• Front and rear solid doors include an installed gland plate for cooling options. Doors open to 135°. Window door option available.
• Reinforced top panel with provisions for optional HDMELB lifting eye bolts.
• Frames can be joined together with an optional joining kit.
• A black, cellular neoprene gasket provides tight and secure seal protection from moisture, dust and air contaminants.
• Available in 42U and 47U mounting heights.
• Available 24″ wide. 31.5″ is available as a special order.
• Available in 31.5″ and 39.37″ overall depths.
• Includes adjustable depth mount rails.

Specifications

• Cabinet frame, doors and side panels are constructed in 14-gauge steel.
• Square hole 19″ mounting rails are constructed in 12-gauge steel, include rack unit indicators, and are Zinc-plated to provide superior surface areas for equipment grounding.
• Tested to nearly double the suggested load rating of 1,500 lbs (680 kg).
• NEMA Rated for UL 508A Type 12 and CSA Type 12. Complies with NEMA Type 12 and IEC 60529 IP54.
• Lift-tested to 900 lbs (408 kg) when used with our HDMELB lifting eye bolts.
• Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
• Finished in textured RAL9005 black powder paint. Also available in textured light gray upon request.
• Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
• TAA-compliant for GSA Schedule purchases.
• RoHS Compliant.
• Manufactured in North America within an ISO 9001:2015 certified facility.

Included Components

• Welded steel frame with factory-installed nylon levelling feet, ground studs, and mounting points for optional casters.
• Two (2) pairs of adjustable depth EIA compliant square hole punched mounting rails.
• Two (2) solid removable side panels.
• Two (2) solid doors with
  • one (1) installed gland plate
  • one (1) die-cast locking swing handle
  • Two (2) door keys
• One (1) solid top panel.
• Two (2) bottom panels with gland plates
• Four (4) levelling feet
• Starter pack of CAGKIT1032-50 screws

Videos

Accessories

• Climate Control
• Tamper Resistant Screws
• Frame Joining Kit
• Rack and Cabinet Stem Casters
• 10-32 Mounting Hardware
• Universal Rack Shelf
• Rack Mount Locking Storage Drawer
• Adjustable Depth Shelf
• Power Distribution Units (PDUs)
• Vertical Cable Tray
• Bonding Wire Kits
• Copper Bonding Busbar
• Rack Panels
• Liquid-Tight Cordgrips (Nylon)

• Molded fiberglass polyester enclosure with matching cover is easily punched, cut, or drilled.
• Enhanced UV inhibitors protect against outdoor weathering.
• Standard JIC sizes under 18″x16″.
• Threaded brass inserts are provided for optional inner panel or terminal kit mounting. Mounting hardware is included.
• Stainless steel draw type “snap latch” door fasteners.
• Door fasteners include a provision for padlocking.
• Enclosures are available with bonded polycarbonate viewing windows.
• Door is supported with a continuous stainless steel hinge.
• Captive oil resistant gasket provides a positive seal.
• Threaded brass inserts are provided for mounting feet to the rear of the enclosure.
• Stainless steel mounting brackets and hardware are provided for mounting to the rear of the enclosure.
• Operating temperatures between 130°C and -40°C (266°F to -40°F).
• Impact index of 6.78J (5 ft/lb).
• For corrosion resistance information, please refer to table in the Technical Information section.

Finish

• Fiberglass polyester material has a gray finish.
• Optional inner panels are available in white powder coated finished steel or unfinished aluminum, or Fiberglass.

Accessories

• Additional Inner Panels
• Terminal Kit Assemblies
• Pole Mounting Kit
• PJ/PJU/PCJ Replacement Hardware Kits
• PJ Stainless Replacement Mounting Feet
• Climate Control
• General Accessories

• A perfect match to our 1650P potted output transformers.
• Enclosed in a drawn steel case, the transformer is completely potted in epoxy.
• Mounting hardware included.
• Primary: Universal – 100, 110, 120, 200, 220, 240 VAC 50/60 Hz.
• Bias Tap: 50 VAC tap from high voltage secondary C.T.
• Highpot tested: 2,000 VAC
• Faraday Copper Primary Shield: Our electrostatic shield reduces the capacitive coupling from the primary – greatly attenuating higher frequency current coupling to the secondaries (shield is internally grounded to the end bell).
• Windings: Concentric wound for low stray field and low noise
• Finish: Black powder paint to match our 1650P series of potted output transformers
• Units can be run full wave bridge or full wave C.T.
• c UL us recognized (E207860)

Gallery

• Exhaust Filters
• Replacement Filters
• Filterfan Rainhoods – 4/4X
• Filterfan Rainhoods – 3R
• Thermostats