InnerDuct, Lubricant, Lubricants
(Part Number – WX-128) Polywater® WX Wax Cable Pulling Lubricant – 1-gal/3.8-liter pail – Lubricant – Lubricant – Polywater
Download Spec Sheet
1-gal/3.8-liter pail
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
Wax-Based, Slow-Drying Lubricant for Pulling Wire & Cable
Polywater® WX Wax-Based Cable Pulling Lubricant is a significant improvement over older-style wax lubricants. It is temperature stable and does not liquefy and drip off after high-temperature exposure. Polywater® WX wax pulling lubricant is clean and slow drying. It leaves less residue in the conduit to block future cable pulls or removal. Polywater WX Wax Lubricant is environmentally safe and non-toxic. Unlike many wax pulling lubricants, it is compatible with a broad variety of cable jackets, including polyethylene types.
Overview
FRICTION REDUCTION
Lowers pulling tension while increasing installation distance
TEMPERATURE STABLE
Withstands storage in hot environments or exposure to multiple freeze thaw cycles without separating and becoming watery and unusable
COMPATIBLE
Suitable for most cable jackets, including polyethylene types
EASY TO APPLY
Can be applied by hand because of its thick gel formulation
Brand
Polywater
Related products
-
Couplers, InnerDuct, InnerDuct Accessories
4.00″ Shur-Lock II Coupler SDR 4.500″ – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Shur-Lock II is a plastic coupler designed for coupling HDPE & PVC conduit. Can also be used to couple dissimilar conduits such as HDPE to PVC, threaded or non-threaded metal conduit, or fiberglass (FRP) conduit. The coupler features stainless steel band clamps (hand tightened using a 5/16″ nut driver) and locking ring. A pre-lubricated O-ring forms an air-tight seal to withstand 125 PSI on 1″ – 3″ sizes. Also a specialized coupler for use by electrical installers requiring ETL/UL listing.SKU: 20000245 -
Couplers, InnerDuct, InnerDuct Accessories
0.75″ Clear-Lock Coupler – Dura-Line
*Please note there may be minimums requirements for all types of innerduct
Experience the same fast and easy installation of our Push-Lock couplers now with a new, clear body design. Simply push the duct ends into the coupler for a locked and air-sealed assembly. Slightly shorter than the original Push-Lock, the Clear-Lock is ideal for pull boxes, vaults or other limited access areas. The non-metallic construction provides excellent corrosion resistance in buried or encased applications and also has desirable dielectric properties.SKU: 20005661 -
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPE
EPEC 13.5 1/2” NEMA TC7 Standard HDPE – Duraline NEMA TC7 HDPE InnerDuct – Duraline EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 NEMA TC7 HDPE InnerDuct
Conduit, DuraLine, InnerDuct, NEMA TC7, Standard HDPEEPEC 13.5 1/2” NEMA TC7 Standard HDPE – Duraline NEMA TC7 HDPE InnerDuct – Duraline EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 1/2” NEMA TC7 HDPE InnerDuct – 1/2” NEMA TC7 HDPE InnerDuct – EPEC 13.5 NEMA TC7 HDPE InnerDuct
*Please note there may be minimums requirements for all types of innerduct
Our HDPE conduit made in accordance with requirements of NEMA TC-7 and is ideal for the installation and protection of electrical cables underground.SKU: DL-SHDPE-NEMATC7-1/2-EPEC-13.5 -
InnerDuct, InnerDuct Accessories, Pull Tape
Bull-Line Aramid Woven Pull Tape WK18 3000ft
*Please note there may be minimums requirements for all types of innerduct
Bull-Line Aramid Pull Tape offers the highest tensile strength per widths along with low elongation. These tapes are also sequentially marked in feet or meters for accurate installation measurements. Bull-Line Aramid Pull Tape is made in the USA.SKU: 20000036
