InnerDuct, Lubricants, Wipes
(Part Number – S-1) Polywater® Type S-1™ Cleaner and Water-Repellent Wipe – Saturated wipe in sealed foil pouch – Lubricant – Wipes – Polywater
Download Spec Sheet
Saturated wipe in sealed foil pouch
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
For the maintenance and protection of live-line hot sticks and fiberglass tools.
Polywater® Type S-1™ Wipes help meet the daily requirement to inspect and clean hot sticks prior to each use. The wipes safely remove contaminants that contribute to tracking hazards, and then leave hot sticks with a protective silicone coating. Polywater Type S-1 is also effective at cleaning and coating telescoping sticks and fiberglass rodders so they glide into conduits without sticking.
Overview
COMPLIANT
Meets IEEE Std #978 and OSHA 29 CFR Part 1910 guidelines
EFFECTIVE
Removes grease, dust, and grime while leaving a protective water-repelling silicone layer
BEADS WATER
Silicone coating prevents continuous conductive water on hot stick in wet weather
GEL COAT SAFE
Does not remove or affect the gel coat on live-line tools
CONVENIENT
Clean and protect with one-time-use towelettes
Brand
Polywater
Related products
-
Couplers, InnerDuct, InnerDuct Accessories
1.00″ Clear-Lock PinPoint Splice Kit Couplers – DuraLine
*Please note there may be minimums requirements for all types of innerduct
The Clear-Lock Couplers and PinPoint Splices in one simple package. All the advantages of the Clear-Lock couplers with water-tight connectors for the PinPoint locatable duct in one simple kit. A 2.50″ kit is also available with our new Redi-Lock coupler.SKU: 20005752 -
Couplers, InnerDuct, InnerDuct Accessories
1.50″ Shur-Lock II Coupler SDR 1.900″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000122 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000036 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Polyester Pull Tape WP05 10000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line 100% Polyester Pull Tape provides a competitive solution for applications that require a high tensile strength and low elongation. Bull-Line Pull Tape is lightweight and has good blowability. Bull-Line Pull Tape has low burn through resistance in comparison to other brands. An added benefit of all Bull-Line Pull Tapes are the durable print and sequential markings, in both feet or meters, for accurate locating during installation. Bull-Line Pull Tape is made in the USA.SKU: 20000043
