(Part Number: NIHAPL000287) – 5/16″ Helical Deadend – Aerial Materials – Preformed Line Products

Helical Dead-ends, installed at the top, the breaker and the anchor, provide today’s most effective method for securing guy strand. This unique, one-piece dead-end is neat in appearance and free from bolts or high stress holding devices.

Dead-ends are made of the same material as the strand to which they are applied. They should be used on hardware that is held in a fixed position. The fitting should not be allowed to rotate or spin about the axis of the strand. They should not be used as tools including come-alongs, pulling-in grips, etc.

Nomenclature:

• Cross-over Marks: (A) Indicates the starting point for application on smaller diameter fittings. (B) Indicates alternate starting point for application on larger diameter fittings.
• Cabled Loop: Furnished as standard, all sizes.
• Pitch Length: One complete wrap.
• Short Leg-Long Leg: Identifies rods belonging to each leg, after application.
• Color Code and Length: Assists in identification of strand size, corresponding to tabular information appearing on price page.
• Identification Tape: Shows catalog number, nominal sizes.

Coating:
B-Coat

Color:
Black

Height [in]:
1

Width [in]:
1

Length [mm]:
788

Shipping Height [in]:
.5

Shipping Length [in]:
31

Shipping Method:
Parcel

Shipping Width [in]:
.5

Unit of Measure:
EA.

Units Per Package:
60

Weight [lb]:
0.780000

Weight [lb]:
.78