Showing 146713–146736 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455PPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized Enclosure
Red Anodized Enclosure
Blue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455PPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455NPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455NPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455LPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455LPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455KPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455KPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455JPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455JPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455DPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455DPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455CPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455CPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455BPLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455BPLBK -
Discontinued Products
Extruded Aluminum Enclosures 1455 Series – (1455APLBK) (DISCONTINUED)
Key Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminum with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”
Includes:
- Versions with metal end plates includes two aluminum end panels – finish matched to extruded aluminum body – and two black plastic bezels (your option to install).
- Versions with plastic end plates includes two all-plastic end caps.
- Extruded aluminum body – choice of clear, black, blue or red anodized finish
- Self adhesive rubber feet. Replacements are available – order part number 1421T2CL (pack of 24).
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- For black replacement screws (quantity 100) order part number 1455MS100BK
- For clear replacement screws (quantity 100) order part number 1455MS100
- NOTE: Recommended screw torque is 5 lbf-in
Photo Features:
Black Anodized EnclosureRed Anodized EnclosureBlue Anodized Slimline Enclosure
Most models feature a slide out belly plate. All models include rubber feet.
Accessory panels and bezels allow for mixing and matching of colors.
All models sold as a complete enclosure and feature card slots for easy installation and assembly of PC boards.
Accessories:
Plastic Bezels and End Caps
Extra plastic bezels and end caps are sold in packs of (2) and (10) and are available in black, red, yellow, transparent red, and transparent blue. Refer to the accessory table below to select the part number you need.
Aluminum End Panels
Extra end panels are sold in 10-packs and are available in clear, black, red, or blue anodized finishes. Refer to the accessory table below to select the part number you need.
Flanged End Panel Kit
Flanged end panel kits are sold as a pair (2 panels total) and include black pan head assembly screws. Refer to the accessory table below to select the part number you need.
SKU: 1455APLBK -
Discontinued Products
Watertight – Thick Wall Diecast Aluminum R190-R191 Series – (R191-052-000) (DISCONTINUED)
Discontinued ProductsWatertight – Thick Wall Diecast Aluminum R190-R191 Series – (R191-052-000) (DISCONTINUED)
Key Features:
- Modern, high quality instrument enclosure
- Material – Aluminum die-cast: GD SI 12 / DIN 1725
- Shallow lid, deep body
- Captive stainless steel lid screws
- Enclosure can be mounted after closing lid
- Integrated 1.7 mm recess in lid for membrane keypads and front panels
- Neoprene oil and petrol resistant – thermoplastic gasket standard. (-40ºC up to +120ºC)
- Clip-on design covers – to hide mounting & lid screws (plastic – polyoxymethylene) – grey RAL 7040
- Complete with lid captivation devices
- Degree of protection: NEMA 4X, IP67
- CSA and UL listed, Type 4
- Textured polyester powder coat, grey RAL 7040. (can be supplied unpainted on special order)
Features (click to enlarge)
Enclosure can be installed after closing lid.
Includes optional use lid captivation straps.
Snap in design covers hide both lid screws and installation holes.
Mounting holes accessible with lid closed. All holes outside of gasket seal.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Depth Part Number Width Length (Including Lid) R191-052-000 50 75 33 R191-054-000 50 100 33 R191-070-000 70 100 50 R191-090-000 90 120 60 R191-072-000 70 140 50 R190-110-000 110 140 60 R191-092-000 90 160 60 R190-130-000 130 160 70 R191-074-000 70 180 50 R190-150-000 150 180 60 R191-150-000 150 180 90 R190-112-000 110 200 60 R190-170-000 170 200 60 R191-170-000 170 200 90 R190-132-000 130 220 70 R191-200-100 200 230 120 R191-094-000 90 250 60 R190-152-000 150 260 60 R191-152-000 150 260 90 R190-172-000 170 280 60 R191-172-000 170 280 90 R191-202-100 200 330 120 SKU: R191-052-000 -
Discontinued Products
Water-Tight & EMI/RFI Shielded R110-111 Series – (R501-000-010) (DISCONTINUED)
Key Features:
- Material – Aluminum die-cast: G AI SI 12 / DIN 1775
- Shallow lid, deep body
- Captive stainless steel lid screws
- Neoprene oil and petrol resistant gasket standard. (-40ºC up to +80ºC)
- EMI/RFI gasket is NOT required as lid to box connection is INSIDE the gasket seal. A patented system with special designed “teeth” in the enclosure bottom provide a lasting and corrosion secure shield.
- Degree of protection NEMA 4X, IP66, DIN 40050
- Temperature Range (-40ºC up to +80ºC)
- Separate channel system (outside the seal)
- Special developed external mounting feet made from zinc-die-cast. Can be turned through 90º. The fastening holes have engagement lugs for this purpose. (See accessories)
- All sizes have inner blind holes. A mounting plate made of zinc-plated steel is available
- Textured polyester powder coat, light beige/grey RAL 7032. (can be supplied unpainted on special order)
- CSA certified, Type 4, for use with industrial control equipment
Photo Features
- EMI/RFI enclosure body connection –to lid (see #2 above) is made INSIDE the gasket seal (see #3). This eliminates expensive conducting gaskets and the corrosion problems that can appear later.
- Lid EMI/RFI edge (link here to lid close up) extends into enclosure and contacts “teeth” (see #1 above) in enclosure body for a positive contact.
- Gasket (thermoplastic, forprene, silicon free material) outside of EMI/RFI contact points and inside of lid & mounting holes. No need for expensive conducting gasket (see #1 above).
- Screws and mounting holes outside of gasket seal.
- Internal mounting shelves placed along both sides of enclosure include blind holes and grounding screws. There are many mounting holes for self tapping screws in both the enclosure & the lid. Can also be used for mounting P.C. boards or plates.
- Enclosure holes threaded for easy installation and repetitive assembly & disassembly.
Patented “Conform” Series EMI/RFI Shielding Solution
The patented EV joint provides “metal-to-metal” contact for perfect EM shielding and is protected by the seal from dirt and corrosion. “Teeth” on enclosure bottom, further insure a positive connection. This New EV method eliminates the need for a special conductive gasket or screen (required in the common method).
Accessories (see table below)
External Mounting Feet (for some sizes).
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: mm. Switch units to: inch
Depth Part No. Width Length (Including Lid) Mounting Feet R111-081-000 84 79 44 R501-000-010 R110-081-000 84 79 67 R501-000-010 R111-082-000 84 129 44 R501-000-010 R110-082-000 84 129 67 R501-000-010 R111-083-000 84 179 44 R501-000-010 R110-083-000 84 179 67 R501-000-010 R111-121-000 126 128 60 R501-000-011 R110-121-000 126 128 90 R501-000-011 R111-123-000 126 226 60 R501-000-011 R110-123-000 126 226 90 R501-000-011 R111-161-000 166 166 60 R501-000-012 R110-161-000 166 166 100 R501-000-012 R111-162-000 166 266 66 R501-000-012 R110-162-000 166 266 100 R501-000-012 SKU: R501-000-010 -
Discontinued Products
Type 4X Diecast Aluminum Enclosures R100 Series – (R507-164-000) (DISCONTINUED)
Discontinued ProductsType 4X Diecast Aluminum Enclosures R100 Series – (R507-164-000) (DISCONTINUED)
Key Features:
- Material – Aluminum die-cast: G AI SI 12 / DIN 1775
- Shallow lid, deep body
- Captive stainless steel lid screws
- Neoprene oil and petrol resistant gasket standard. (-40ºC up to +80ºC)
- Degree of protection NEMA 4X, IP66, DIN 40050
- Temperature Range (-40ºC up to +80ºC)
- Single-channel Fastening System
- Special developed external mounting feet made from zinc-die-cast. Can be turned through 90º. The fastening holes have engagement lugs for this purpose. (See accessories)
- All sizes have inner blind holes.
- An inner mounting panel – made of zinc-plated steel is also available (See accessories)
- Textured polyester powder coat, beige RAL7032 or light gray RAL7035. (can be supplied unpainted on special order)
- CSA certified, UL Listed, Type 4, for use with industrial control equipment.
Features
- Lid screws and mounting holes outside of the gasket seal.
- Space saving single channel mounting (ie…same hole used for mounting enclosure through rear and also for the lid), provides larger interior space than dual channel enclosures.
- Captive stainless steel lid screws.
- Enclosure holes threaded for easy installation and repetitive assembly & disassembly.
- Internal mounting shelves placed along both sides of enclosure include blind holes and grounding screws.
Patented Single Channel System
- Provides larger interior space than dual channel enclosures.
- Uses the same enclosure hole for mounting the enclosure and fastening the lid.
Accessories (see table below for compatibility)
External Mounting Feet
Inner Panel
Hinge Kit
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Shallow Lid, Deep Body (R100 Series)
Units shown: mm. Switch units to: inch
Deep Lid, Shallow Body (R101 Series)
Units shown: mm. Switch units to: inch
