ITS/Traffic Accessories, Multilink, Uninterruptible Power Supplies
(Part Number: 010-502-10) – Power Transfer Device for Traffic UPS, 120v, Screw Terminal Block – Uninterruptible Power Supplies – ITS/Traffic Accessories
Manual bypass switch (panel transfer device) that is compatible with the EP2200-T. Allows for maintenance to be done on UPS and batteries without loss of power to the load.
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
SPECS
| General Specifications | |
| Input Connection |
Terminal Block |
| Output Connection |
1″> 6 foot line cords ready for hard wiring to UPS terminal block Terminal Block |
| PTS Transfer Time |
1″> < 65 ms Buck & Boost mode < 10ms |
| Frequency |
60Hz ±3Hz |
| Input Specifications | |
| Step Load Response |
1/2 Cycle Full Recovery (Full resistive load) |
| Short Circuit Protection |
15A Circuit Breaker |
| Battery String Voltage |
48VDC (Four 12VDC Battery) |
| Voltage Range |
100~130VAC (120VAC Nominal) Prog. 90-150VAC |
| Current Capacity |
30A |
| Physical Specifications | |
| Width |
1″> 4.75″ 120.6mm |
| Height |
1″> 4.6″ 116.8mm |
| Depth |
1″> 6.5″ 165mm |
| Weight |
7 lbs |
| Output Specifications | |
| Load Crest Factor |
3:1 (Max) |
| Power VA/W |
2000VA/1500W |
| Output Voltage |
100~130 +/- 2VAC |
| Overload Capacity |
110% for 3 minutes |
| Output Waveform |
Sine Wave |
| Inverter Mode |
120VAC +/- 5% |
| Output Waveform THD |
< 3% (Resistive Load) |
| Power Factor |
0.75 |
| Mechanical Specifications | |
| Mounting |
Rack Mount EARS, 4 points optional 19″ rack mount |
| Environmental Specifications | |
| Storage Temperature Range |
-50°C to 75°C |
| Altitude (Note 2) |
10,000ft/3,000m |
| Cooling |
Convection (Approx. 7 with contractor coil dissipation) |
| Operating Temperature |
-34°C to +74°C |
| Operating Humidity Level |
0-95% Non Condensing |
| Safety Standard Specifications | |
| Surge Immunity |
IEC 1000-4-5 |
| EMI |
FCC Class A |
