(Part Number – 89073) Air Cooler for Compressors up to 400 CFM with 12V Fan

The 400CFM Compressor Aftercooler has been designed to cool compressed air and remove water droplets prior to entering a GMP Cable Blowing Machine

• Features a heavy-duty moisture separator with manual drain for removal of trapped moisture and condensed oil
• Completely self-contained and packaged in a construction skid with a lifting bail and expanded metal heat exchanger guard
• Boss outlet fitting (Boss 28) and inlet fittings (1-1/2 in. Pipe) are standard
• DC fan motor is run from the compressor battery and automatically starts when the system is pressurized
• 13-foot power cord with alligator clips to connect to the compressor starting battery
• Optional 1-micron coalescing filter available
• Adaptable stand-alone or tongue-mount design
• Compact installation does not interfere with vehicle tailgates, etc.
• Cools air to within 20° of ambient temperature to optimize moisture removal
• Available in either 12 or 24 volt versions

SPECIFICATIONS: Length: 24 in. (610 mm) Width: 44 in. (1118 mm) Height: 30 in. (762 mm) Weight: 170 lbs. (77 kg) Fan Power Requirments 9 A, 24 VDC  Max Working Pressure  200 psi (13.9 bar) Max Air Compressor Flow Rate 400 cfm (11 M³/Min) Air Hose Connections Output: Boss 28 Input: 1-1/2 in. Pipe
Note: The aftercooler™s fan voltage must be selected to match the compressor™s battery voltage. The following chart shows some compressor manufacturers and the corresponding typical battery voltages: 24 volt-Doosan/Ingersoll Rand Please confirm the compressor™s battery voltage in your specific application before ordering the aftercooler.

Cable Diameter Range [in]:
0.142, 0.150, 0.177

Cable Diameter Range [mm]:
3.6, 3.8, 4.5

Maximum Pressure bar:
13.9

Maximum Pressure [PSI]:
200

Shipping Method:
LTL

Unit of Measure:
EA.

Weight [lb]:
170.000000

Weight [lb]:
170

Width [in]:
31