Hammond
Showing 481–504 of 1350 resultsSorted by price: high to low
-
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Variable Depth Shelf DNRM Series – (DNRMV23BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Variable Depth Shelf DNRM Series – (DNRMV23BK1)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
- Constructed of heavy-duty 16 gauge steel.
- Choice of 19″ or 24″ deep (19″ deep shown).
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips folded for extra strength & become equipment retainers.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 300 lbs (136 kg).
- For a similar design rated for 550 lbs (227 kg), see the BRS Series.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNRMV23BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
10-32 Tapped Mounting Rail CLTR Series – (CLTR44U)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions10-32 Tapped Mounting Rail CLTR Series – (CLTR44U)
Features:
- Constructed in 12-gauge steel
- Sold in pairs
- EIA compliant drilled and tapped 10-32 holes
- Rails come numbered in 1U (1.75″) increments.
- Bolts vertically in rack to amhal struts.
- Use with CLC Series Cabinets.
- Include mounting hardware for installation in cabinet.
- Rails are compatible for 19″ and 23″ rack mounting where applicable.
- Finished in smooth black powder paint.
SKU: CLTR44U -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CCR63TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CCR63TZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CCR63TZPL -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Manager with Door C4VCM Series – (C4VFM42UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Manager with Door C4VCM Series – (C4VFM42UBK)
Features
- Constructed in 16-Gauge Steel.
- Formed cable manager’s body with the door.
- Mounts vertically inside Hammond rack cabinets.
- Available in three heights.
- Designed to work with our C4 and DCZ4 cabinet series.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C4VFM42UBK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails C4PR Series – (C4PR2477TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails C4PR Series – (C4PR2477TZPL)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in cabinet.
- Use with C4 and C4RR Cabinet series.
- Includes strut mounting hardware (for both rails).
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
10-32 Tapped Rail Features
- Constructed in 10-gauge steel
- EIA compliant drilled and tapped 10-32 holes
Square Hole Punched Rail Features
- Constructed in 12-gauge steel
- EIA compliant square hole punched (allows choice of cage nuts for 10-32, https://ats-staging.hikmsystems.com/product/c4pr2442szpl/, 1/4-20 or M6 cage nuts).
SKU: C4PR2477TZPL -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails C4PR Series – (C4PR2473TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails C4PR Series – (C4PR2473TZPL)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in cabinet.
- Use with C4 and C4RR Cabinet series.
- Includes strut mounting hardware (for both rails).
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
10-32 Tapped Rail Features
- Constructed in 10-gauge steel
- EIA compliant drilled and tapped 10-32 holes
Square Hole Punched Rail Features
- Constructed in 12-gauge steel
- EIA compliant square hole punched (allows choice of cage nuts for 10-32, https://ats-staging.hikmsystems.com/product/c4pr2442szpl/, 1/4-20 or M6 cage nuts).
SKU: C4PR2473TZPL -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Heavy Duty Battery Shelf BRS Series – (BRS2P1924BK)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Heavy Duty Battery Shelf BRS Series – (BRS2P1924BK)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks.
- Constructed of heavy-duty 12-gauge steel.
- Use to support heavy chassis or batteries for DC battery array.
- Choice of 19-inch or 24-inch deep.
- The front and rear lips are folded and welded for extra strength and liquid retainer.
- For a similar design that is light-duty and vented, see the DNRM Series.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 550 lbs (250 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
19 Inch Rack Mounting Shelf
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height Width Depth BRS2P1919BK 3U 5.25 19.00 19.00 BRS2P1924BK 3U 5.25 19.00 24.00 23 Inch Rack Mounting Shelf
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height Width Depth BRS2P2319BK 3U 5.25 23.00 19.00 BRS2P2324BK 3U 5.25 23.00 24.00 What’s Inside the Box
Qty Included Description Replacement Part No. 1 Rack Shelf 4 Rack mounting brackets 1 Assembly Instructions 8 10-32 Keps nut 16 10-32 x 0.5in Assembly screws 8 12-24 x 0.5in Screws SKU: BRS2P1924BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMSPWH)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMSPWH)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMSPWH -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
High-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMSPBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsHigh-Density Vertical Finger Manager with Slam-Latching Door VFM Series – (VFMSPBK)
Features
- Sturdy, reversible steel slam-latch door/cover with pinch-trigger handle included.
- Available in 6”, 8”, 10” or 12” widths.
- Metal finger features sturdy T-shape steel fingers are spaced at 2RU and provide support for high-density cable bundles and heavy gauge cables. Includes clip-on plastic finger guards (shipped loose) for cable 1.25” bend radius.
- Each manager comes with two openings for cable pass-thru.
- Includes cable mounting lances for hook and loop cable organization.
- Compatible with Hammond DNRRHDW, DC4R, DRZ4, RB-2P and RB-2PA Series of open frame racks.
- Use the optional riser base VFMB2BK for easier installation and manager support.
- We strongly recommend you use our rack bolt-down kit when mounting large cable managers.
- Optional inner and side panel, spool and cable divider accessories available.
- Finished in a textured black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: VFMSPBK -
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting Solutions
Grounding Bar and Bus Bars BUSBAR Series – (BUSBAR2X10)
Grounding & Bonding, Hammond, Rack Accessories, Rack Mounting SolutionsGrounding Bar and Bus Bars BUSBAR Series – (BUSBAR2X10)
Features
- Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
- The thin tin coating acts as a shield, inhibiting copper oxidization.
- Copper oxidization causes a poor electrical contact which then gets hot and increases the copper oxidization rate.
- Oxides, because of their poor conductivity, also cause arcing at the electrical contacts, eroding the copper.
- 3200 Volt rated Glass-Reinforced Thermoset Polyester insulators
- 180+ seconds of arc resistance
- UL 94 V0 flame resistance
- Mounting bracket holes 0.375” diameter
- Busbar available in 2” or 4” widths
- 10” in length
- 0.25” in thickness
- Hardware:
- ¼-20 x 0.75” length stainless steel Phillips machine screw (12 pcs.)
- ¼ stainless steel lock washer (12 pcs.)
- ¼-20 stainless steel hex nut (12 pcs.)
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: BUSBAR2X10 - Electro Tin Plated Copper Bus Bar, 100/300 micro inches of plating.
-
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Ring CMRC Series – (CMRC36BK1)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Ring CMRC Series – (CMRC36BK1)
Features:
- Constructed of steel.
- Designed to mount to ganging holes located on most Hammond Open Frame Racks.
- Mounting holes are approx. 1.25″ apart.
- Can also be used as an open vertical cable manager between two racks.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Add to FRCM for low-density rear cable management.
SKU: CMRC36BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CPR78SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CPR78SZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CPR78SZPL -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails H1R Series – (H1SRR24U24BK)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails H1R Series – (H1SRR24U24BK)
Features
- Sold in pairs
- Rails come numbered in 1U (1.75″) increments.
- Installs vertically in the cabinet.
- Use with H1, RCK, HWF Cabinet series.
- Includes strut mounting hardware (for both rails).
- Rails are compatible for 19″ rack mounting.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
10-32 Threaded Rail Features
- Constructed in 12-gauge steel.
- EIA compliant threaded 10-32 holes.
Square Hole Punched Rail Features
- Constructed in 12-gauge steel.
- EIA compliant square hole punched.
SKU: H1SRR24U24BK -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Variable Depth Shelf DNRM Series – (DNRMV19BK1)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Variable Depth Shelf DNRM Series – (DNRMV19BK1)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks or any 2 post rack.
- Constructed of heavy-duty 16 gauge steel.
- Choice of 19″ or 24″ deep (19″ deep shown).
- The vented version provides a sturdy shelf without obstructing upward heat movement.
- The front and rear lips folded for extra strength & become equipment retainers.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 300 lbs (136 kg).
- For a similar design rated for 550 lbs (227 kg), see the BRS Series.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: DNRMV19BK1 -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CCR56TZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CCR56TZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CCR56TZPL -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Two Post Heavy Duty Battery Shelf BRS Series – (BRS2P2319BK)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesTwo Post Heavy Duty Battery Shelf BRS Series – (BRS2P2319BK)
Features
- Designed for use with our heavy-duty DNRR and DRZ4 double-tapped two (2) post racks.
- Constructed of heavy-duty 12-gauge steel.
- Use to support heavy chassis or batteries for DC battery array.
- Choice of 19-inch or 24-inch deep.
- The front and rear lips are folded and welded for extra strength and liquid retainer.
- For a similar design that is light-duty and vented, see the DNRM Series.
- Finished in textured RAL9005 black powder paint.
- Tested to nearly double the suggested load rating of 550 lbs (250 kg).
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
Part Details
Click Part No, below, for details (e.g., Product drawings, assembly instructions, ship weight)
19 Inch Rack Mounting Shelf
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height Width Depth BRS2P1919BK 3U 5.25 19.00 19.00 BRS2P1924BK 3U 5.25 19.00 24.00 23 Inch Rack Mounting Shelf
Units shown: inch. Switch units to: mm
Part No. Mounting Dimensions Rack Units Height Width Depth BRS2P2319BK 3U 5.25 23.00 19.00 BRS2P2324BK 3U 5.25 23.00 24.00 What’s Inside the Box
Qty Included Description Replacement Part No. 1 Rack Shelf 4 Rack mounting brackets 1 Assembly Instructions 8 10-32 Keps nut 16 10-32 x 0.5in Assembly screws 8 12-24 x 0.5in Screws SKU: BRS2P2319BK -
Hammond, Mounting Rails, Rack Accessories, Rack Mounting Solutions
Mounting Rack Rails CCR Series – (CPR77SZPL)
Hammond, Mounting Rails, Rack Accessories, Rack Mounting SolutionsMounting Rack Rails CCR Series – (CPR77SZPL)
Features:
- Constructed in 10-gauge steel
- Sold in pairs
- EIA compliant mounting rails:
- Drilled and tapped 10-32 holes (CCR)
- Square hole punched for cage nuts (CPR)
- Rails come stamped and numbered in 1U (1.75″) increments.
- Combination front and side of rail mounting provides the ability to affix rack mounted and fixed accessories.
Note this mounting location prevents the installation of server rail slides. - Bolts vertically in cabinets.
- Compatible with C2 and REFK cabinets.
- Strut mounting hardware included. Rack mounting hardware sold separately.
- Finished in Zinc steel plate.
- TAA compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: CPR77SZPL -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Adjustable Depth Shelf ADS Series – (ADSV1825BK)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesAdjustable Depth Shelf ADS Series – (ADSV1825BK)
Features
- Constructed of 14-Gauge Steel.
- Telescoping design provides three (3) usable depths.
- Fits within a single EIA rack unit and telescopes to cover the entire depth.
- Available in both solid and vented.
- Choose the vented option to allow for airflow and/or cable management tie points.
- Ships fully assembled.
- Mounts to 4 post frame/rack
- Shelf load capacity is noted in the table below.
- Optional ADSB support bar increases load capacity up to 550 lbs (250 kg).
- 36-42 inch depth option rated for 450 lbs (204 kg) with ADSB installed.
- Finished in RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: ADSV1825BK -
Hammond, Rack Accessories, Rack Mounting Solutions, Rack Shelves
Adjustable Depth Shelf ADS Series – (ADSU1825BK)
Hammond, Rack Accessories, Rack Mounting Solutions, Rack ShelvesAdjustable Depth Shelf ADS Series – (ADSU1825BK)
Features
- Constructed of 14-Gauge Steel.
- Telescoping design provides three (3) usable depths.
- Fits within a single EIA rack unit and telescopes to cover the entire depth.
- Available in both solid and vented.
- Choose the vented option to allow for airflow and/or cable management tie points.
- Ships fully assembled.
- Mounts to 4 post frame/rack
- Shelf load capacity is noted in the table below.
- Optional ADSB support bar increases load capacity up to 550 lbs (250 kg).
- 36-42 inch depth option rated for 450 lbs (204 kg) with ADSB installed.
- Finished in RAL9005 black powder paint.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: ADSU1825BK
