Showing 8305–8328 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Footrest S2CF Series – (2CLF48) (DISCONTINUED)
- Generally used in combination with plinth.
- Provides a raised foot support to relieve back stress.
- Gives the installation a “finished” appearance.
- Available in 24″, 36″, 48″ and 60″ widths.
- Maintains NEMA rating of system.
- Formed 14 gauge steel.
- Also offered with formed 14 gauge stainless steel.
- Rubber tread for added traction on footrest surface.
- Available in light gray and natural stainless steel.
SKU: 2CLF48 -
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and Cabinets
Swing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFVD3048UWH)
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and CabinetsSwing-Out Wall Mount and Floor Rack Cabinet HWF Series – (HWFVD3048UWH)
Features
- Available in three (3) heights
- HWF mounts to the wall and sits on the floor supported by levelling feet. The swing-out section is supported by casters.
- Optional doors install in minutes and are available in a vented, tinted window and solid. Order part RHHK1 for right-hand hinge kit.
- The top of the rear section includes a “Bonus” 3U space for optional rack mount fans or accessory mounting.
- The main body can be installed to swing from left-to-right or right-to-left. Includes locking twist-latches.
- Includes one (1) pair of adjustable depth threaded 10-32 EIA compliant mounting rack rails.
- Thirty (30) inch wide mounting rails include “Bonus” 1U space for optional rack accessories, such as cable management or power bars.
- 10-32 tapped rails are easy to remove on-site and replace with square hole rails (sold separately) if needed.
- Includes starter pack of SCREW1032-50 screws and CLPKIT1032-25 clip nuts and screws.
Specifications
- Heavy-duty rear and base are constructed in 14-gauge welded steel.
- Optional locking doors are constructed in 16-gauge steel.
- Swing-out cabinet constructed in 16-gauge welded steel and features a spring-hinge pin for easy installation and removal.
- 2.50” and 2.00” conduit knockouts are located on the side.
- 4.00″, 2.00” conduit knockouts and BNC 0.625” knockouts are located on the top.
- Numerous cable management mounting points are included.
- Heavy-duty keyhole for wall mounting and levelling feet.
- Large openings in the rear for cable access designed for mounting over electrical receptacles.
- Dedicated bonding and grounding points that also provide drill-less mounting of electrical utility boxes. Ground Cable Kit sold separately.
- UL Listed 2416 load rated for up to 700 lbs (317 kg). Static Load tested to 2,800 lbs (1,270 kg).
- Finished in textured RAL9005 black or RAL9003 white powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements, when the door is installed.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: HWFVD3048UWH -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, Unassembled
Test & Measurement Rack Cabinet RCH Series – (RCHV1902831LG1)
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, UnassembledTest & Measurement Rack Cabinet RCH Series – (RCHV1902831LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCHV1902831LG1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, Unassembled
Test & Measurement Rack Cabinet RCH Series – (RCHV1902231LG1)
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, UnassembledTest & Measurement Rack Cabinet RCH Series – (RCHV1902231LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCHV1902231LG1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, Unassembled
Test & Measurement Rack Cabinet RCH Series – (RCHS1902831LG1)
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, UnassembledTest & Measurement Rack Cabinet RCH Series – (RCHS1902831LG1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCHS1902831LG1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, Unassembled
Test & Measurement Rack Cabinet RCH Series – (RCHV1902831BK1)
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, UnassembledTest & Measurement Rack Cabinet RCH Series – (RCHV1902831BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCHV1902831BK1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, Unassembled
Test & Measurement Rack Cabinet RCH Series – (RCHV1902231BK1)
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, UnassembledTest & Measurement Rack Cabinet RCH Series – (RCHV1902231BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCHV1902231BK1 -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, Unassembled
Test & Measurement Rack Cabinet RCH Series – (RCHS1902831BK1)
Hammond, Rack Mounting Solutions, Server Racks and Cabinets, UnassembledTest & Measurement Rack Cabinet RCH Series – (RCHS1902831BK1)
Features:
- Constructed in 16-gauge steel.
- Two pairs of adjustable depth 19″ EIA compliant round hole punched rails.
- Includes rubber feet, two lifting handles, a starter pack of (16) 10-32 clip nuts.
- Simple assembly using one bolt in each corner to lock the sides to the top and bottom (hardware included).
- The front and back lip are .585″ (14 mm) so usable depth is reduced by 1.17″ (30 mm).
- Tested to nearly double the suggested load rating of 800 lbs (363 kg).
- Finished in textured RAL9005 black or RAL 7035 light gray powder paint.
- Knockdown design ships unassembled for easy handling and shipping protection.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
SKU: RCHS1902831BK1 -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Finger Cable Manager with Door FRCM Series – (FRCM44U88)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Finger Cable Manager with Door FRCM Series – (FRCM44U88)
The vertical Fingered Rack Cable Manager (FRCM) from Hammond Mfg can be used for managing sensitive fiber, large bundles of network and coax cables combined into a structurally strong vertical cable manager. The double-hinged/reversible slam-latch door is simple to install and is visually pleasing.
Features:
- Sturdy T-shape steel high-density fingers are spaced at 2RU and provide support for large cable bundles and heavy gauge cables.
- Separated space easily allows for cables to be added or removed without fishing the cable.
- Includes clip-on plastic finger guards (ships loose) for 1.25in cable bend radius.
- The Slam-latch door is reversible and can be opened from either side or removed with ease.
- Includes mounting provisions for optional Cable Spools, dividers for slack management.
- Also includes mounting for up to eight (8) low-density rear management rings.
- Hardware included for securing to rack.
Specifications:
- The manager body is constructed of 16-gauge steel while manager door is constructed of 18-gauge steel.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Looking for a double-sided manager? Check out the VFM Series.
SKU: FRCM44U88 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (C2DF1978PBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C2DF1978PBK1 -
Discontinued Products
Hygienic Type 4X Stainless Steel Junction Box HYJ Series – (HYJ1074SS) (DISCONTINUED)
Discontinued ProductsHygienic Type 4X Stainless Steel Junction Box HYJ Series – (HYJ1074SS) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, hygienic environments for junction box and wallmount applications.
- Sloped on 4 sides prevent water from resting on top regardless of enclosure orientation.
- Hex head design screws and door-edge mounted silicone gasket allow for easy cleaning in hose-down environments.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 3R, 12, 4, 4X
- CSA Type 3R, 12, 4, 4X
- NSF – ANSI 169
- Not all accessories shown maintain NSF standard. Some are internal and NSF is not applicable. Refer to each accessory individually or call factory for specifics.
- Complies with
- NEMA 3R, 12, 4, 4X
- IEC 60529, IP69, IP69K
Construction
- Formed 304 stainless steel.
- Sloped 3° on all 4 sides
- Continuously welded seams ground smooth.
- Hex head screw cover can be completely removed for modifications.
- Silicone gasket mounts around entire door edge allowing for efficient cleaning in hygienic environments.
- Gasket can be easily removed and re-installed for cleaning or replacement. Additional silicone gaskets can be ordered separately.
- Studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts.
- No pre-drilled wall mounting holes allow for flexible mounting alternatives – weld-in-place, stand-offs
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with a smooth #4 dairy finish.
Gallery
Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Enclosure Optional Inner Panel Replacement Part No. H W D Part No. H W Gasket HYJ854SS 7.94 4.88 4.00 14R0503 4.88 2.88 HYG85 HYJ1074SS 9.94 6.88 4.00 14R0705 6.75 4.88 HYG107 HYJ1294SS 11.94 8.88 4.00 14R0907 8.75 6.88 HYG129 HYJ14116SS 14.15 11.09 6.00 14R1109 10.75 8.88 HYG1411 HYJ16138SS 16.36 13.30 8.00 14R1311 12.75 10.88 HYG1613 SKU: HYJ1074SS -
Fiber Optic Enclosures, Fiber Optics, General Enclosures
(Part – PCH02U) – Corning® Connector Housing Pretium® PCH 2 Rack Units Holds (4) CCH Connector Panels Unloaded Gray – Fiber Optic Enclosures –
Fiber Optic Enclosures, Fiber Optics, General Enclosures(Part – PCH02U) – Corning® Connector Housing Pretium® PCH 2 Rack Units Holds (4) CCH Connector Panels Unloaded Gray – Fiber Optic Enclosures –
Fiber optic enclosures are protective housings designed to securely organize, splice, and terminate fiber optic cables in both indoor and outdoor environments. They safeguard delicate fiber connections from environmental factors such as moisture, dust, and physical damage while maintaining optimal signal performance.
Commonly used in telecommunications networks, data centers, and outside plant (OSP) installations, these enclosures come in various types-including wall-mount, rack-mount, and underground splice closures-to support efficient cable management, scalability, and long-term network reliability.SKU: PCH02U -
Discontinued Products
Type 4/3R Mild Steel Splitter Trough CN4ST Series – (CN4ST2103) (DISCONTINUED)
Application
- The splitter troughs are designed for distribution of up to 600 A (max) service using either 3 or 4 wires. 75° C conductor ampacity permitted.
Standards
- CSA Certified Type 3R, 12, 4
- Complies with
- IEC 60529, IP66
Construction
- Formed and spot welded from 16 gauge steel. When width is 8″ or more, 14 gauge.
- Factory installed splitter blocks.
- Smooth, continuously welded seams ground smooth.
- Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
- Doors may be easily removed for modifications and are interchangeable.
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Hinges are constructed from 304 stainless steel.
- Hinge pins are stainless steel.
- Inner panel is included.
Finish
- Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
- Inner panel is finished in white powder coating.
Accessories
Quarter Turn Inserts and Keys
Mounting Foot Kit
Rear Hole Plugs
Replacement Hinge Pins
Quarter Turn Assemblies
Padlock Adaptor
Splitter Blocks
Grounding Kits
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
