Showing 6097–6120 of 151203 resultsSorted by price: high to low
-
Discontinued Products
Type 4X Pull Through Wireway 1487SS Series – (1487C120SS) (DISCONTINUED)
Application
- Designed to enclose and protect electrical wiring from dirt, dust, oil and water.
- Ideal for connecting machines to control panels or power sources.
Standards
- UL 870 Type 1 (unless marked¹)
- CSA Type 1 (unless marked¹)
- Complies with
- NEMA Type 4, 4X and 12
- IEC 60529, IP66
Construction
- Bodies and covers are formed from 14 gauge 304 stainless steel with 10 gauge flanges.
- Continuous flange around wireway ends, requires cables to be pulled through.
- Smooth continuously welded seams.
- Interior surfaces are smooth to prevent wire damage during installation.
- Butt hinged covers are secured with easily operated screw clamps.
- Oil resistant gaskets are permanently secured.
- Solid oil resistant gaskets are used between flanges when sections and fittings are bolted together.
- One gasket kit, complete with hardware is provided with each straight section or fitting.
Finish
- Sections and fittings are natural stainless steel with a smooth brushed finish.
Accessories
SKU: 1487C120SS -
Discontinued Products
(Discontinued) Fold Down Shelf – (FDS2424S16)
Features
- Supports various equipment used temporarily to service/program switchgear inside enclosures.
- Mounts with bolts through doors or sides.
- Supports up to 100 lbs weight capacity.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
Work Surface Part No. Finish W D FDS1212GY ANSI 61 Gray 12.00 12.00 FDS1818GY ANSI 61 Gray 18.00 18.00 FDS2424GY ANSI 61 Gray 24.00 24.00 FDS1212LG RAL 7035 Light Gray 12.00 12.00 FDS1818LG RAL 7035 Light Gray 18.00 18.00 FDS2424LG RAL 7035 Light Gray 24.00 24.00 FDS1212S16 316 Stainless Steel 12.00 12.00 FDS1818S16 316 Stainless Steel 18.00 18.00 FDS2424S16 316 Stainless Steel 24.00 24.00 SKU: FDS2424S16 -
Discontinued Products
Type 12 Mild Steel Two Door Wallmount Enclosure Eclipse Series – (EN4TD306010GY) (DISCONTINUED)
Discontinued ProductsType 12 Mild Steel Two Door Wallmount Enclosure Eclipse Series – (EN4TD306010GY) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Impressive styling features like hidden hinges, attractive latching systems make the Eclipse a suitable addition to any high-tech equipment installation.
- A wide range of sizes and practical accessories make this product line a complete package.
Standards
- UL 508A Type 12, 3R unless marked¹
- CSA Type 12, 3R
- Complies with
- NEMA 12, 3R
- IEC 60529, IP54
Construction
- Formed 14 gauge steel.
- Smooth, continuously welded seams ground smooth.
- Door stiffeners are provided for increased strength and rigidity also designed to permit additional mounting options.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- Doors may be easily removed for modifications and are interchangeable.
- Oil resistant gaskets are permanently secured.
- Collar studs provided for mounting inner panel.
- Includes hardware kit with panel mounting nuts and sealing washers for wall mounting holes.
- Bonding stud provided on door and grounding stud installed in enclosure.
- Doors are secured with a three point key lockable handle.
- Hinges are constructed from 304 stainless steel.
- Key lockable handle is zinc diecast with black epoxy finish.
- Hinge pins are stainless steel.
- Door alignment guides provided on all doors.
Finish
- Cover and enclosure are phosphatized and finished with a recoatable powder inside and out with choice of ANSI 61 smooth Gray (GY) or RAL7035 textured light gray (LG).
Accessories
Additional Inner Panels
Eclipse DIN Rail Mounting Kit
Eclipse DIN Rails
Door Stop Kit
Mounting Foot Kit
Rear Hole Plugs
Drip Shield Kit
Handles
Replacement Hinge Pins
Window Kits
Climate Control
Lighting
General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
ANSI 61 Gray RAL7035 Light Gray Overall Dimensions Optional Inner. Panel Part No. Part No. H W D Part No. H W EN4TD24428GY EN4TD24428LG 24.00 42.00 8.00 EP2442 22.20 40.20 EN4TD24488GY EN4TD24488LG 24.00 48.00 8.00 EP2448 22.20 46.20 EN4TD30488GY EN4TD30488LG 30.00 48.00 8.00 EP3048 28.20 46.20 EN4TD244210GY EN4TD244210LG 24.00 42.00 10.00 EP2442 22.20 40.20 EN4TD304210GY EN4TD304210LG 30.00 42.00 10.00 EP3042 28.20 40.20 EN4TD304810GY EN4TD304810LG 30.00 48.00 10.00 EP3048 28.20 46.20 EN4TD306010GY EN4TD306010LG 30.00 60.00 10.00 EP3060 28.20 58.20 EN4TD306012GY EN4TD306012LG 30.00 60.00 12.00 EP3060 28.20 58.20 EN4TD364212GY EN4TD364212LG 36.00 42.00 12.00 EP3642 34.20 42.20 EN4TD364812GY EN4TD364812LG 36.00 48.00 12.00 EP3648 34.20 46.20 EN4TD366012GY EN4TD366012LG 36.00 60.00 12.00 EP3660 34.20 58.20 EN4TD484812GY¹ EN4TD484812LG¹ 48.00 48.00 12.00 EP4848 46.20 46.20 SKU: EN4TD306010GY -
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and Cabinets
Swing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2412U20WDBK)
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and CabinetsSwing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2412U20WDBK)
Features
- Available in two (2) depths and four (4) heights.
- All sizes include either vented 63% perforated front door or smoked window front door.
- Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
- Starter pack of SCREW1032-50 screws.
- Center section features:
- Heavy-duty spring-hinge pin for easy installation and removal.
- Sides that include two (2) vents and a fan grill.
- Can be installed to swing from left-to-right or right-to-left.
- Rear section features:
- The side of the rear section includes 2.50” and 2.00” knockouts.
- The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
- Generous cable management lances are located on the rear section as well as on mounting rails.
- Mounting points for outlet strips.
- Heavy-duty keyhole for wall mounting.
- Large opening in the rear for cable access.
- The front locking door and center section keyed the same (optional key available).
Specifications
- 14-gauge welded rear section; 16-gauge center section and doors.
- EIA compliant adjustable depth mounting rails.
- Grounding lugs located on top and bottom of the door, center and rear sections.
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.
Videos
SKU: HWM2412U20WDBK -
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and Cabinets
Swing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2412U26BK)
Hammond, Rack Mounting Solutions, Wall Mount Cabinets, Wall Mount Racks and CabinetsSwing-Out Sectional Wall Mount Rack Cabinet HWM Series – (HWM2412U26BK)
Features
- Available in two (2) depths and four (4) heights.
- All sizes include either vented 63% perforated front door or smoked window front door.
- Includes one (1) pair of 10-32 threaded rack rails with support for additional optional rails (see accessory table).
- Starter pack of SCREW1032-50 screws.
- Center section features:
- Heavy-duty spring-hinge pin for easy installation and removal.
- Sides that include two (2) vents and a fan grill.
- Can be installed to swing from left-to-right or right-to-left.
- Rear section features:
- The side of the rear section includes 2.50” and 2.00” knockouts.
- The top and bottom of the rear section include 3.00″, 2.00”, 1.38” and 1.12” knockouts.
- Generous cable management lances are located on the rear section as well as on mounting rails.
- Mounting points for outlet strips.
- Heavy-duty keyhole for wall mounting.
- Large opening in the rear for cable access.
- The front locking door and center section keyed the same (optional key available).
Specifications
- 14-gauge welded rear section; 16-gauge center section and doors.
- EIA compliant adjustable depth mounting rails.
- Grounding lugs located on top and bottom of the door, center and rear sections.
- UL Listed 2416 load rated for up to 350 lbs (158 kg). Static Load tested to 1,400 lbs (635 kg).
- Rugged sand-textured black powder paint reduces the look of fingerprints and marks.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Upgrade the cabinet to be dust-resistant with the HWCF Cabinet Sealing and Filter Kit.
Videos
SKU: HWM2412U26BK -
Discontinued Products
Type 4X Stainless Steel Wallmount Enclosure HWSSHK Series – (HW242010SSHK) (DISCONTINUED)
Discontinued ProductsType 4X Stainless Steel Wallmount Enclosure HWSSHK Series – (HW242010SSHK) (DISCONTINUED)
Application
- Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments for wallmount applications.
- Provides high level of protection where equipment is hosed down or otherwise be exposed to wet conditions where corrosion is a serious problem.
- Ideal for processing plants, utility, outdoor municipal or petro chemical locations where easy yet secure access is required.
Standards
- UL 508A Type 3R, 4, 4X and 12
- CSA Type 3R, 4, 4X and 12
- Complies with
- NEMA 3R, 4, 4X, 12 and 13
- IEC 60529, IP 66
Construction
- Formed 14 gauge 304 or 316 stainless steel.
- Continuously welded seams ground smooth.
- Formed lip on enclosure to exclude flowing liquids and contaminants.
- 316 Stainless pad lockable handle with 3 point roller latching system secures door.
- Stainless steel continuous hinge on door may be removed by pulling the stainless steel hinge pin
- Seamless poured-in place gasket.
- Collar studs provided for mounting inner panel.
- Bonding stud provided on door and grounding stud installed in enclosure.
Finish
- Cover and enclosure are natural stainless steel with smooth brushed finish.
Videos
Accessories
Additional Inner Panels
Perforated Inner Panels
Type 12/4, 4X Handle Kits
Swing Panel Kit- Door Stop Kit
- Drip Shield Kit
Floor Stand Kit- Window Kits
- Climate Control
- Lighting
- General Accessories
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
Units shown: inch. Switch units to: mm
