Application

• The splitter boxes are designed for distribution of up to 600 A (max) service using either 3 or 4 wires. 75° C conductor ampacity permitted.

Standards

• CSA Type 3R, 12, 4
• Complies with
  • IEC 60529, IP66

Construction

• Formed 16 gauge steel (14 gauge on 30×24)
• Factory installed splitter blocks.
• Smooth, continuously welded seams ground smooth.
• Door stiffeners are provided where required for increased strength and rigidity – designed to also permit additional mounting options.
• Formed lip on enclosure to exclude flowing liquids and contaminants.
• Door latches feature the added safety of quarter turn slot requiring use of tool for opening.
• Doors may be easily removed for modifications and are interchangeable.
• Seamless poured-in place gasket.
• Collar studs provided for mounting inner panel.
• Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
• Hinges are constructed from 304 stainless steel.
• Hinge pins are stainless steel.
• Inner panel is included.

Finish

• Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating.
• Inner panel is finished in white powder coating.

Accessories

Application

Application  

• Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
• Ideal for connecting machines to control panels or power sources.

Standards

• UL 870 Type 1 (unless marked¹)
• CSA Type 1 (unless marked¹)
• Complies with
  • NEMA Type 4, 4X and 12
  • IEC 60529, IP66

Construction

• Bodies and covers are formed from 14 gauge 304 stainless steel with 10 gauge flanges.
• Continuous flange around wireway ends, requires cables to be pulled through. 
• Smooth continuously welded seams.
• Interior surfaces are smooth to prevent wire damage during installation.
• Butt hinged covers are secured with easily operated screw clamps.
• Oil resistant gaskets are permanently secured.
• Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
• One gasket kit, complete with hardware is provided with each straight section or fitting.

Finish

• Sections and fittings are natural stainless steel with a smooth brushed finish.

Accessories

Application

• Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures.
• Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion may be a problem.

Standards

• UL 508A Type 4, 4X, 12 and 13
• CSA Type 4, 4X, 12 and 13
• Complies with
  • NEMA Type 4, 4X, 12 and 13
  • IEC 60529, IP66

Construction

• Formed from 0.081″ (Body) / 0.100″ (Door) Type 5052 H-32 aluminum.
• Smooth, continuously welded seams without knockouts, cutouts or holes.
• Door and body stiffeners are provided in the larger enclosures for extra rigidity.
• Welded brackets provide for enclosure mounting.
• Formed lip on door and enclosure excludes flowing liquids and contaminants.
• Aluminum continuous hinge on door may be removed by pulling the alum­inum hinge pin.
• Door is secured with easily operated aluminum clamps.
• Provision for padlocking.
• Seamless poured-in place gasket.
• A removable 12 gauge steel inner panel is included.
• Collar studs are provided for mount­ing inner panels.
• A bonding stud is provided on the door and a grounding stud is provided in the enclosure.
• A literature pocket is provided for the inside of the door.

Finish

• Cover and enclosure are natural unfinished aluminum.
• Removable inner panel is finished in white powder coating.

Accessories