of the unit.
- 1U horizontal 19″ rackmount installation.
- With lighted on/off switch or red pilot light to indicate power on.
- 6 outlet models include 2 outlets with extra spacing for clearance of most plug in transformers.
- Click here for our non-surge protected version.
Specification
- Heavy duty 14 gauge wire cord – 14/3 SJT type for extreme temperature ranges and integral molded plug.
- Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload.
- Surge protected panels incorporate our surge module:
- Max Energy (Joules) is 1080 J.
- 25000 Amp rated MOV’s for a total of 75,000 Amps of single pulse transient current.
- Voltage Protection Rating (Vpr) of 500V, in all 3 modes (L-N, L-G, N-G).
- Nominal Discharge Current (In) of 5kA.
- Voltage suppression at the outlet guards against transients from equipment on the outlet strip.
- cRUus recognized to UL 1449 & C22.2 No. 269.3-17 & No. 269.4-17, for Surge Protective Devices – Type 3 & Type 4.
- cRUus recognized to UL 1363 & C22.2 No. 308-18, for Relocatable Power Taps & Multi Outlet Assemblies.
- Finished in RAL9005 black or ASA61 gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Plug Types
5-15P Straight Blade
L5-15P Locking TypeAccessories
SKU: 1583H6D1SBK -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T70C1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T70C1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589T48D116)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
SKU: 1589T48D116 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589H70D1)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
Vertical Outlet Strip Mounting Clip Kit
SKU: 1589H70D1 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU 1589H-T Series – (1589H48D116)
Features
- Low-profile slim design.
- Constructed of rugged light weight aluminum.
- Designed for a variety of applications:
- Install in your server cabinets
- Wall mount cabinets
- Open frame racks
- Or install horizontally above your work bench.
- Each outlet strip included a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch or pilot light and 20 Amp circuit breaker.
Specifications
- CSA certified, Standards C22.2 (No. 21-95 and No. 42-99)
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14
- Heavy duty 12 gauge wire cord – 12/3 SJT for extreme temperature ranges and integral molded plug.
- Operating temperature is from -20 degrees C to +60 degrees C
- Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot).
- Plug types available are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the amhul struts.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Plug Types
5-20P Straight Blade
L5-20P Locking TypeAccessories
- Vertical Outlet Strip Mounting Clip Kit
SKU: 1589H48D116 -
Hammond, PDUs and Outlet Strips
Vertical Basic PDU with Shielded Cord 1588-9-JV Series – (1588H12D1JV)
Hammond, PDUs and Outlet StripsVertical Basic PDU with Shielded Cord 1588-9-JV Series – (1588H12D1JV)
Features
- Low-profile slim design constructed of rugged light weight aluminum.
- Designed for a variety of applications, specifically where electromagnetic or radio frequency interference is a concern:
- Shielded cord reduces EMI/ RFI and “dirty” power from utilities.
- Shielding is by way of 100% coverage in aluminum mylar foil with a 20 gauge drain wire.
- Each outlet strip includes a hardware mounting kit. Order P/N: 1585CLIP for additional hardware kit.
- Includes toolless PDU button mounting provision.
- Receptacles are 1” square and are equally spaced over the length of the power strip.
- With on/off switch and 15 or 20 Amp circuit breaker.
Specifications
- Heavy duty cord, either 12 gauge (12/3 SJT) or 14 gauge (14/3 SJT) wire for extreme temperature ranges and integral molded plug.
- Plug types for 15 Amp models are NEMA 5-15P straight blade or NEMA L5-15P locking type.
- Plug types for 20 Amp models are NEMA 5-20P straight blade or NEMA L5-20P locking type.
- Rated 15 or 20 amps, 120 volts.
- UL/cUL Listed Standard UL1363 file No. E166039 & CSA C22.2 No. 308-14 & CSA C22.2 No. 0.4-04
- NOTE #1: Outlet strips can NOT be used between the front & rear panel rails of rack cabinets as they (and the equipment plugs) will interfere with mounted equipment and mounted accessories.
- NOTE #2: To properly use on rack cabinets, allow sufficient depth BEHIND the rear panel rails for vertically mounting to the cabinet.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Toolless button PDU mounting provision shown
Plug Types
5-15P Straight Blade
L5-15P Locking Type
5-20P Straight Blade
L5-20P Locking TypeSKU: 1588H12D1JV -
Assembled, Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Colocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLSR44U)
Assembled, Hammond, Rack Mounting Solutions, Server Racks and CabinetsColocation/ Multi-Bay Server Rack Cabinet CLC Series – (CLSR44U)
The co-location rack cabinet system from Hammond features four (4) different bay configurations and several roof options. Whether you are leasing the space or want to restrict access to sections of your cabinet, the Hammond CLC Series is loaded with innovative features.
Features
- Available in 44U mounting height.
- Available in 36”, 42” and 48″ depths.
- One single frame allows multiple bay configurations.
- Compatible with containment system and cable-trough accessories.
- Flush-mounted doors with locking swing handle.
- Side cable pass-thru knockouts.
- Optional solid side panels.
- One (1) interchangeable top panel.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
- Where applicable, the divider shelves are constructed of reinforced 16-gauge steel.
- The shelves are designed to support the most robust of equipment such as tower servers.
- UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Grounding studs bonded to frame, side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
PCI DSS Compliance
The CLC series is PCI-Compliant when:
- Multiple cabinets are connected together and/or the open side is closed in using the appropriate side panel (listed in the accessory table below).
- The cable manager security plates CLCCMSP are installed.
- The cable manager security covers CLCCMSC are installed.
Included Components
- Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
- Two (2) pairs (Per bay) of adjustable depth EIA compliant square hole punched mounting rails.
- One (1) removable side panel (with 1/4 turn latches). An additional side panel is sold separately.
- Two (2) (Per bay) perforated front door (65% open area vented) with locking swing handle.
- Vented bay divider shelf with rear removable panels for vertical PDU installation.
Note: Cabinet TOP panels are NOT included and are sold separately. (See table below)
SKU: CLSR44U -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
Solid Locking Door RCHD Series – (RCHD1928LG1)
Doors, Hammond, Rack Accessories, Rack Mounting SolutionsSolid Locking Door RCHD Series – (RCHD1928LG1)
Features:
- 16-gauge steel construction.
- Mounts either right or left hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Finished in rugged textured powder paint to match RCH enclosures.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for vented doors? The SDC Series has optional vented doors.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Use with Cabinet Panel Height Part No. Part No. Part No. RAL 7035 Additional Pair of Rack Units Height Black Door Light Gray Door Mounting Rails 5U 8.75 RCHD1908BK1 RCHD1908LG1 RCHR1908 6U 10.50 RCHD1910BK1 RCHD1910LG1 RCHR1910 8U 14.00 RCHD1914BK1 RCHD1914LG1 RCHR1914 10U 17.50 RCHD1917BK1 RCHD1917LG1 RCHR1917 13U 22.75 RCHD1922BK1 RCHD1922LG1 RCHR1922 16U 28.00 RCHD1928BK1 RCHD1928LG1 RCHR1928 SKU: RCHD1928LG1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
Solid Locking Door RCHD Series – (RCHD1928BK1)
Doors, Hammond, Rack Accessories, Rack Mounting SolutionsSolid Locking Door RCHD Series – (RCHD1928BK1)
Features:
- 16-gauge steel construction.
- Mounts either right or left hand hinge (door & cabinet are symmetrical).
- Includes installed lock and two keys.
- Finished in rugged textured powder paint to match RCH enclosures.
- Includes mounting hardware.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for vented doors? The SDC Series has optional vented doors.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Use with Cabinet Panel Height Part No. Part No. Part No. RAL 7035 Additional Pair of Rack Units Height Black Door Light Gray Door Mounting Rails 5U 8.75 RCHD1908BK1 RCHD1908LG1 RCHR1908 6U 10.50 RCHD1910BK1 RCHD1910LG1 RCHR1910 8U 14.00 RCHD1914BK1 RCHD1914LG1 RCHR1914 10U 17.50 RCHD1917BK1 RCHD1917LG1 RCHR1917 13U 22.75 RCHD1922BK1 RCHD1922LG1 RCHR1922 16U 28.00 RCHD1928BK1 RCHD1928LG1 RCHR1928 SKU: RCHD1928BK1 -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Tray with PDU Support H1PDU Series – (H1PDU52UWH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Tray with PDU Support H1PDU Series – (H1PDU52UWH)
Features
- Constructed in 16-gauge steel.
- Designed to fit H1 cabinets manufactured by Hammond Mfg.
- The folded (flange) edges increase strength and ease of managing cables.
- Includes cutouts for installing cable ties or hook and loop tie-offs.
- Includes cutouts for tool-free mounting of most PDUs that include a round plastic shouldered button.
- Includes cabinet mounting hardware.
- Finished in textured RAL9005 black or RAL9003 white powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
- black powder paint finish.
PDU Mounting Compatibility
The H1The maximum space for the PDU to fit including large power plugs:
- H1 42U ” 70.25”
- H1 45U ” 75.50”
- H1 48U ” 80.75”
- H1 52U ” 87.75”
SKU: H1PDU52UWH -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Variable Depth Shelf DNRM Series – (DNRMU2324BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Variable Depth Shelf DNRM Series – (DNRMU2324BK1)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
- Constructed of heavy-duty 16 gauge steel.
- Choice of 19″ or 24″ deep (19″ deep shown).
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips folded for extra strength & become equipment retainers.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 300 lbs (136 kg).
- For a similar design rated for 550 lbs (227 kg), see the BRS Series.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNRMU2324BK1 -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Variable Depth Shelf DNRM Series – (DNRMU1924BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Variable Depth Shelf DNRM Series – (DNRMU1924BK1)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
- Constructed of heavy-duty 16 gauge steel.
- Choice of 19″ or 24″ deep (19″ deep shown).
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips folded for extra strength & become equipment retainers.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 300 lbs (136 kg).
- For a similar design rated for 550 lbs (227 kg), see the BRS Series.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNRMU1924BK1 -
Hammond, Handles & Locks, Rack Accessories, Rack Mounting Solutions
Door Lock Replacement Kit DLRK Series – (CH4PCOMB)
Hammond, Handles & Locks, Rack Accessories, Rack Mounting SolutionsDoor Lock Replacement Kit DLRK Series – (CH4PCOMB)
Extend the life of your product by replacing or upgrading your lock. While we don’t sell replacement keys, we do offer replacement lock sets. Each Door Lock Replacement Kit (DLRK) has been reviewed to ensure compatibility with your favourite Hammond rack cabinet.
Features
- Simple to install in the field.
- Interchangeable with existing lock.
- Latches each include two (2) keys.
- Great for DIY applications.
- RoHS and REACH compliant.
SKU: CH4PCOMB -
Hammond, Handles & Locks, Rack Accessories, Rack Mounting Solutions
Door Lock Replacement Kit DLRK Series – (CH3PCOMB)
Hammond, Handles & Locks, Rack Accessories, Rack Mounting SolutionsDoor Lock Replacement Kit DLRK Series – (CH3PCOMB)
Extend the life of your product by replacing or upgrading your lock. While we don’t sell replacement keys, we do offer replacement lock sets. Each Door Lock Replacement Kit (DLRK) has been reviewed to ensure compatibility with your favourite Hammond rack cabinet.
Features
- Simple to install in the field.
- Interchangeable with existing lock.
- Latches each include two (2) keys.
- Great for DIY applications.
- RoHS and REACH compliant.
SKU: CH3PCOMB -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails C4PR Series – (C4PR2473SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails C4PR Series – (C4PR2473SZPL)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in cabinet.
- Use with C4 and C4RR Cabinet series.
- Includes strut mounting hardware (for both rails).
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
10-32 Tapped Rail Features
- Constructed in 10-gauge steel
- EIA compliant drilled and tapped 10-32 holes
Square Hole Punched Rail Features
- Constructed in 12-gauge steel
- EIA compliant square hole punched (allows choice of cage nuts for 10-32, https://ats-staging.hikmsystems.com/product/c4pr2442szpl/, 1/4-20 or M6 cage nuts).
SKU: C4PR2473SZPL -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails C4PR Series – (C4PR4223TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails C4PR Series – (C4PR4223TZPL)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in cabinet.
- Use with C4 and C4RR Cabinet series.
- Includes strut mounting hardware (for both rails).
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
10-32 Tapped Rail Features
- Constructed in 10-gauge steel
- EIA compliant drilled and tapped 10-32 holes
Square Hole Punched Rail Features
- Constructed in 12-gauge steel
- EIA compliant square hole punched (allows choice of cage nuts for 10-32, https://ats-staging.hikmsystems.com/product/c4pr2442szpl/, 1/4-20 or M6 cage nuts).
SKU: C4PR4223TZPL -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Heavy Duty Battery Shelf BRS Series – (BRS2P1919BK)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Heavy Duty Battery Shelf BRS Series – (BRS2P1919BK)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks.
- Constructed of heavy-duty 12-gauge steel.
- Use to support heavy chassis or batteries for DC battery array.
- Choice of 19-inch or 24-inch deep.
- The front and rear lips are folded and welded for extra strength and liquid retainer.
- For a similar design that is light-duty and vented, see the DNRM Series.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 550 lbs (250 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
19 Inch Rack Mounting Shelf
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height Width Depth BRS2P1919BK 3U 5.25 19.00 19.00 BRS2P1924BK 3U 5.25 19.00 24.00 23 Inch Rack Mounting Shelf
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height Width Depth BRS2P2319BK 3U 5.25 23.00 19.00 BRS2P2324BK 3U 5.25 23.00 24.00 What’s Inside the Box
Qty Included Description Replacement Part No. 1 Rack Shelf 4 Rack mounting brackets 1 Assembly Instructions 8 10-32 Keps nut 16 10-32 x 0.5in Assembly screws 8 12-24 x 0.5in Screws SKU: BRS2P1919BK -
Casters and Leveling Feet, Hammond, Rack Accessories, Rack Mounting Solutions
Cabinet Caster Set 1425B Series – (1425BHLOCK)
Casters and Leveling Feet, Hammond, Rack Accessories, Rack Mounting SolutionsCabinet Caster Set 1425B Series – (1425BHLOCK)
Features
- Ball bearing, swivel and hard composition phenolic wheels.
- Includes mounting hardware.
- Plated zinc finish.
- TAA compliant for GSA Schedule purchases.
- RoHS and REACH Compliant.
- Manufactured in North America.
SKU: 1425BHLOCK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Horizontal Lacing Strip HCM Series – (HCM198BK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHorizontal Lacing Strip HCM Series – (HCM198BK)
Features:
- Constructed of 14 gauge steel.
- Steel organizer or provides cable strain relief.
- Available with either 90 or 45-degree offset.
- Finished in RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HCM198BK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CPR70SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CPR70SZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CPR70SZPL -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CCR54TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CCR54TZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CCR54TZPL -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CCR49TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CCR49TZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CCR49TZPL
