Features

• Provides protection for instruments or electronics requiring routine attention or detail. 
• Available in light gray solid opaque or polycarbonate thermoplastic clear covers.
• Cover Latching Options – hinged screw cover, tamper proof screw cover, and snap latch with pad lock feature.
• Listed UL component for use with enclosures rated Types 1, 3, 3R, 4, 4X, 12 or 13.
• CSA listed Type 1, 3, 3R, 4, 4X, 12 or 13.
• 316 stainless steel hinge pin.
• UV stabilized for outdoor use.
• Formed-In-Place (FIP) polyurethane gasket in continuous channel.
• Designed for use with wall thicknesses from 16 gauge through 1/4″
• #10-32 threaded brass inserts with plated steel mounting fasteners.
• Service temperature -31°F (-35°C) to 266°F (130°C)

Accessories

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL 508A Type 1, 2, 3, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X, 12 and 13
  • IEC 60529, IP66

Construction

• Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
• Enhanced UV inhibitors protect against outdoor weathering.
• Standard JIC sizes under 18″ x 16″.
• Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
• Stainless steel draw type “snap latch” door fasteners.
• Door fasteners include a provision for padlocking.
• Enclosure available with clear Polycarbonate cover to 16″ x 14″.
• Molded hinge with stainless steel pin.
• Captive oil resistant gasket provides a positive seal.
• Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
• Operating temperatures between 130°C and -40°C (266°F to -40°F).
• Impact index of 6.78J (5 ft/lb).
• For corrosion resistance information, please refer to table in the Technical Information section.

Finish

• Fiberglass polyester material has a gray finish.
• Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.

Accessories

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides outstanding insulation and protection where equipment may be hosed down or be very wet.
• Ideal in applications with high temperatures or highly corrosive environments.

Standards

• UL 508A Type 1, 2, 3, 4, 4X, 12 and 13 (6P for solid covers only)
• CSA Type 1, 2, 3, 4, 4X, 12 and 13 (6P for solid covers only)
• Complies with
  • NEMA Type 1, 2, 3, 4, 4X, 12 and 13 (6P for solid covers only)
  • IEC 60529, IP66 (IP68 for solid covers only)

Construction

• Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
• Enhanced UV inhibitors protect against outdoor weathering.
• Standard JIC sizes under 18″ x 16″.
• Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
• Cover fastened with captive stainless steel screws in threaded brass inserts.
• Enclosure available with clear Polycarbonate cover to 16″ x 14″.
• Captive oil resistant gasket provides a positive seal.
• Available with Polycarbonate flange or foot mount brackets for multi-directional mounting.
• Operating temperatures between 130°C and -40°C (266°F to -40°F).
• Impact index of 6.78J (5 ft/lb).
• For corrosion resistance information, please refer to table in the Technical Information section.

Finish

• Fiberglass polyester material has a gray finish.
• Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.

Accessories

Application

• Designed to insulate and protect controls and components in both indoor and outdoor conditions
• Ideal for industrial pump controls, waste water, irrigation control along with solar/wind and chemical plants

Standards

• UL 508A Type 1, 2, 3, 3R, 4, 4X, 12 and 13
• CSA Type 1, 2, 3, 3R, 4, 4X, 12 and 13
• Complies with
  • NEMA Type 1, 2, 3, 3R, 4, 4X, 12 and 13
  • IEC 60529, IP66 
  • Flammability V-O per UL 94
  • UV rating (f1) per UL746C – UV stabilized for outdoor use
  • Compliant with RoHS directive

Construction

• Injection moulded polycarbonate thermoplastic enclosure with matching cover is easily punched, cut, or drilled
• Enhanced UV inhibitors protect against outdoor weathering
• Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included
• Stainless steel 316 screw  fasteners
• Door fasteners include a provision for padlocking  on Snap Latches
• Enclosure available with clear Polycarbonate cover
• Molded hinge
• Captive oil resistant gasket provides a positive seal
• Available with Polycarbonate flange or foot mount brackets for multi-directional mounting
• Operating temperatures between 130°C and – 35 °C (266°F to – 31 °F)
• Impact index of  16 J (12 ft/lb)
• For corrosion resistance information, please refer to table in the Technical Information section

Finish

• Polycarbonate material has a light gray finish
• Optional inner panels are available in white powder coated finished steel, unfinished aluminum, or fiberglass

Accessories