(Part Number: TA 24-1H6) – Hydro-Flo™ Jet Assembly with 2-Piece Jet – 180-Degree Fan Spray – 0.06 in. Nozzle – 24 in. Vinyl Tubing with 1/4 in. Barbed Inlet on 12 in. Stake – 100-Pack – Hydro-Flo™ Jets and Assemblies – Jets and Assemblies for Flowerpot Watering – Targeted Spray Irrigation – Made in America – NDS

Key Features

• Available with 10-32 threaded inlet or 1/4 in. barbed inlet
• Jet assemblies include spray jet with 1/4 in. barbed inlet, nozzle, 24 in. vinyl tubing, and 12 in. stake
• Choose from 90°, 180°, 360° fan spray or 360° stream spray
• Nozzle sizes: 0.03, 0.04, 0.05, and 0.06; larger nozzle sizes discharge water at a higher GPH with a longer radius 
• Designed to work with standard drip irrigation water pressures up to 35 PSI

Applications

• Releases water with a fan or stream spray for low-volume, overhead irrigation
• Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
• As part of a complete drip irrigation system, the jet-spray delivers water gradually; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source

Materials & Sustainability

• Emitter made of polyethylene treated with UV inhibitors to prevent fading and cracking
• Drip irrigation can reduce water usage by up to 70% compared to conventional sprinkler irrigation when used properly; for most drip irrigation products, water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion

Installation & Maintenance

• For barbed inlets: attach 1/4 in. barbed inlet found at end of 1/4 in. tubing into a punched hole in supply tubing, and insert stake into desired location in the ground
• For 10-32 threaded inlets: attach inlet onto a riser; connect 1/4 in. distribution tubing (A220 and A250) or 1/4 in. Dura Flo™ JR dripline to inlet barb on riser; lift riser and emitter with stake
• Periodically check for damage or leaks and repair as needed; recommended operation pressure is up to 35 PSI