Belden, Coax & Triax Cable, Wire & Cable
3131A – ControlBus, Coax RG6, #18 Sol BCCS, PO Ins, QUAD AL Shld, PVC Jkt, CMR
Call for Price
This product requires special shipping arrangements. Please Use the "ADD TO QUOTE BUTTON" or call us at (866) 650-3282 for more information.
Compare
Product Overview
| Suitable Applications: | harsh environment, factory automation, ControlNet, Modbus II, Industrial Coax, Belden ControlNet cables provide maximum signal integrity and run length exceeding the high-speed, time-critical requirements necessary for ControlNet factory floor applications |
Physical Characteristics (Overall)
Conductor
| AWG | Stranding | Material | Nominal Diameter | No. of Coax |
|---|---|---|---|---|
| 18 | Solid | BCCS – Bare Copper Covered Steel | 0.04 in | 1 |
| Conductor Count: | 1 |
Insulation
| Material | Nominal Diameter |
|---|---|
| PE – Polyethylene (Foam) | 0.18 in |
| Table Notes: | Gas Injected |
Outer Shield
| Type | Layer | Material | Material Trade Name | Coverage [%] |
|---|---|---|---|---|
| Tape | 1 | Tri-Laminate (Alum+Poly+Alum) | Duofoil® | 100% |
| Braid | 2 | Aluminum | 60% | |
| Tape | 3 | Tri-Laminate (Alum+Poly+Alum) | Duofoil® | 100% |
| Braid | 4 | Aluminum | 40% |
Outer Jacket
| Material | Nominal Diameter |
|---|---|
| PVC – Polyvinyl Chloride | 0.301 in |
Electrical Characteristics
Conductor DCR
| Nominal Conductor DCR | Nominal Outer Shield DCR | Outer Conductor DCR |
|---|---|---|
| 28 Ohm/1000ft | 3.6 Ohm/1000ft | 3.6 Ohm/1000ft |
Capacitance
| Nom. Capacitance Conductor to Shield |
|---|
| 16.2 pF/ft |
Inductance
| Nominal Inductance |
|---|
| 0.097 µH/ft |
Impedance
| Nominal Characteristic Impedance | Nominal Characteristic Tolerance |
|---|---|
| 120 Ohm | ± 3 Ohm |
High Frequency (Nominal/Typical)
| Frequency [MHz] | Nom. Insertion Loss |
|---|---|
| 1 MHz | 0.35 dB/100ft |
| 2 MHz | 0.38 dB/100ft |
| 5 MHz | 0.45 dB/100ft |
| 10 MHz | 0.59 dB/100ft |
| 20 MHz | 0.86 dB/100ft |
| 50 MHz | 1.37 dB/100ft |
| 100 MHz | 1.97 dB/100ft |
| 200 MHz | 2.82 dB/100ft |
| 300 MHz | 3.48 dB/100ft |
| 400 MHz | 4.04 dB/100ft |
Delay
| Nominal Delay | Nominal Velocity of Propagation (VP) [%] |
|---|---|
| 1.2 ns/ft | 82% |
Phase Delay Distortion
| f/B | %PDD/100M (5MB) |
|---|---|
| 0.5 | -1.03 |
| 1 | -0.3 |
| 1.5 | 0 |
| 2 | 0.2 |
| 2.5 | 0.4 |
High Frequency
| Frequency [MHz] | Min. SRL (Structural Return Loss) |
|---|---|
| 1 MHz | 23 dB |
| 2 MHz | |
| 5 MHz | |
| 10 MHz | |
| 20 MHz | |
| 50 MHz | |
| 100 MHz | |
| 200 MHz | |
| 300 MHz | |
| 400 MHz |
| Electrical Characteristics Notes: | Tilt 5 to 10 MHz: 0.53 dB/100 M |
| Other Electrical Characteristic 2: | Tilt 10 to 20 MHz: 0.89 dB/100 M |
| Other Electrical Characteristic 3: | SRL Min. 23dB (5MHz – 50MHz) |
Temperature Range
| UL Temp Rating: | 75°C |
| Operating Temperature Range: | -30°C To +75°C |
Mechanical Characteristics
| Bulk Cable Weight: | 33 lbs/1000ft |
| Max. Pull Tension: | 162 lbs |
| Min. Bend Radius/Minor Axis: | 3 in |
Standards
| NEC Articles: | Article 800 |
| NEC/(UL) Compliance: | CL2R, CMR |
| CEC/C(UL) Compliance: | CMG |
| CPR Euroclass: | Eca |
| IEEE Compliance: | 802.4 MAP, 802.7 MIni-MAP |
| RG Type: | 6 |
Applicable Environmental and Other Programs
| EU Directive 2000/53/EC (ELV): | Yes |
| EU Directive 2003/11/EC (BFR): | Yes |
| EU Directive 2011/65/EU (RoHS 2): | Yes |
| EU Directive 2012/19/EU (WEEE): | Yes |
| EU Directive 2015/863/EU (RoHS 2 amendment): | Yes |
| EU Directive Compliance: | EU Directive 2003/11/EC (BFR) |
| EU CE Mark: | Yes |
| MII Order #39 (China RoHS): | Yes |
Flammability, LS0H, Toxicity Testing
| UL Flammability: | UL1666 Riser |
| CSA Flammability: | FT4 |
| UL voltage rating: | 300 V RMS |
Plenum/Non-Plenum
| Plenum (Y/N): | No |
| Plenum Number: | 3132A |
Related Part Numbers
Variants
| Item # | Color | Put-Up Type | Length | UPC |
|---|---|---|---|---|
| 3131A F2V1000 | Gray, DEC | Reel | 1,000 ft | 612825142058 |
Product Notes
| Notes: | Sweep tested 5 to 400 MHz. Tap Marks Every 2.6 Meters to aid in users installation. |
History
| Update and Revision: | Revision Number: 0.451 Revision Date: 07-19-2023 |
Related products
-
Belden, Cable, Category 6A Cable, Ethernet Cable
DataTuff® Cat 6A, 4P23AWG, S/FTP, Solid Bare Cu, FMPE Ins, SWB, LSZH Jkt, UV resistant (Category 6A Cable) – Belden (50106ASFLB)
Belden, Cable, Category 6A Cable, Ethernet CableDataTuff® Cat 6A, 4P23AWG, S/FTP, Solid Bare Cu, FMPE Ins, SWB, LSZH Jkt, UV resistant (Category 6A Cable) – Belden (50106ASFLB)
DataTuff® CAT 6A 4PR x 23AWG S/FTP, Solid Bare Copper Conductor, FMPE Insulation, AL-Mylar Individual Shield, Overall Tinned Copper Braid Shield, LSZH Inner Jacket, Steel Wire Braid Armoring, LSZH Outer Jacket, Indoor/Outdoor
Our Category 6A Copper Cable offers a wide range of options for your CAT 6A network. Some options that are available include small diameter, snake, industrial, non-bonded, and patented Bonded-Pair. The 10GXS Cable is the industry’s gold standard for performance, while, Belden’s newest cable, 10GXW, is the industry’s smallest-diameter Category 6A cable designed for smart building and multi-gigabit applications with performance optimized for in-building wireless networks.SKU: BELDEN-50106ASFLB -
Belden, Cable, Category 6 Cable, Ethernet Cable
CAT6 Patch, 4pr, UTP, PVC Jkt, CMR (Category 6 Cable) – Belden (7883A)
Belden, Cable, Category 6 Cable, Ethernet CableCAT6 Patch, 4pr, UTP, PVC Jkt, CMR (Category 6 Cable) – Belden (7883A)
CAT6 (250MHz), 4-Pair, U/UTP-unshielded, Riser-CMR, Premise Patch cable, 24 AWG solid bare copper conductors, polyolefin insulation, central filler, PVC jacket, RG-45 compatible
Belden offers several Category 6 performance levels, including our REVConnect 3600 System cable with premium performance offering significant headroom, and our REVConnect 2400 System cable. Every level exceeds TIA-568-C.2 performance and is produced with Belden’s superior quality. Bonded-Pair technology is an option to make your installation as robust as possible.SKU: BELDEN-7883A -
Belden, Cable, Category 5e Cable, Ethernet Cable
DataTuff® 5E, 1Q #22 Str TC, PO ins, F/B, LSNH Jkt, PROFINET Type B UL AWM 21286 (Category 5e Cable) – Belden (70007NH)
Belden, Cable, Category 5e Cable, Ethernet CableDataTuff® 5E, 1Q #22 Str TC, PO ins, F/B, LSNH Jkt, PROFINET Type B UL AWM 21286 (Category 5e Cable) – Belden (70007NH)
DataTuff® 5E, 1 Quad AWG 22 Tinned Copper – Stranded, Polyethylene insulation, SF/UTP – Overall Braid + Foil shielding, LSZH / FRNC jacket , PROFINET Type B UL AWM 21286
Ensure maximum network performance and stability in legacy IP applications, renovations and price-sensitive environments with Category 5e cables that exceed standards. Belden offers several Category 5e performance levels. Our top-of-line 1200 Series cable provides headroom beyond the TIA-568-C.2 Category 5e standard and is offered with Bonded-Pair technology to make your installation as robust as possible.SKU: BELDEN-70007NH -
Belden, Cable, Category 5e Cable, Ethernet Cable
DataTuff® 5E, 1Q #22 Sol BC, PO ins, F/B, LSNH Jkt, PROFINET Type A, AWG 21286 (Category 5e Cable) – Belden (70006NH)
Belden, Cable, Category 5e Cable, Ethernet CableDataTuff® 5E, 1Q #22 Sol BC, PO ins, F/B, LSNH Jkt, PROFINET Type A, AWG 21286 (Category 5e Cable) – Belden (70006NH)
DataTuff® 5E, 1 Quad AWG 22 Bare Copper – Solid, Polyethylene insulation, SF/UTP – Overall Braid + Foil shielding, LSZH / FRNC jacket , PROFINET Type A, AWG 21286
Ensure maximum network performance and stability in legacy IP applications, renovations and price-sensitive environments with Category 5e cables that exceed standards. Belden offers several Category 5e performance levels. Our top-of-line 1200 Series cable provides headroom beyond the TIA-568-C.2 Category 5e standard and is offered with Bonded-Pair technology to make your installation as robust as possible.SKU: BELDEN-70006NH