Hammond
Showing 241–264 of 1350 resultsSorted by price: high to low
-
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
HWC Locking Door HWCD Series – (HWCWD3018UBK)
Doors, Hammond, Rack Accessories, Rack Mounting SolutionsHWC Locking Door HWCD Series – (HWCWD3018UBK)
Features:
- 16-gauge steel construction.
- Door styles available solid, tinted acrylic with venting, 64% airflow vented.
- For use with the Hammond HWC Series.
- In addition, the hinges can be mounted on the left or right.
- Includes snap-latch lock and two keys.
- Includes door mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HWCWD3018UBK -
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Rack Mount Fan Tray FT Series – (FT600HA1220BK)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsRack Mount Fan Tray FT Series – (FT600HA1220BK)
Features
- Standard 19″ rack mount
- Compact and economical rack cooling solution.
- Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
- Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
- Circuit breaker protected
- Low profile 1.75″ (1U) of panel space
- 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
- 220VAC versions include an IEC input receptacle (IEC320-C14)
- Integral finger guards above and below fans
- Case width is 17″
- 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
- Shipped fully assembled
- Available with or without on/off switch
- Finished in textured black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: FT600HA1220BK -
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting Solutions
Rack Mount Fan Tray FT Series – (FT600TA1220BK)
Equipment Cooling, Hammond, Rack Accessories, Rack Mounting SolutionsRack Mount Fan Tray FT Series – (FT600TA1220BK)
Features
- Standard 19″ rack mount
- Compact and economical rack cooling solution.
- Fan trays can be positioned at the bottom of a rack to force air through the cabinet, at the top to exhaust air out or below specific pieces of equipment for spot cooling
- Choice of two operating voltages 115VAC (or 220VAC) – both 50/60 Hz., thermally protected, ball bearing fans
- Circuit breaker protected
- Low profile 1.75″ (1U) of panel space
- 115VAC versions include a 6′ 14/3 STJW cord with moulded 3 prong plug (NEMA 5-15P)
- 220VAC versions include an IEC input receptacle (IEC320-C14)
- Integral finger guards above and below fans
- Case width is 17″
- 6 and 9 fan units include an adjustable rear mounting bracket (mounts to rear panel rails) for extra stability
- Shipped fully assembled
- Available with or without on/off switch
- Finished in textured black powder paint
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
SKU: FT600TA1220BK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Finger Cable Manager with Door H1VFM Series – (H1VFMC3048UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Finger Cable Manager with Door H1VFM Series – (H1VFMC3048UBK)
Features
- Constructed in 16-Gauge Steel.
- Formed plastic fingers with a removable aluminum door.
- Mounts to mounting rails vertically inside Hammond H1 rack cabinets.
- Available in three widths.
- Designed to work with our H1 cabinet series.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: H1VFMC3048UBK -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1931F4TLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1931F4TLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1931F4TLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1931F4TBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1931F4TBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1931F4TBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
HWC Locking Door HWCD Series – (HWCVD3027UBK)
Doors, Hammond, Rack Accessories, Rack Mounting SolutionsHWC Locking Door HWCD Series – (HWCVD3027UBK)
Features:
- 16-gauge steel construction.
- Door styles available solid, tinted acrylic with venting, 64% airflow vented.
- For use with the Hammond HWC Series.
- In addition, the hinges can be mounted on the left or right.
- Includes snap-latch lock and two keys.
- Includes door mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HWCVD3027UBK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Finger Cable Manager with Door H1VFM Series – (H1VFMC3145UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Finger Cable Manager with Door H1VFM Series – (H1VFMC3145UBK)
Features
- Constructed in 16-Gauge Steel.
- Formed plastic fingers with a removable aluminum door.
- Mounts to mounting rails vertically inside Hammond H1 rack cabinets.
- Available in three widths.
- Designed to work with our H1 cabinet series.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: H1VFMC3145UBK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Finger Cable Manager with Door H1VFM Series – (H1VFMC3045UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Finger Cable Manager with Door H1VFM Series – (H1VFMC3045UBK)
Features
- Constructed in 16-Gauge Steel.
- Formed plastic fingers with a removable aluminum door.
- Mounts to mounting rails vertically inside Hammond H1 rack cabinets.
- Available in three widths.
- Designed to work with our H1 cabinet series.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: H1VFMC3045UBK -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1923F4LG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1923F4LG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1923F4LG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2423F4TBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2423F4TBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2423F4TBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T1923F4BK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T1923F4BK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T1923F4BK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (CDF1956SLG1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CDF1956SLG1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (CDF1956SBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CDF1956SBK1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (CDF1956LLG1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CDF1956LLG1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
C2 Doors CDF Series – (CDF1956LBK1)
Features
- Constructed in 16-gauge steel.
- Easily installs into C2 Series cabinets using integrated spring pin at top and bottom of the door.
- Includes formed plastic handle, quarter-turn lock and hinges to mount on the cabinet.
- Available in Solid, Windowed and Perforated and Split Perforated options.
- Finished in textured RAL9005 black or RAL7035 light gray powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: CDF1956LBK1 -
Doors, Hammond, Rack Accessories, Rack Mounting Solutions
HWC Locking Door HWCD Series – (HWCWD3012UBK)
Doors, Hammond, Rack Accessories, Rack Mounting SolutionsHWC Locking Door HWCD Series – (HWCWD3012UBK)
Features:
- 16-gauge steel construction.
- Door styles available solid, tinted acrylic with venting, 64% airflow vented.
- For use with the Hammond HWC Series.
- In addition, the hinges can be mounted on the left or right.
- Includes snap-latch lock and two keys.
- Includes door mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: HWCWD3012UBK -
Cable Managers, Hammond, Rack Accessories, Rack Mounting Solutions
Vertical Cable Manager with Door C4VCM Series – (C4VFMC3042UBK)
Cable Managers, Hammond, Rack Accessories, Rack Mounting SolutionsVertical Cable Manager with Door C4VCM Series – (C4VFMC3042UBK)
Features
- Constructed in 16-Gauge Steel.
- Formed cable manager’s body with the door.
- Mounts vertically inside Hammond rack cabinets.
- Available in three heights.
- Designed to work with our C4 and DCZ4 cabinet series.
- Includes mounting hardware.
- Finished in textured RAL9005 black powder paint finish.
- TAA-compliant for GSA Schedule purchases.
- RoHS and REACH compliant.
- Manufactured in North America.
SKU: C4VFMC3042UBK -
Hammond, Rack Mounting Solutions, Server Racks and Cabinets
Modular Server Rack Cabinet C4 Series – (C4SP4231SBK1)
Hammond, Rack Mounting Solutions, Server Racks and CabinetsModular Server Rack Cabinet C4 Series – (C4SP4231SBK1)
When you prefer complete flexibility, our modular C4 series allows you to select every feature. We can ship the components to you for assembly*, we can assemble the cabinet for you or you can choose from some of our popular pre-assembled cabinets, here.
Available Options Include:
- 24U, 42U and 44U mounting heights.
- 24″ and 30″ overall frame widths.
- 24” wide frame includes generous cabling space and four (4) 3.5” wide cable entry holes on the top.
- 30” wide frame includes extra generous cabling space and support for up to four optional vertical cable managers
- 31.5″, 36″ and 42″ overall frame depths.
- All frames include four (4) levelling feet and support optional casters.
- 19″ and 23″ mounting rails are available in square-hole punched or drilled and tapped 10-32.
- Flush-mounted doors with quarter-turn lock available in solid, tinted window, vented full or split/barn.
- Side panels are available in both solid and vented for thermal induction.
- One (1) interchangeable top panel opening; available in solid, vented, fan tops with or without fans installed.
- One (1) interchangeable bottom panel opening, available in solid.
- Vertical cable managers are available in-tray, enclosed metal or fingers versions.
Specifications
- Cabinet frame constructed in 14-gauge steel with 12-gauge steel reinforced corner brackets.
- Cabinet doors and side panels constructed in 16-gauge steel.
- 19″ mounting rails are constructed in 12-gauge steel (square hole punched) or 10-gauge steel (drilled and tapped 10-32).
- Rails include rack unit indicators and are Zinc-plated to provide superior surface areas for equipment grounding.
- C-channel struts provide cabinet strength, ease and flexibility to adjust mounting rails.
- *When assembled by Hammond, the cabinet is UL Listed 2416 load rated for up to 3,000 lbs (1,360 kg). Static Load tested to 12,000 lbs (5,443 kg).
- Seismic rated up to 1,200 lbs (544 kg) of dynamic load with an Ip factor of 1.5 in accordance with the IBC 2018, CBC 2019, NBC 2018, ASCE 7-16 and ASCE 7-10.
- Grounding studs are provided on the frame as well as side panels and doors. Front and rear studs on cabinet frame conform to PET.
- Finished in textured RAL9005 black powder paint.
- Meets PCI DSS (Payment Card Industry Data Security Standard) compliance requirements.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America within an ISO 9001:2015 certified facility.
Build your own cabinet configuration usingQ-Assembly
Click here to view our Pre-Assembled C4RR Cabinet Series.
SKU: C4SP4231SBK1 -
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2436F4TLG1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2436F4TLG1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2436F4TLG1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
-
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting Solutions
Fan Top Panel C2TF Series – (C2T2436F4TBK1)
Cabinet Top Panels, Hammond, Rack Accessories, Rack Mounting SolutionsFan Top Panel C2TF Series – (C2T2436F4TBK1)
Features
- Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
- H1 requires H1TC Series for mounting.
- 14 gauge steel construction.
- Includes 8-32 Screw and Clip-nut cabinet fastening hardware.
- cURus recognized to UL507 and CSA C22.2 No.113.
- TAA-compliant for GSA Schedule purchases.
- RoHS Compliant.
- Manufactured in North America.
Fan Tops for use with 4″ Fans:
- 4″ fan top panel – fans not included (see first table below).
- 4 or 6 openings depending on the depth of the rack.
- Maximum flexibility – add fans OR leave holes open (for cable access) OR use covers (see below) OR any combination.
Pre-Wired Fan Tops:
- Available with (4) 4″ fans or (1) 10″ fan (factory wired).
- Long life, ball bearing, 4″, 115 volts, 50/60 Hz. AC fan(s).
- Available in three depths and two colors.
- 4.7″ versions are available with or without adjustable thermostats.
- 10″ versions are available with or without cable entry holes.
SKU: C2T2436F4TBK1 - Use with C2, C2RR, C4, C4RR, H1 or CLC cabinet series.
